• Journal of Korea Water Resources Association
• /
• v.43 no.7
• /
• pp.635-643
• /
• 2010

A representative unit hydrograph responding to a small basin is used to calculate the flood discharge in the basin. The peak discharge and the time to peak of the unit hydrograph are dealt with its characteristic values. In this study it is shown and analyzed the fluctuations at peak discharges and times to peak of unit hydrographs by rainfall storms in a small national basin $8.5\;km^2$ wide are no small. And on assumption that a major factor in the fluctuations of the unit hydrographs in a small basin be rainfall intensity of a rainstorm, both relations of peak discharge and time to peak with rainfall intensity are suggested as exponential functions respectively. In this result although it is a limit of the study in which its result is accompanied with not small dispersion in the peak values of unit hydrograph due to a defect in used data it is sure an averaging regression relation between peak discharge and time to peak with rainfall intensity as identified in this study has hydrological worth from the complementary viewpoint of the theory of unit hydrograph.

• Journal of Korean Society of Transportation
• /
• v.23 no.2
• /
• pp.151-160
• /
• 2005

In case of public transit such as bus system, the probability concept is used to evaluate the Level-of-Service of the operations. And each levels could be classified according to the linear probability value. (TCQSM: Transit Capacity and Quality of Service Manual-2nd Edition, TRB, Washington DC., 2003) In this case, the drivers or passengers wouldn't think that the service level isn't equivalent to the linear probability value. Thus the linear probability value doesn't exactly reflect the service level. This study shows the problems of using the linear probability value in classifying the service level through the case of evaluation of bus operation's punctuality, presented in TCQSM. To make up for the problems of such case, two methodologies are presented in this study. The method of determining Level-of-Service criteria using probability density of headway variation's distribution, presented in this paper, adequately reflects passenger's expected waiting time. According to the application result to real bus operation data, it tis better than the method of TCQSM to evaluate the reliability of bus operations. However further research about the relations between utility difference and passenger feeling of service level in necessary to apply the method that uses the utility function. It remains as the limitation of this paper.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.1
• /
• pp.5-12
• /
• 2011

In this study, correlation between measured deformation modulus using pressuremeter and RMR value conducted in 10 sites is analyzed, and applicability of the conventional empirical formulas to the rock masses in Korea are analyzed, It is found that if RMR is below 40, the correlation between deformation modulus and RMR accords Kim Gyo-won's formula and Aydan, Serafim and Pereira's one well, but if the RMR exceeds 40, the correlation was lower than those from the formula. Such results may be attribute to the fact that during classification of RMR, scores are weighed relatively more in joint conditions and apertures than such highly correlational items as uniaxial compression strength or RQD, and RMR would not be evaluated qualitatively due to different weathering degrees and rock mass types as well as engineers' personal errors. Sandstone among sedimentary rocks are quite well accord with suggested equation, but correlation of other rocks are due to large variance. In this study, correlation expressions of various rocks are proposed as the function of exponential based on the field test data.

• The Korean Journal of Applied Statistics
• /
• v.10 no.1
• /
• pp.69-84
• /
• 1997

We consider a linear calibration problem, $y_i = $$\alpha + \beta (x_i - x_0) + \epsilon_i$, $i=1, 2, {\cdot}{\cdot},n$ $y_f = \alpha + \beta (x_f - x_0) + \epsilon, $ where we observe $(x_i, y_i)$'s for the controlled calibration experiments and later we make inference about $x_f$ from a new observation $y_f$. The objective of the calibration design problem is to find the optimal design $x = (x_i, \cdots, x_n$ that gives the best estimates for $x_f$. We compare Kim(1989)'s Bayesian design which minimizes the expected value of the posterior variance of $x_f$ and some optimal designs from literature. Kim suggested the Bayesian optimal design based on the analysis of the characteristics of the expected loss function and numerical must be equal to the prior mean and that the sum of squares be as large as possible. The designs to be compared are (1) Buonaccorsi(1986)'s AV optimal design that minimizes the average asymptotic variance of the classical estimators, (2) D-optimal and A-optimal design for the linear regression model that optimize some functions of $M(x) = \sum x_i x_i'$, and (3) Hunter & Lamboy (1981)'s reference design from their paper. In order to compare the designs which are optimal in some sense, we consider two criteria. First, we compare them by the expected posterior variance criterion and secondly, we perform the Monte Carlo simulation to obtain the HPD intervals and compare the lengths of them. If the prior mean of $x_f$ is at the center of the finite design interval, then the Bayesian, AV optimal, D-optimal and A-optimal designs are indentical and they are equally weighted end-point design. However if the prior mean is not at the center, then they are not expected to be identical.In this case, we demonstrate that the almost Bayesian-optimal design was slightly better than the approximate AV optimal design. We also investigate the effects of the prior variance of the parameters and solution for the case when the number of experiments is odd.

