• Journal of the Korean GEO-environmental Society
• /
• v.4 no.2
• /
• pp.15-25
• /
• 2003

Time Domain Refletometry, or TDR, is a remote sensing electrical measurement technique that has been used for many years to determine the spatial location and nature of various objects, especially in the United States of America and Australia at mining industry. Since early on 1990, the TDR techniques have been applied to the geotechnical engineering such as : deformation measurement of rock slope and landslide, monitoring of ground water content and ground water level change, investigation of ground contamination and its movement. The first application of this technique, in 1996, to the domestic area is to determine the possibility of ground settlement caused by subsidence from abandoned underground mines at the Tongri and Gosari in Gangwon-d. In this paper, through the results of analysed deformation data between conventional measurements and the TDR, it was concluded that the TDR technique is a useful instrumentation method for the prediction of ground deformation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.229-237
• /
• 1992

Series system reliability analysis of non-reactive contaminant transport is performed in a two dimensional horizontal domain with two different limit state functions: (1) concentration threshold and (2) exposure time threshold. The transient source transport model is combined with the system reliability model to evaluate the probability that a specified maximum concentration at a node of interest would be exceeded or that a moderate concentration would exceed some exposure limit over a given period of time. The results give probabilities of exceedence greater than probability of each component and they tend to be dominanted by the component with larger probability. Transverse dispersivity turns out to be an important parameter in addition to hydraulic conductivity in a two-dimensional contaminant transport model with transient source. System sensitivity is found to reflect the corresponding sensitivity of both components, with the component with larger probability having a greater influence.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.3 no.1
• /
• pp.51-62
• /
• 2001

In-situ stress measurement using AE (Acoustic Emission) and DRA (Deformation Rate Analysis) is usually carried out under uniaxial loading in the laboratory and it consumes delay time from drilling to testing. Therefore, it should be considered how the lateral stress and delay time influence on the test results for the in-situ stress determination. As the delay time increased, the accuracy of estimating the pre-stress decreased. The pre-stress of the specimen loaded only axially was determined within an error of less than 9% (using AE) and 4% (using DRA). And the specimen on which axial pre-stress and the confining pressure were loaded had an error of less than 17% (using AE) and 14% (using DRA). The results of AE and DRA for field specimens were very similar with each other but smaller than those of hydraulic fracturing method.

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.123-130
• /
• 2007

The purpose of this paper is to capture risk profiles of smaller-sized Korean firms $vis-{\grave{a}}-vis$ larger-sized firms during the Asian financial crisis. For this purpose, risk profiles are provided by estimating expected default risks and by tracking how these have changed during this period with respect to their magnitude, volatility, and sensitivity measures. Methodology used in this study employs the Black-Scholes-Merton model for producing estimates of default risks. And the conventional trans-log function is utilized for obtaining sensitivity measures of the estimated default risks. According to empirical evidence obtained here, it is revealed that contractions of corporate loans associated with IMF austerity policy was the main factor responsible for the drastic change in the default risk profile of Korean firms after occurrence of the Asian financial crisis.

• Journal of Korea Water Resources Association
• /
• v.42 no.5
• /
• pp.415-424
• /
• 2009

Artificial injection of surplus surface water during wet seasons and recovery is one of possible solutions for conjunctive uses of surface water and groundwater. The methodology is especially attractive for regions of monsoon type weather. In this work a simulation-optimization model is developed to identify an optimal injection system to sustain an over-exploiting freshwater pumping well. The injection well is to be operated during wet seasons only while the pumping well is to be operated throughout an entire year. The objective function is the minimization of injected volume of freshwater. Saltwater intrusion and dry wells are considered as constraints. An example application is made on a small hypothetical island with poor hydrogeologic conditions. The optimization model is successful in determining optimal injection locations and rates for various cases.

• Journal of Korea Water Resources Association
• /
• v.34 no.5
• /
• pp.499-509
• /
• 2001

2-D transport model based on a discrete probability distribution for a particle displacement was developed too solve advection-diffusion problems in natural stream. In this proposed model, the probabilities expressed as an average and variance function were used to predict the mass transfer between cells in one time step. The proposed model produces solutions without numerical dispersion for constant velocity, diffusion coefficient, and cross-sectional area. When the stability and positivity restrictions were satisfied, the model produced excellent results compared to analytical solutions and other finite difference methods. The proposed model is tested against the dispersion data collected in the Grand River, Canada. The simulation results show that the proposed model can properly describe the two-dimensional mixing phenomena in the natural stream.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.32-39
• /
• 2009

In this paper, the method of region segmentation using genetic algorithm is proposed for an improvement of efficiency in moving picture coding. A genetic algorithm is the method that searches a large probing space using only a function value for a optimal combination consecutively. By progressing both motion presumption and region segmentation at once, we can assign the motion vector in a image to a small block or a pixel respectively, and transform the capacity of coding and a signal to noise rate into a problem of optimization. That is to say, there is close correlation between region segmentation and motion presumption in motion-compensated prediction coding. This is to optimize the capacity of coding and a S/N ratio. This is to arrange the motion vector in each block of picture according to the state of optimization. Therefore, we examined both the data type of genetic algorithm and the method of data processing to obtain the results of optimal region segmentation in this paper. And we confirmed the validity of a proposed method using the test pictures by means of computer simulation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.4
• /
• pp.519-524
• /
• 2009

Recently, reinforcement learning methods have drawn much interests in the area of machine learning. Dominant approaches in researches for the reinforcement learning include the value-function approach, the policy search approach, and the actor-critic approach, among which pertinent to this paper are algorithms studied for problems with continuous states and continuous actions along the line of the actor-critic strategy. In particular, this paper focuses on presenting a method combining the so-called ACFRL(actor-critic fuzzy reinforcement learning), which is an actor-critic type reinforcement learning based on fuzzy theory, together with the RLS-NAC which is based on the RLS filters and natural actor-critic methods. The presented method is applied to a control problem for crawling robots, and some results are reported from comparison of learning performance.

• Environmental and Resource Economics Review
• /
• v.25 no.4
• /
• pp.517-543
• /
• 2016

This study aims to analyze economic impacts for changes in the oil cost of the anchovy boat seine fisheries in South Korea. As analytical approach, this study employs the exponential surplus production model to estimate the maximum sustainable yield and also utilizes the bioeconomic model to calculate changes in producer surplus of the anchovy boat seine fisheries under the open access responding to changes in the oil cost. As the result of analysis, increases in the oil cost due to prohibition of duty-free oil supply result in the negative impacts to the producer surplus of the anchovy boat seine fisheries in South Korea. However, increases in the oil cost of the anchovy boat seine fisheries lead voluntary exit to fishermen which can no more run their business. As a result, this study shows that fishing efforts of the anchovy boat seine fisheries reduce under the fishing efforts of the maximum sustainable yield ($F_{MSY}$) and stock of the anchovy increases.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.147-154
• /
• 1988

Korea has the ground which freezes in winter and melts in warmer seasons by turns. Therefore, in designing civil-structures or buildings on such ground, the depth of seasonal frost penetratio must be considered. In this paper, approximate contours of the maximum depth of frost penetration in Korea is presented. It was found that the maximum depth of frost penetration did not have the linear relationship to square root of the freezing index. In order to establish more reliable method to estimate the maximum depth of frost penetration, a new empirical equation is introduced. In the presented equation, the dry unit weight and water content of soil are considered in addition to the freezing index. And the equation is compared with other previous equations used so far.