• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.9 no.4
• /
• pp.37-48
• /
• 1999

Current encryption methods have been applied to secure communication using discrete chaotic system whose output is a noise-like signal which differs from the conventional encryption methods that employ algebra and number theory[1-2] We propose an optical encryption method that transforms the primary pattern into the image pattern of discrete chaotic function first a primary pattern is encoded using permutation algorithm, In the proposed system we suggest the permutation algorithm using the output of key steam generator and its security level is analyzed. In this paper we worked out problem of the application about few discrete chaos function through a permutation algorithm and enhanced the security level. Experimental results with image signal demonstrate the proper of the implemented optical encryption system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.112-121
• /
• 2002

In this paper, we present a design of a hash processor for data security systems. Two standard hash algorithms, Sha-1(American) and HAS-1600(Korean), are implemented on a single hash engine to support real time processing of the algorithms. The hash processor can also be used as a PRNG(Pseudo-random number generator) by utilizing SHA-1 hash iterations, which is being used in the Intel software library. Because both SHA-1 and HAS-160 have the same step operation, we could reduce hardware complexity by sharing the computation unit. Due to precomputation of message variables and two-stage pipelined structure, the critical path of the processor was shortened and overall performance was increased. We estimate performance of the hash processor about 624 Mbps for SHA-1 and HAS-160, and 195 Mbps for pseudo-random number generation, both at 100 MHz clock, based on Samsung 0.5um CMOS standard cell library. To our knowledge, this gives the best performance for processing the hash algorithms.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.125-135
• /
• 1993

The safe and efficient operation of nuclear plants is recognized to be accomplished through the application of plant automation using digital technology, which is one of main targets of the next generation nuclear plants. For plant level automation, it is first required that each major subsystem be digitalized, and the steam generator water level control system is discussed in this study. The transfer functions between inputs and the level are derived by employing the thermal hydraulic model of the steam generator and are applied to the analysis of the current three-element control system. Since the control scheme in this study includes the steam generator itself as a process plant, the system order is high and the numerical instability arises in digitalizing. Together with this, the unreliability of the feedwater feedback signal at low power level leads to the proposal of a two-element control system with a proper digital controller. The digital PI controller developed for this system has the initial power adaptive gain and integration time constant. And it makes the overall system response satisfy the stability and other necessary control specifications simultaneously. Since the two-element control system using this controller depends on the initial power only, it is simple to define and it shows a similar level response behavior to that of its corresponding analog system.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.3 s.73
• /
• pp.239-245
• /
• 2006

In this paper, the performance of a toggle brace-MR damper system is evaluated for the control of the structure excited by earthquake load and the non-linearity of the toggle system is investigated. Considering that the control force of MR damper described by Bingham model is a function of velocity, velocity amplification factor by the toggle brace system is calculated and the effect of toggle configuration on the amplification factor is also evaluated. Numerical results show that the control performance can be largely enhanced using toggle brace system especially for the case that the MR damper installed with conventional brace system such as Chevron and diagonal cannot provide enough control force under severe earthquake load.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.261-266
• /
• 1995

본 연구에서는 자기부상시스템에 대해 흡인식 자기부상방식을 채택하고 쇠구슬에 대한 운동을 상하 1자유도로 가정하여 운동방정식을 세운다. 이때 전자석이 자기 부상력은 전자석에 흐르는 전류와 인덕턴스의 함수라 가정하고, 모델의 불확실성은 자기부상계의 운동 방정식으로부터 선형화 할 때 발생하는 오차 및 파라미터 변동으로 생각한다. 또한 모델의 불확실성이 존재하더라도 정상편차 없이 부상하는 서보제어계를 설계한다. 그런데 저자등은 강인성 문제 및 정상편차 없는 것에 역점을 두어 H$_{\infty}$ 제어이론에 기초한 1형 로바스트 서보 제어기를 구하여 자기부상 시스템의 안정화 제어계로써 적용한 적이 있다. 이때 중심해 이외의 해를 이용하여 설계한 서보 제어계는 자기부상계의 과도상태시에 일어나는 오버슈트를 줄일 수 없었다. 따라서 시스템 내부 안정화를 위하여 H$_{\infty}$ 제어이론에 의해 설계된 피드백(feedback) 제어기와 물체가 부상할 때 오버슈트를 줄이고 제어량이 목표치에 잘 추종하기 위해 설계된 피드 포워드(feed forward) 제어기로써 2자유도를 갖는 제어계를 설계한다. 이렇게 설계한 2자유도 제어계를 가지고 모의 응답실험과 본 연구자들이 만든 자기부상 시스템의 실험결과를 비교함으로써 설계된 제어기의 타당성을 조사한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.159-164
• /
• 2010

