• Journal of Radiation Protection and Research
• /
• v.35 no.4
• /
• pp.172-177
• /
• 2010

The radioactive effluents from pressurized heavy water reactors (PHWRs) are relatively larger than those from pressurized water reactors (PWRs). Futhermore, radioactive effluents from PHWRs are released continuously. Thus, the discharge of radioactive effluents is strictly controlled. To do this, radiation detectors are installed at stacks of reactor buildings to monitor the concentration of radioactive effluents in real-time. Derived release limits (DRLs) of annual discharge are also set up for each radionuclide and effluents are rigidly controlled not to exceed those limits. In this paper, the discharge process of radioactive effluents, the standard for establishment of DRL and its methodology, and currents status for PHWRs were reviewed.

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.541-546
• /
• 2000

Methods to determine L-dopa(L-3,4-dihydroxyphenylalanine) in aqueous solution by spectrofluorimetry based upon the ligand sensitized luminescence of Tb(III) ion L-dopa complex have been studied. Tb(III) ion and Lu(III) ion were used as ligand sensitized fluorescencer and co-fluorescence enhancer, respectively. The effects of excitation wavelength, pH, concentration of Tb(III) ion, concentration of Lu(III) ion and emission wavelength on the fluorescence intensity were investigated. The fluorescence intensity of the Tb(III) ion L-dopa complex was further increased with addition of Lu(III) ion. The calibration curve for L-dopa was linear over the range from 5.0 ${\times}$ $10^{-7}$ M to 1.0${\times}$ $10^{-4}$ M and the detection limit was 4.0 ${\times}$ $10^{-8}$ M under the optimal experimental conditions of 300 nm, 8.0, 1.0 ${\times}$ $10^{-4}$ M and 545 nm for excitation wavelength, pH, concentration of Tb(III) ion and emission wavelength, respectively. When Lu(III) ion was added to Tb(Ⅲ) ion L-dopa complex, the concentration range of linear response and detection limit were 1.0${\times}$$10^{-8}$ M to 2.0 ${\times}$ $10^{-4}$ M and 1.0 ${\times}$ $10^{-9}$ M, respectively under the optimal experimental conditions of 300 nm, 8.5, 1.0 ${\times}$ $10^{-5}$ M, 1.0 ${\times}$ $10^{-5}$ M, 545 nm for excitation wavelength, pH, concentration of Tb(III) ion, concentration of Lu(III) ion and emission wavelength, respectively.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.576-581
• /
• 2021

Compared to a low concentration, a high concentration clearly entails limitations in terms of predictive performance owing to differences in its frequency and environment of occurrence. To resolve this problem, in this study, an artificial intelligence neural network algorithm was used to classify low and high concentrations; furthermore, two prediction models trained using the characteristics of the classified concentration types were used for prediction. To this end, we constructed training datasets using weather and air pollutant data collected over a decade in the Cheonan region. We designed a DNN-based classification model to classify low and high concentrations; further, we designed low- and high-concentration prediction models to reflect characteristics by concentration type based on the low and high concentrations classified through the classification model. According to the results of the performance assessment of the prediction model by concentration type, the low- and high-concentration prediction accuracies were 90.38% and 96.37%, respectively.

• Journal of the Korean Institute of Gas
• /
• v.1 no.1
• /
• pp.106-112
• /
• 1997

This study measured the ignition limits of methane-air, propane-air, ethylene-air, and hydrogen-air mixture gases by discharge spark of D.C. power resistive circuit. The used experimental device is the IEC type spark ignition test apparatus, it consists of explosion chamber and supply -exhaust system of mixture gas. Mixture gases (methane-air, propane-air, ethylene-air, and hydrogen-air) were put into explosion chamber of IEC type spark ignition test apparatus, then it was confirmed whether ignition was made by 3,200 times of discharge spark between tungsten electrode and cadmium electrode. The ignition limits were found by increasing or decreasing the value of current. For the exact experiment, the ignition sensitivity was calibrated before and after the experiment in each condition. The ignition limits were found by changing the value of concentration of each gas-air mixture in D.C. 24 [V] resistive circuit. As the result of experiment, it was found that the minimum ignition limit currents exist at the value of methane-air 8.3 [$Vol\%$], propane-air 5.25[$Vol\%$], ethylene-air 7.8 [$Vol\%$], and hydrogen-air 21[$Vol\%$] mixture gases. For each the minimum ignition concentration of gases, the relationships between voltage and minimum ignition current were found. The results are as follows. - The minimum ignition limits are decreasing in the order of methane, propane, ethylene, and hydrogen. - The value of ignition current is inversely proportional to the value of source voltage. - The minimum ignition limit currents increase sharply at more than 2 [A]. The reason is caused by overheating the electrode.

• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.358-364
• /
• 2007

This study was carried out to investigate the effect of phosphorus concentrations in fertilizer solution on growth and development of nutrient deficiency in leaf perilla (Perilla frutesens). The nutrient concentrations in above ground plant tissue, petiole sap and soil solution of root media were also determined. Phosphorus deficiency resulted in a slow growth, lustreless leaves, suffused purple tining in older leaves and falling prematurely. Elevation of P concentrations in fertilizer solution increased the crop growth at 75 days after transplanting. The fresh weight in 0, 0.5 and 4.0 mM treatments were 0.48 g, 9.28 g, and 25.5 g, respectively, and dry weights were 0.06 g, 1.46 g and 4.13 g, respectively. The P concentrations in above ground plant tissue and petiole sap in 4.0 mM treatment were 1.78% and $2.040mg{\cdot}kg^{-1}$, respectively, at 75 days after transplanting. The soil P concentration in 4.0 mM treatment was $1.26mg{\cdot}kg^{-1}$ when it was determined by the 1:2 (sample:water) method. These results indicated that P concentrations higher than 0.3% in above ground plant tissue, $900mg{\cdot}kg^{-1}$ in petiole sap, and $0.57mg{\cdot}kg^{-1}$ in soil solution should be maintained to ensure proper growth of leaf perilla (Perilla frutesens).

