• 한국정보통신학회논문지
• /
• 제12권12호
• /
• pp.2265-2270
• /
• 2008

최근 대두 되고 있는 지구 온난화 및 기후 변화와 관련해서 수온이 해양 생태계에 미치는 영향을 알기 위하여 한반도 주변 해역을 중심으로 $1988{\sim}2000$년까지 NOAA SST자료를 활용하여 어류 회류의 변동성에 대하여 조사하였다. 위성자료를 분석해 본 결과 우리나라는 전반적으로 온난화 경향이 나타나고 있다. 연근해의 수온상승과 비교해 볼 때, 오징어, 멸치, 정어리, 꽁치 등 회유성 어종의 분포해역이 점차 북상하고 있는 것으로 나타났다. 또한 난류성 어종인 오징어와 멸치의 어획량은 증가한 반면, 한류성 어종인 꽁치와 정어리는 감소하는 경향을 보였다. 그러나 어황에 영향을 미치는 요인에는 수온뿐만 아니라 염분 및 오염도 등 여러 가지 요소가 존재하기 때문에 수온상승으로 인해 생기는 어황의 변화라고 단정 짓기는 어렵다. 따라서 금후 기후 변동과 연근해 어황 변화에 대해서도 계속적인 연구가 필요하다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권1호
• /
• pp.24-27
• /
• 2008

For the development of superconducting fault current limiters(SFCLs) having large current capacity, we fabricated an SFCL element that consists of Bi-2212 superconductor and Cu-Ni alloy tubes. First, Ag was plated on the surface of the Bi-2212 for the enhancement of soldering process. On the Ag-plated Bi-2212 tube, a Cu-Ni alloy tube was soldered using optimized solders and soldering conditions. The BSCCO/Cu-Ni composite was processed mechanically to have a helical shape for the improvement of the SFCL characteristics. The total current path of the SFCL element was 1330 mm long with 12 turns, and had critical current of 340 A at 77 K. Finally, we carried out the fault test using the fabricated SFCL element. It showed successful current limiting performance under the fault condition of 50 $V_{rms}$ and 5.5 kA. From the results, the rated voltage of the SFCL element was decided to be 0.4 V/cm, and the power capacity was 12 kVA at 77 K. The fabrication process of the SFCL and the fault test results will be presented.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권1호
• /
• pp.42-47
• /
• 2008

In this paper, the fault current limiting characteristics for the superconducting fault current limiter(SFCL) using magnetic coupling between two coils were investigated. The SFCL consists of a high-$T_c$ superconducting(HTSC) element and two coils. This SFCL has different characteristics that depend on the connection form, the winding direction and the inductance ratio of two coils. The impedance and the operational current of the SFCL can be adjusted higher or lower than the resistance and the critical current of HTSC element. Therefore, the SFCL can change the amplitude of the limited fault current. To confirm it, the HTSC element was modeled and the fault current limiting characteristics of the SFCL were analysed through computer simulation. It was obtained from the analysis that the connection form and the winding direction of two coils of the SFCL were the important design parameters.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.37-42
• /
• 2007

We are developing a 22.9 kV/25 MVA superconducting fault current limiting(SFCL) system for a power distribution network. A Bi-2212 bulk SFCL element, which has the merits of large current capacity and high allowable electric field during fault of the power network, was selected as a candidate for our SFCL system. In this work, we experimentally investigated important characteristics of the 190 kVA Bi-2212 SFCL element in its application to the power grid e.g. DC voltage-current characteristic, AC loss, current limiting characteristic during fault, and so on. Some experimental data related to thermal and electromagnetic behaviors were also compared with the calculated ones based on numerical method. The results show that the total AC loss at rated current of the 22.9 kV/25 MVA SFCL system, consisting of one hundred thirty five 190 kVA SFCL elements, becomes likely 763 W, which is excessively large for commercialization. Numerically calculated temperature of the SFCL element in some sections is in good agreement with the measured one during fault. Local temperature distribution in the190 kVA SFCL element is greatly influenced by non-uniform critical current along the Bi-2212 bulk SFCL element, even if its non-uniformity becomes a few percentages.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권3호
• /
• pp.46-51
• /
• 2007

The 22.9kV/630A superconducting fault current limiter (SFCL) is developed by the KEPRI-LSIS collaboration group. This resistive SFCL uses three pairs of conduction-cooled current leads. When the SFCL system is in the fault mode. the current flows 20 times more than the steady state. Therefore. it is important that the current lead is designed to have the thermal stability in order to minimize the heat input of the cold-end. This paper presents the design and performance results of a pair of conduction-cooled brass current leads considering both cases that the SFCL system operates at the steady state and the fault current.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권3호
• /
• pp.26-31
• /
• 2007

