• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.10
• /
• pp.895-903
• /
• 2016

Spaceborne imaging sensors require periodic calibrations using an on-board calibration device for an image quality of observation satellites. The on-board calibration device consists of a blackbody to provide uniform radiance temperatures and calibration mechanism with a function of stow and deploy to target the blackbody during the calibration. Among these devices, the calibration mechanism is required to implement a fail-safe function to prevent blocking of the main optical path when the mechanism stops at a certain position during on-orbit calibration. In addition, structural safety of the mechanical driving part of the mechanism within the launch environment must be guaranteed. In this study, we proposed a deploy/stow-type calibration mechanism that provides launch-lock and fail-safe function. The effectiveness of the functionality of the proposed mechanism was validated through functional test using engineering model.

• Journal of Internet Computing and Services
• /
• v.23 no.3
• /
• pp.47-56
• /
• 2022

The safe driving reward system aims to reduce the loss of life and property by reducing the occurrence of accidents by motivating safe driving and encouraging active participation by providing direct reward to vehicle drivers who have performed safe driving. In the case of the existing digital tachograph, the goal is to limit dangerous driving by recording the driving status of the vehicle whereas the safe driving reward system is a support measure to increase the effect of accident prevention and induces safe driving with financial reward when safe driving is performed. In other words, in an area where accidents due to speeding are high, direct reward is provided to motivate safe driving to prevent traffic accidents when safe driving instructions such as speed compliance, maintaining distance between vehicles, and driving in designated lanes are performed. Since these safe operation data and reward histories must be managed transparently and safely, the reward evidences and histories were constructed using the closed blockchain Hyperledger Fabric. However, while transparency and safety are guaranteed in the blockchain system, low data processing speed is a problem. In this study, the sequential block generation speed was as low as 10 TPS(transaction per second), and as a result of applying the acceleration function a high-performance network of 1,000 TPS or more was implemented.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.200-201
• /
• 2023

Digital twin technology is used in various fields as a method of creating a virtual world to minimize the cost of solving problems in the real world, and is also actively used in the maritime field, such as large-scale systems such as ships and offshore plants. In this paper, we tried to build a digital twin of coastal waters using a ship-handling simulator. The digital twin of the coastal waters developed in this way can be used to safely manage Korea's coastal waters, where maritime traffic is complicated, by providing a actual maritime traffic data. It can be usefully used to develop and advance technologies related to maritime autonomous surface ships and intelligent maritime traffic information services in coastal waters. In addition, it can be used as a 3D-based monitoring equipment for areas where physical monitoring is difficult but real-time maritime traffic monitoring is necessary, and can provide functions to safely manage maritime traffic situations such as aerial views of ports/control areas, bridge views/blind sector views of ships in operation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.133-133
• /
• 2003

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5A
• /
• pp.389-396
• /
• 2005

In this paper, we design AVTMRWFSV(All Voting Triple Modular Redundancy With Fail-Safe Voter) System with a fail-safe output voter architecture and analyze RAMS(Reliability, Availability, Maintainability, Safety) as system failure rate. This system is compared with AVTMR system for RAMS(Reliability, Availability, Maintainability, Safety) with Markov modeling, and we can see that the system safety of AVTMRWFSV is more profitable than that of AVTMR. The dependability of AVTMRWFSV system is higher than that of AVTMR. Especially, safety is very profitable. So, this kind of system can be applied to embedded communication system and life critical systems - railway, airplane, ship, nuclear control system and so on.

• Journal of the Korean Institute of Gas
• /
• v.1 no.1
• /
• pp.1-6
• /
• 1997

In case of using the electrical apparatus in the hazardous atmosphere which exist flammable gas mixtures, There is a dangerosity of gas explosion accident by the electrical spark. The most general method to prevent the explosion by the spark is to use the flame-proof type electrical apparatus to isolate the ignition source. from the flammable atmosphere. But actualy it is impossible to isolate the ignition sources from the atmosphere. So it was needed to find the safe gap which prevent ignition of flammable atmosphere by transmission of flame or heat when a flammable gas mixture exploded inside the apparatus. In this study we tried to find the maximum experimental safe gap(MESG) of $H_2$-air, and $CH_4$-air mixtures by using the 8 litre spherical vessel with 25mm flange. The experiment parameter were ignition position, concentration and initial pressure before explosion. From the experiment the ignition position was affected to the MESG. MESG value was minimum near the stoichiometric concentration of gas mixtures, and according to the increase of initial pressure MESG was decreased.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.5
• /
• pp.478-495
• /
• 2016

The existing city planning was performed by internal few decision-maker, but the information that an individual could contact with through the evolution of the ICT technology increased in the smart city, and a channel diversified and came to be able to participate in a decision making process by various methods. I show that it is in the collaborative planning process to come to a mutual understanding with residents directly or indirectly if utilize big data in a process of the safe community planning of the smart city. Therefore, I compare the utilization contents between data of Matsubara-shi,Japan and data of certification city of Korea which received the certification of the WHO international safe community. In the area where this study prepares for the approval of the international safe community, it wants you to use it though you utilize the data as the supporting role of the residents participation plan.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.428-430
• /
• 2018

Accidents of commuting vehicles for kindergarteners and nursery school students continue to occur despite various safety policies from the government. In order to minimize such accidents, it is necessary to use both the vehicle-mounted safety commutation management software which can be easily operated by the driver, and the mobile app to manage the safe schooling of the children that can inform such information to parents timely. In this paper, we describe the design and implementation of the safety management software architecture.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.927-933
• /
• 2014

Ship Power Management System(SPMS) based on Communication Network(CN) is one of the most significant factor for a safe voyage. Therefore, most of the vessels are using greater capacity generator than necessary to prevent pulsating load for safety purposes. However, It provokes low-load damage and reduces generator efficiency that using large capacity generator. Accordingly, in this paper propose hybrid power system for prevent damage of pulse load. Simulation using NI's LabVIEW was conducted for the design of the power system based on actual navigation data of the ship. Also, propose applying methods for hybrid power system in connection with the auxiliary power system for safe navigation.

• Journal of the Korea Convergence Society
• /
• v.6 no.3
• /
• pp.13-18
• /
• 2015

This paper is the study on the safe design of joint controling the pressure and temperature by connecting between pipes laying with the flexible joint. This study aims at decreasing the excessive pressure applied in the pipe and preventing the accident occurrence in order to solve the pipe damage by extraction and contraction due to the pressure of open air and transport gas. The flow properties of each model are investigated through the simulation analysis by applying three kinds of the flexible joints. When transport gas passes the flexible joint, the flow characteristics of heat, pressure and velocity at pipe laying are analyzed. It is thought to be contributed to the safe design due to the shape of the flexible joint by using the result of this study. And it is possible to be grafted onto the convergence technique at design and show the esthetic sense.