• Journal of Korea Water Resources Association
• /
• v.31 no.1
• /
• pp.115-120
• /
• 1998

In this paper, a depth-averaged two-dimensional transport model is introduced, and its error bound is presented as the results of sensitivity analysis. The results show that the calculated SS concentration is highly dependant on Manning roughness coefficient, mixing coefficient. fall velocity. and critical shear stress. On the other hand, water level and dispersion coefficient are proved to be less significant in the variation of SS concentration.

• Fire Science and Engineering
• /
• v.28 no.3
• /
• pp.20-28
• /
• 2014

Effect of radiation models on the suppression limits in counterflow $CH_4$/air diffusion flame was numerically investigated with fundamental experiments for the numerical validation. $N_2$ and $CO_2$ were considered as extinguishing agents. The differences in extinguishing concentration between OTM and SNB radiation models which have different accuracy levels were examined. As a result, there is no considerable difference in extinguishing concentration for the $N_2$ dilution as the radiation models with different accuracy levels were used. As the $CO_2$ having strong radiative effect was diluted in the low strain flames, however, the radiation model with high predictive accuracy such as SNB should be used. In particular, the $CO_2$ dilution in fuel stream leads to the significant difference in extinguishing concentration between OTM and SNB models. Therefore, it is necessary that the radiation model should be reasonably chosen with the consideration of numerical accuracy and computational time for the prediction of extinguishing concentration.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.4
• /
• pp.339-343
• /
• 1999

This study was carried out to investigate the effects of treatments and adequate concentration of ethephon on coloring promotion of peel of sweet persimmon 'Nishimurawase' cultivar. High concentration(30 and 40㎎/l) of ethephon treatments increased the coloring of peel. but they were unfavorable to marketability due to the decrease of firmness, the increase of softening ratio, and the short of marketing critical period of fruits. Low concentration(20㎎/l) of ethephon treatment maintained higher marketability in terms of coloring of peel, firmness, softening ratio, and marketing critical period of fruit.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.331-335
• /
• 2011

흔히 진흙으로 불리는 점착성 유사는 모래 등의 비점착성 유사와는 다른 특성을 보인다. 가장 큰 특징은 점착력에 의해 서로 엉겨 붙어 큰 덩어리(플럭)를 형성하고 다시 큰 플럭이 파괴되는 과정인 응집현상(Flocculation Process)을 보인다는 것이다. 이 응집현상의 과정을 통해 플럭은 크기 및 밀도를 지속적으로 변화시킨다. 크기 및 밀도의 변화는 플럭의 침강속도를 변화시켜 점착성 유사의 부유, 퇴적, 이송, 확산의 과정에 직접적인 영향을 미친다. 응집현상은 플럭의 침강속도 뿐 아니라 부피농도와 질량농도 사이의 비선형적 관계를 야기하여 흐름 운동량 방정식 유도, 난류의 모형화 등에서도 비점착성 유사와 다른 방향으로 진행된다. 점착성 유사가 우세한 지역의 또 다른 특성은 자기하중에 의한 압밀현상에 따라 발생하는 가변적인 한계소류력이다. 따라서 점착성 유사의 이동을 모형화 하는 과정에서는 가변적인 침식율의 가정 등을 통해 이에 대한 고려가 반드시 이루어져야 한다. 흐름의 운동량 방정식 및 난류 모형에서는 플럭의 부피 농도와 질량농도가 각 항의 물리적 의미에 부합하도록 개별적으로 선택 및 적용되어야 질량보존의 문제 등으로 발생할 수 있는 계산상의 오류를 배제할 수 있다. 적용 결과, 점착성 유사가 우세한 지역에서 나타나는 높은 부유 및 흐름정체기에서의 부유사 존재 등의 특성이 점착성 유사 이동을 위한 모형에서 보다 합리적으로 계산된다는 사실이 확인되었다. 그리고 비점착성 유사에 적합한 이동 모형이 점착성이 우세한 지역에 적용될 경우, 상황에 따라 유사량을 과대 및 과소 산정할 수 있다는 결론이 도출되었다. 조류의 영향이 존재하는 하구부의 경우에는 조류의 형태와 비대칭성에 따라 유사량의 차이가 큰 것으로 나타났다. 조류의 형태는 주로 하구부의 지형에 의해 결정되므로 준설, 매립, 확폭 등과 같은 하구부에서의 사업이 진행되는 경우, 유사량 변화에 대한 고려가 반드시 이루어져야 할 것으로 판단된다.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.115-122
• /
• 2019

Foliar fertilization of carbonated water during lettuce hydroponic cultivation was increased photosynthetic rate and stomatal conductance as higher carbon dioxide concentration of carbonated water The higher the carbon dioxide concentration in the carbonated water was better growth of lettuce. However, the carbon dioxide concentration of 500 ppm and 700 ppm in the carbonated water was increased the tip-burn occurrence, and the yield was higher in the 300 ppm. the carbon dioxide concentration of 300 ppm in the carbonated water was lower in the fresh weight but increased yield resulted in the lower of the tip-burn occurrence The high temperature limits for growth were 32℃ in the control, 33℃ in the 300ppm and 34℃ in the 500 ppm according to analyze chlorophyll fluorescent Fo. The high temperature tolerance in lettuce increased approximately 4℃ by foliar fertilization treatments of carbonated water under this experiment conditions. Also the activity of SOD(superoxide dismutase), the antioxidant enzyme, was higher with high carbon dioxide concentration of the carbonated water.