• Journal of Soil and Groundwater Environment
• /
• v.27 no.3
• /
• pp.22-40
• /
• 2022

The goal of this study was to estimate the possible scattering distance of deicer from the highway and the impact range of deicer on soil quality in terms of plant growth. Among the major elements (Ca²⁺, Cl^- and Na⁺) of deicer, Ca²⁺and Cl^- are usually applied as fertilizer to soil. Therefore both elements (Ca²⁺and Cl^-) were not appropriate for a tracer of deicer at the agricultural area. In this study, SAR (sodium adsorption ratio) of soil was proposed as an alternative tracer to confirm the distribution of the deicer around the highway areas. Because deicer is the main anthropogenic source of Na⁺ around the highway areas and does harm to the physical properties of soil and plant growth through the destruction of soil aggregate, SAR would be an recommendable tracer to access the distribution of deicer as well as adverse effect on soil quality at highway areas. The influence range of deicer based on SAR of soil was estimated to be less than 20 m distance from the highway even though the possible flying distance of deicer was found to be more than 100 m from the highway. However the deicer seriously deposited within 10 m from the highway.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.523-530
• /
• 2022

The problem in the construction of seawall reinforcing the seawall where there is seawater flow is the outflow of materials. Gravity-type pouring of concrete is difficult to fill the voids smoothly, and the cement of concrete that has not hardened is likely to be dispersed in seawater. This phenomenon not only reduces the reliability of quality after concrete hardening, but can also adversely affect the surrounding environment. Therefore, there is a need for a gel-like injection material that can be injected, In this study, the initial strength and durability improvement effect of seawater immersion were evaluated by using electrofurnace reduction slag and blast furnace slag with acute properties. As a result of the experiment, it was possible to prepare a gel-like injection material having flowability through reaction with silica-based chemical liquid. The flowability of the gel is 105~143 mm depending on the formulation, and the on-site simulation test can fill the voids without external leakage, confirming its on-site applicability.

• Environmental and Resource Economics Review
• /
• v.33 no.1
• /
• pp.59-86
• /
• 2024

Recently, research on city gas demand is increasing by reflecting the characteristics of each region. The similarity of the social structure of the adjacent region and the density of the supply infrastructure induce spatial correlation with the clustering that has a microscopic relationship between regions. Accordingly, as a result of analyzing the spatial correlation after dividing the demand for city gas for civilian use into a total of 54 regions based on the jurisdiction of 34 city gas companies, it was confirmed that there was a positive spatial correlation from a global and local perspective. In this study, the demand for city gas for civilian use for 54 regions from January 2014 to December 2022 was composed of panel data, and the spatial panel regression analysis and the general panel regression analysis were compared, and it was found that the spatial error model (SEM) was the most suitable model. This presents policy and practical implications by confirming that the demand for city gas for civilian use in one region has a significant relationship with the adjacent region.

• Geotechnical Engineering
• /
• v.14 no.4
• /
• pp.91-102
• /
• 1998

Electrical resistivity method, one of the most widely used geophysical prospecting methods. has been usually applied to explorations for groundwater and underground resources. However, it has been extending its scope to civil & environmental engineering areas since it twas been developed so as to image underground structures effectively. A FEM algorithm for the dipole-dipole array was developed to correct topographic effects which have a serious influence on electrical methods. Applicability of the electrical resistivity imaging technique to civil & environmental engineering areas was verified through three case histories in this study First, thickness of soil layers was profiled to judge the possibility of developing borrow-pits tn an industrial complect site. Second, weak zones such as fractures and coal seams were detected to provide geological information for design and construction in a high mountain tunnel site. Third, horizontal/vertical distribution of the contaminated zone and depth of waste disposal were delineated in a completed industrial waste disposal site.

• Resources Recycling
• /
• v.33 no.1
• /
• pp.37-47
• /
• 2024

In grouting, the LW method is commonly employed to induce the gelation of cementitious material using water glass, thereby restricting the extent of material injection. Nevertheless, challenges manifest when materials are lost before gelation, particularly in regions with high groundwater flow rates or significant subsurface voids. This study developed a thixotropic grout material using LFS and GGBFS to mitigate material loss during injection, with an assessment of its flow characteristics, durability in marine exposure, strength, and injection properties. The outcomes revealed that the thixotropic grout material exhibited flow ranging from 105 to 143 mm and enhanced strength and durability compared to the LW method. Furthermore, field tests substantiated that applying vibration and impact improved impermeability.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.3
• /
• pp.133-139
• /
• 1999

The geostatistical method Kriging is used to estimate the areal distributions of the depth to the water table and the altitude of the water table measured from the sea level. A northern part of the city of Pohang, Kyeong-Buk, Korea has been chosen and the digital map of the area with 1:5,000 scale from the National Geographic Information System (NGIS) project by National Geographic Institute has bun used to reproduce the ground surface distribution. The water table depth appears to be in the range between 7 m and 9.5 m except a few localities where mountain tops exist and the use of groundwater for agicultural purposes is believed to be heavy. The overall distribution of the water table altitude shows a monotonic gradual decrease from the west to the east (seaward direction from the inland) and to the south with maximum rate approximately at 90 m over 6 km in horizontal distance and indicates that the groundwater is moving several meters per day there.

• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.445-471
• /
• 2023

Long-term safety over millennia is the top priority consideration in the construction of disposal sites. However, ensuring the mechanical stability of deep geological repositories for spent fuel, a.k.a. radwaste, disposal during construction and operation is also crucial for safe operation of the repository. Imposing restrictions or limitations on tunnel support and lining materials such as shotcrete, concrete, grouting, which might compromise the sealing performance of backfill and buffer materials which are essential elements for the long-term safety of disposal sites, presents a highly challenging task for rock engineers and tunnelling experts. In this study, as part of an extensive exploration to aid in the proper selection of disposal sites, the anticipation of constructing a deep geological repository at a depth of 500 meters in an unknown state has been carried out. Through a review of 2D and 3D numerical analyses, the study aimed to explore the range of properties that ensure stability. Preliminary findings identified the potential range of rock properties that secure the stability of central and disposal tunnels, while the stability of the vertical tunnel network was confirmed through 3D analysis, outlining fundamental rock conditions necessary for the construction of disposal sites.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.96-106
• /
• 2021

The PC structure based on the OSC (Off-Site Construction) is mentioned as a representative method of innovation in the construction industry that converts the existing construction environment from site-centered to factory production-transportation-site assembly. However, recent research on PC method has focused on improving the functions of subsidiary materials and improving the production system to increase productivity and institutional / policy R&D that can be universally applied to the life-cycle stage of ordering / design /construction is insufficient. In particular, the absence of standardized cost calculation standards makes it difficult to calculate and verify of objectified appropriate construction cost. So which is an obstacle to the activation of the PC method. In this study, the standards for construction costs of domestic and foreign PC method were surveyed and similar Construction Standard Production Rates were analyzed to confirm the product structure suitable for PC method. Subsequently, the construction procedures and input resources for each PC subsidiary materials were identified through on-site surveys to derive component for subsidiary materials, and the factors of change in the product according to the construction characteristics(height, weight of subsidiary material) were verified. As a result the standard product calculation system suitable for the site installation of the PC method for apartment was presented.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.6
• /
• pp.46-54
• /
• 2018

In the 21st century, the Earth has continued its efforts to reduce carbon emissions to overcome the crisis caused by climate change. The construction industry, which is a representative industry that produces large amounts of the environmental load during construction, should actively reduce the amount of the environmental load. From the planning stage of the construction facility, it is necessary to consider the environmental load such as route selection and structure type selection to reduce the environmental load. However, the environmental load can be estimated based on the input resource amount. However, in the planning stage, it is difficult to accurately calculate the environmental load due to lack of information on the construction amount. The purpose of this study is to select the environmental load factors for IPC girder bridges to be used in the environmental load estimation model in the planning stage. Specific information related to the environmental load was selected from a list of information available in the planning stage, reflecting the Life Cycle Assessment(LCA), correlation, principal components analysis and expert opinion. The list of selected planning stage information is 10 such as span length and bridge extension, and it is expected to be used as a basic data for the future development of environmental load estimation model.

• Journal of Environmental Impact Assessment
• /
• v.30 no.5
• /
• pp.328-338
• /
• 2021

EIA consultation is a final decision-making process that enables a variety of stakeholders to participate in and to share important information about the expected environmental impacts caused by development projects. However, this process is often undermined through re-consultation processes by significant changes in the proposed plans. EIA re-consultation is a necessary process when an approved plan needs to be changed for a variety of importantreasons including the changes of land use, delay of construction, and surrounding environments. EIA re-consultation is also important to resolve conflicts among stakeholders and to respond flexibly to unexpected changes in surrounding environment. This study aims to analyze the operation status and the problems of current institutional systems of EIA re-consultation, and to draw implications by reviewing institutional systems of other countries such as U.S. EU, Scotland, and Japan. On the basis of the previous analysis, we propose recommendations to improve the existing EIA re-consultation process. We expect this study helps understand operation status and problems of EIA re-consultation, and provides meaningful implications to improve the existing institutional systems and practice of re-consultation.