In recent years. YBCO coated conductor (CC) called as second generation HTS (high temperature superconducting) wire has been developed as a suitable material for resistive superconducting fault current limiter (SFCL). For designing the SFCL. the required length of superconducting wire is inverse proportional to the maximum temperature reached when a fault occurs. Since the required length strongly affects a manufacturing cost, it is the most important parameter to determine the maximum temperature reached. It is necessary to observe the repetitive over-current characteristics of HTS wire. This paper attempts to measure the variation of critical current of YBCO CC after repetitive over-current pulse. No degradation of the critical current of CC sample was observed by applying 100 times over-current pulse which makes temperature above 400 K after 100ms. This study can be useful in designing optimally resistive SFCL employing YBCO CC. The maximum permissible temperature can be set to 400K. so wire length could be reduced by 30% compared in case of 300K-criterion.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권3호
• /
• pp.21-25
• /
• 2007

Superconducting fault current limiter (SFCL) is attractive apparatus to reduce fault current in power grid. Since it is applied to the alternating current (AC) power line, the SFCL has losses in the normal operation. Recently, coated conductor (CC) is noticeable material employed for resistive bifilar winding type SFCL in many research groups. Bifilar structure is expected to have low AC loss by magnetic field offset as compared with the single tape structure in the same length. This paper reports about characteristic of bifilar pancake type coil for SFCL application in AC loss aspect. The bifilar coil is wound using CC with facing on HTS sides each other. Transport AC loss measurement and characteristic analysis of the bifilar coil using CC have been performed at 77K. The test results are compared with the Norris equations and the test results of non-inductively wound paralleled solenoid type coil which is suggested and tested in this group at present.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권1호
• /
• pp.25-29
• /
• 2009

To reduce the power loss in normal state, non-inductively wound high temperature superconducting (HTS) coils are used for fault current limiter (FCL) application. Non-inductively wound coils can be classified into two types: solenoid type and pancake type. These two types have different electrical and thermal and mechanical characteristics due to their winding structure difference. This paper deals with the current limiting characteristics, magnetic field analysis of the two coils. Simulation using finite element method (FEM) was used to analyze the magnetic field distribution and inductance of the coils. Short circuit test using stabilizer-free coated conductor (CC) was also carried out. We can compare the characteristics of the two types of coil by using the data obtained from simulation and short circuit test. We confirmed the feasibility of FCL application by the analysis about the characteristics of non-inductively wound coil using CC.

• 한국전기전자재료학회논문지
• /
• 제36권6호
• /
• pp.614-619
• /
• 2023

The fault current limiting characteristics of three-phase transformer type superconducting fault current limiter (SFCL), which consisted of three-phase primary and secondary windings wound on E-I iron core, one high-TC superconducting (HTSC) element connected with the secondary winding of one phase and another HTSC element connected in parallel with other two secondary windings of two phases, were analyzed. Unlike other three-phase transformer type SFCLs with three HTSC elements, three-phase transformer type SFCL using double quench has the merit to perform fault current limiting operation for three-phase ground faults with two HTSC elements. To verify its proper three-phase ground fault current limiting operation, three-phase ground faults such as single-line ground, double-line ground and triple-line ground faults were generated in three-phase simulated power system installed with three-phase transformer type SFCL using double quench. From analysis of its fault current limiting characteristics based on tested results, three-phase transformer type SFCL using double quench was shown to be effectively operated for all three-phase ground faults.

• 한국콘텐츠학회논문지
• /
• 제10권9호
• /
• pp.146-154
• /
• 2010

국내 방송 콘텐츠 유통 시장은 1995년 케이블 TV의 등장과 함께 처음으로 형성되기 시작하여 2000년대 들어 한류 영향으로 인한 해외 시장 확대와 함께 급격한 성장을 이루었다. 또한, 최근 들어 IPTV 등을 비롯한 새로운 플랫폼의 등장과 함께 또 다른 도약을 준비해야하는 중요한 시점에 와있다. 이에 따라 본 연구에서는 국내 방송 콘텐츠 시장의 현주소를 보다 종합적으로 살펴보고 그 개선 방안을 논의해 보고자 하였다. 먼저, 국내 방송 콘텐츠의 유통 시장 현황을 살펴본 결과, 여전히 지상파 방송사의 지배적 구조가 두드러지게 나타나고 있었다. 특히, 외주 제작 정책으로 지상파 방송의 외주제작비율이 지속적으로 증가하고 있는 가운데, 방송사와 제작사 간의 거래에 있어서는 불공정 거래나 저작권 귀속 문제로 갈등을 빚고 있는 것으로 나타났다. 또한, 영상물의 해외 유통을 전문적으로 담당하는 독립유통 에이전시는 소수에 그치고 있으며 국내에서의 입지도 크지 않다는 것을 알 수 있다. 한편, 방송 영상물의 해외 수출은 지난 2000년 이후 한류 현상과 함께 급격히 상승하였는데, 아시아 지역에 대단히 편중되어 있으며, 장르 분야도 드라마에 치우쳐 수출 지역과 장르의 제한이라는 문제점을 가지고 있는 것으로 나타났다. 이에 따라 향후 유통 시장의 균형을 찾을 수 있는 합리적인 개선 방안을 도출해내는 작업이 무엇보다 필요할 것으로 여겨진다.