Progress in Superconductivity and Cryogenics (한국초전도ㆍ저온공학회논문지)

The Korean Society of Superconductivity and Cryogenics (한국초전도저온학회)
권호 표지
DOI QR코드

DOI QR Code

Repetitive Over-current Characteristics of YBCO Coated Conductor for Applying to SFCL

초전도한류기에 적용하는 YBCO 박막형 선재의 반복적 과전류 특성

  • Published : 2007.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

In recent years. YBCO coated conductor (CC) called as second generation HTS (high temperature superconducting) wire has been developed as a suitable material for resistive superconducting fault current limiter (SFCL). For designing the SFCL. the required length of superconducting wire is inverse proportional to the maximum temperature reached when a fault occurs. Since the required length strongly affects a manufacturing cost, it is the most important parameter to determine the maximum temperature reached. It is necessary to observe the repetitive over-current characteristics of HTS wire. This paper attempts to measure the variation of critical current of YBCO CC after repetitive over-current pulse. No degradation of the critical current of CC sample was observed by applying 100 times over-current pulse which makes temperature above 400 K after 100ms. This study can be useful in designing optimally resistive SFCL employing YBCO CC. The maximum permissible temperature can be set to 400K. so wire length could be reduced by 30% compared in case of 300K-criterion.

Keywords

References

  1. E. Leung, 'Super conducting fault current limiters,' IEEE Power Engineering Review, vol. 20, no. 8, pp. 15-18, 2000
  2. R. Kreutz, J. Bock. F. Breuer, K-P. Juengst, M. Kleimaier, H.-U. Klein, D. Krischel, M. Noe, R. Steingass, K-H. Week, 'System technology and test of CURL 10, a 10 kV, 10 MVA resistive high-To superconducting fault current limiter,' IEEE Transactions on Applied Superconductivity, vol. 15, no. 2, pp. 1961-1964, 2005 https://doi.org/10.1109/TASC.2005.849345
  3. Y.-S. Jo, K.-S. Ryu , M. Park, '1 st Phase Results and Future Plan of DAPAS Program,' IEEE Transactions on Applied Superconductivity, vol. 16, no. 2, pp. 678-682, 2006 https://doi.org/10.1109/TASC.2006.869990
  4. 안민철, '전력계통 안정화를 위한 사고전류제한기용 초전도마그네트에 관한 연구,' 연세대학교 박사 학위 논문, 2006
  5. M. C. Ahn, S. E. Yang, D. K. Park, H. Kang, B.-Y. Seok, T. K. Ko, 'Current limiting characteristics of coated conductors with various stabilizers,' ACASC 2005 conference, 2005
  6. D. K. Park, M. C. Ahn, S. Park, H. Kang, D. K. Bae, S. E. Yang, B.-Y. Seok, T. K. Ko, 'Development of 220 V /300 A Class Non-inductive Winding Type Fault Current Limiter Using 2G HTS Wire,' ASC2006 conference, 2006
  7. O.-B. Hyun, S.-D. Cha, H.-R. Kim, H.-S. Choi, S.-D. Hwang, 'Shunt-assisted simultaneous quenches in series-connected resistive SFCL components,' IEEE Transactions on Applied Superconductivity, vol. 13, no. 2, pp. 2060-2063, 2003 https://doi.org/10.1109/TASC.2003.812986
  8. H.-S. Choi, H.-R. Kim, O.-B. Hyun. S.-J. Kim, 'Quench properties of Y-Ba-Cu-O films after overpowering quenches,' IEEE Transactions on Applied Superconductivity, vol. 11, no. 1, pp. 2418-2421, 2001 https://doi.org/10.1109/77.920350
  9. C. Lee, K. Nam, H. Kang, M. C. Ahn, T. K. Ko, B.-Y. Seok, 'Design of High Temperature Superconducting Coil for 8.3 MVA Fault Current Limiter,' ASC2006 conference, 2006
  10. 이찬주, 남관우, 강형구, 고태국, 석복렬, 'YBCO Coated Conductor의 과전류 특성해석.' 대한전기학회 하계학술대회논문집, pp. 693-694, 2006