• Korean Journal of Environment and Ecology
• /
• v.22 no.3
• /
• pp.289-300
• /
• 2008

This study aims to discriminate differences in natural landscapes between the Cairngorms National Park in Scotland and the Jirisan National Park in Korea, using functions of content-based image retrieval such as texture, shape, and color. Digital photographs of each National Park were taken and selected. The low-level functions of photographic images were reduced to orthogonally rotated five factors. Based on the reduced factors, a linear decision boundary was obtained between Cairngorms landscapes and Jirisan landscapes. As a result, the discriminant function significantly delineated two groups, resulting in $x^2=63.40$ with df=5(p<0.001). Both the eigenvalue 2.417 and the value of wilks' lambda 0.29 supported that the most proportion of total variability came from the differences between the means of discriminant function of groups. It was estimated that four independent variables explained about 70.7% of total variance of dependent variable. The variable with the largest effect on landscapes was far region-related factor(r=1.07), followed by near region-related factor (r=0.90). A total of 90.7% of cross-validated grouped cases were correctly classified. It was interpreted that far distant regions, as well as near distant regions, had sufficient discrimination power for landscape classification between the Cairngorms National Park and the Jirisan National Park, so that landscape identity of the National Park over cultures was revealed by skylines in a most effective way. Relatively fewer factors making visual landscapes were effectively used to classify natural landscapes of the National Parks which had different semantics.

• Resources Recycling
• /
• v.29 no.3
• /
• pp.11-23
• /
• 2020

This study aims to investigate breakage and liberation characteristics of iron ore from Shinyemi mine, Jeongseon by ball mill. Parameters of breakage functions for three grade samples of iron ore were obtained using single-sized-feed breakage test and back-calculation based on nonlinear programming. The results showed that with the increase in the grade of iron ore, the breakage rate factor decrease whereas the particle size sensitivity decreases. This results from retardation of microcrack-propagation by magnetite grain in the ore. Breakage distribution analysis showed that the breakage mechanism appear to be impact fracture dominant with the increase of grade owing to the stress distribution effect by magnetite grain. Degree of liberation (DOL) increased with the increase in grade and decrease in particle size, respectively. Using the breakage function and size-DOL relationship, a model that can predict time-dependent-DOL is established. When scale-up factors from operating condition are available, the model is expected to be capable of predicting size and DOL with time in actual mining process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.468-476
• /
• 2020

This study investigated how latent groups depend on the longitudinal trajectories observed in fathers' involvement in parenting over a five year period, and the study also determined differences in children's behavioral problems and mother's parenting stress, marital satisfaction, and depression among these groups. By utilizing 1,316 sets of data from 1st to 5th Panel Survey of PSKC beginning in 2008, we examined the patterns of the latent groups and the differences among them. The results showed that, first, a changing pattern of fathers' involvement in parenting is classified into four groups: a low-stable group, a decreasing group. a middle-high changeable group, and a highest changeable group. According to the results of the latent groups, the fathers' involvement in parenting commonly started to decrease at the children's age of 4 years old. Second, problematic behaviors of children appeared more from the fathers in the decreasing group. Third, parenting stress, marital conflict, and depression were more often found in the low-stable group that in the decreasing group. the middle-high changeable group and the highest changeable group (in that order), while marital satisfaction showed a completely opposite pattern. Based on these results, political intervention and the future direction of research for fathers' involvement in parenting are needed in order to increase better behaviors of their children as well as the psychological well-being of their mothers.