This paper focuses on the stability analysis and stabilization for networked control system with neutral type of time-delay. By utilizing the delay partitioning idea, new stability criteria are proposed in terms of linear matrix inequalities(LMIs). These conditions are developed based on the Lyapunov-Krasovskii functionals. Based on the derived criteria, a sufficient condition for te solvability of this problem is obtained in terms of linear matrix inequality without decomposing the original system matrices. Also, it is shown that the proposed controller design method is general for networked control systems. Finally, illustrative examples are presented to show the applicability of the proposed method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.3
• /
• pp.298-303
• /
• 2004

This paper deals with a stochastic stabilization of observer-based output-feedback control Takagi-Sugeno (T-S) fuzzy system with Markovian input delay. The finite Markovian process is adopted to model the input delay of the overall control system. It is assumed that the zero and hold devices are used for control input. The continuous-time T-S fuzzy system with the Markovian input delay is discretized for easy handling delay, accordingly, the discretized T-S fuzzy system is represented by a discrete-time T-S fuzzy system with jumping parameters. The stochastic stabilizability of the jump T-S fuzzy system is derived and formulated in terms of linear matrix inequalities (LMIs). The usefulness of the proposed algorithm is also certificated by simulation of 2 degree of freedom helicopter model.

• Membrane Journal
• /
• v.14 no.2
• /
• pp.142-148
• /
• 2004

This paper presents the enhancement of oxygen transfer efficiency using vibrating intravascular lung assist device (VIVLAD) for patients having chronic respiratory problems. The flow rate was controlled by the pump and monitored by a built-in flow meter. The vibration apparatus was composed of a piezo-actuator, a function generator, and a power amplifier. Gas flow rates of up to 6 L/min through the 120-cm-long hollow fibers have been achieved by exciting a piezo-actuator. The output PVDF sensor and FRF (frequency response function) were investigated by various frequency in VIVLAD. As a result, the maximum oxygen transfer rate was found to occur with maximum amplitude and the transfer of vibration to the hollow fiber membranes. It was excited by the frequency band of 35 Hz at various distilled water flow rates, and various module types.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.554-554
• /
• 2013

대기압 제트 플라즈마를 저주파(수-수십 kHz) 전압에서 구동 시, 일반적으로 '스트리머(streamer)'혹은 '플라즈마 총알(plasma bullet)'로 불리는 현상이 특정 운전조건에서 관찰된다. 본 연구에서는 동일 구조의 Ta, Ti, stainless steel, brass, Cu, Ni 전극을 이용하여 전극물질에 따른 대기압 제트 플라즈마의 특성 변화를 분석하였다. 각각의 물질은 서로 다른 이차전자방출계수, 일함수, 전기전도도 등 고유한 성질이 다르기 때문에 이들 전극을 이용하여 발생시킨 제트 플라즈마 역시 다른 특성을 갖는다. Acton SpectroPro750 분광기를 이용하여 얻은 플라즈마 방출광스펙트럼으로부터 구한 전자 여기온도(Texc=680~720 K)와 OH의 분자 회전온도(Trot=350~380K)는 물질에 따라 큰 변화를 보이지 않았으나, 발생된 스트리머 거동에서 큰 차이를 확인하였다. ICCD 카메라를 이용한 시간 분해된 이미지에서 전극물질에 따른 첫 번째 스트리머의 발생시간 및 스트리머 속력, 두 번째 스트리머의 분리시간이 모두 다른 것을 확인하였다. 제일 차이가 심하게 나타나는 Ti과 Cu의 경우 첫 스트리머의 발생시간 차이는 약 $1{\mu}s$이며, 평균속력 및 순간속력이 약 2 km/s 차이가 났다. 이 결과를 통해 물질의 이차전자방출계수 및 일함수가 대기압 제트 플라즈마에서 스트리머 발생에 영향을 주는 것을 알았고, 다른 전극물질을 사용한 제트 플라즈마의 특성이 다름에 따라 여러 응용에서의 결과에도 영향을 미칠 것이라생각한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4C
• /
• pp.413-423
• /
• 2003

The CMA algorithmis most widely investigated blind algorithm and the most widely used one in practice. But, since nonlinear CM cost function have not closed form solution about the optimum weight. There have been difficultiesto analyze the CMA equalizer's theoretical performance. Recently, Zeng presents the notable theoretical resultabout the MSE of CM-minimizing estimators for the FIR linear channel in the presence of AWGN. Through this method, It wouldbe possible to campare the theoretical performance between CMA and Wiener equalizer in terms of MSE. In this paper, based on Zeng's method, we first calculate the theoretical MSE bound of CMA equalizer in partial response channel which is widely used in HDD, digital VCR such as high-density digital recording.playback systems. We confirmedthis result withthe computer simulation. Except this, we also performedthe theoretical and simulation analysis about the modified CMA equalizer, which was proposed to improve the performance of CMA equalizer in partial response channel. Finally, we compare and evaluate the performance analysis results between CMA and Modified CMA equalizer.