• Journal of Digital Convergence
• /
• v.13 no.9
• /
• pp.209-218
• /
• 2015

Computer simulation plays an important role for a theoretical foundation in convergence technology and the interpolation is to know the unknown values from known values on grid points. Therefore it is an important problem to select an interpolation method for digital simulation. The aim of this paper is to compare analysis of interpolation methods for digital simulation. we test six different interpolation methods namely: Quartic-Lagrangian, Cubic Spline, Fourier, Hermit, PWENO and SL-WENO. Through digital simulation of a linear advection equation, we analyse pros and cons for each method. In order to compare performance, we introduce accuracy computing and Error functions. The accuracy computing is used well-known $L^1-norm$ and the Error functions are dispersion function, dissipation function and total error function. High-order methods well apply to computer simulation, unfortunately, side-effects (Oscillation) happen.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.105-105
• /
• 2012

최근 우리나라는 집중호우로 인한 토석류의 발생이 현저하게 증가하고 있으며, 2002년 태풍 루사와 2003년 매미 그리고 2006년 7월 집중호우 등으로 인한 피해의 규모는 여러 조사와 문헌에서도 확인할 수 있다. 2011년 7월, 서울 우면산 일대에서는 집중호우로 인한 토석류가 발생하였으며, 16명의 인명손실을 포함한 큰 피해가 있었다. 우면산 토석류는 십여 개 지역에서 동시다발적으로 발생하였으며, 토석류 발생 유역 특성과 토석류의 유동특성을 분석하기 위한 현장 조사가 진행되었다. 조사한 자료에 따르면 우면산 일대의 일일 강우량은 서초 기상측정소를 기준으로 최대 24시간 누적 324mm 그리고 시간당 최대 68.5mm/hr를 기록하였다. 상업용 소프트웨어인 FLO-2D는 유사농도의 함수로서 점성(viscous)응력, 항복(yield)응력, 난류 및 분산(dispersive) 응력항을 포함하는 2차 유변학(quadratic rheology) 모델을 기본으로 사용하여 이류(mudflow)와 토석류(debris flow)를 모의할 수 있다. FLO-2D는 흐름의 운동량 및 에너지 보존을 고려하여 격자와 시간에 관계없이 유동심도, 속도, 압력을 예측할 수 있으며, 격자 기반의 모델로서 GIS 및 기타 응용 프로그램들과 연동이 쉽다는 장점이 있다. 그러나 하상침식에 의해 유발된 토석류의 체적 증가는 고려 할 수 없으므로 토석류의 전파 및 퇴적영역에서의 토석류 모의에만 사용할 수 있는 단점이 있다. 이 연구의 목적은 FLO-2D 소프트웨어를 이용하여 우면산에서의 토석류 현상을 재현하는 것이다. 우면산 일대에서 발생한 토석류 중 서초구 방배동의 래미안 아파트 부근에서 발생한 토석류에 대하여 수치지도(DEM)와 현장조사를 통해 얻은 지형자료, 해당 지역의 강우량 및 지질 특성 자료 등을 토대로 FLO-2D 모델을 적용하여 토석류의 흐름특성을 검토한다. 토석류 유동 및 퇴적에 대한 가용한 현장관측 자료와의 비교 분석을 통하여 토석류 특성 값을 산정하고, 모델의 적용성을 검증한다.

• Journal of Service Research and Studies
• /
• v.5 no.1
• /
• pp.91-103
• /
• 2015

We examine the information transmission between the KT Spot and the KT Futures Index, the SK Telecom Spot and the SK Telecom Futures Index, based on the returns data offered by the Korea Exchange. The data includes daily return data from 1 January 2012 to 31 December 2014. Utilizing a dynamic analytical tool-the VAR model, Granger Causality test, Impulse Response Function and Variance Decomposition have been implemented. The results of the analysis are as follows. Firstly, results of Granger Causality test suggests the existence of mutual causality the KT Futures Index and the SK Telecom Futures Index precede and have explanatory power the KT Spot and the SK Telecom Spot However the results also identified a greater causality and explanatory power of the KT Spot and the SK Telecom Spot over the KT Futures Index and the SK Telecom Futures Index. Secondly, the results of impulse response function suggest that the KT Futures Index show immediate response to the KT Spot and are influenced by till time 4. From time 2, the impact gradually disappears. Also the SKT Futures Index show immediate response to the SKT Spot and are influenced by till time 4. From time 2, the impact gradually disappears. Lastly, the variance decomposition analysis shows that the changes of return of the KT Spot and SKT Spot are dependent on those of the KT Futures Index and the SK Telecom Futures Index. This implies that returns on the KT Spot and SKT Spot have a significant influence over returns on the KT Futures Index and the SK Telecom Futures Index. It contributes to the understanding of market price formation function through analysis of detached the KT Spot and the KT Futures Index, the SK Telecom Spot and the SK Telecom Futures Index.