• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.12 no.20
• /
• pp.25-32
• /
• 1989

열화수신포에 있어서 확률론적 신뢰도설계 및 단순스트레스와 강도의 고장모형은 렌덤 수치들로 구성된 각 분포의 간섭(Interference) 확률에 의해 이루어진다. 현재까지 이러한 분포모형들의 신경도는 분석적, 수치적 또는 모의실험방법론학에 의해서 단일추정치를 계산및 해석하여 왔으나 현실적으로는 스트레스 강도함수 분포의 간섭구간에 있어서 그 렌덤 변수들에 대한 완전한 실제의 분포들을 파악하기란 너무 복잡하고 때로는 불가능하다. 이를 위해서는 신뢰도의 상·하한 결정으로 신뢰도설계를 하는 방법이 고려된다. 본 연구에서는 스트레스와 강도의 렌덤 변수들에 대한 중복부분(Overlapping tails) 내에 있어서 각각의 주어진 구간확률을 제약조건으로 하여 최적신뢰도 한계를 결정 및 설계하는 새로운 기법을 제시한다. 설계신뢰도의 최적상한 및 하한 값은 제공하기 위하여 비선형모형인 Quadratic programming optimization 기법을 이용하여 신뢰도분석관점에 입각한 특수구조모형을 설정하고 이에 대한 수치예를 들어 예증하였다.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.8
• /
• pp.2520-2527
• /
• 2000

An improved transition density propagation method for power estimation is proposed. The power estimation for the zero delay model is a proper criteria for the.lower boutldlIry for power consumption. A transition propagation method, including the zero delay model as a lower boundary for power stimation was studied. However, there were some redundancy factors in the process of transition density propagation. Hence this paper will explore the transition density propagation behavior to eliminate the redundancy factors and present theirriprQved estimation methodology for the signal transition density. The experiments show that the proposed method has comparably better estimation accuracy than the conventional methods.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.01a
• /
• pp.89-92
• /
• 2011

본 논문에서는 컬러 영상에 대해 삼각형 타입의 소속 함수를 적용하여 스트레칭의 상한과 하한을 동적으로 설정하고 영상을 스트레칭 하는 방법을 제안한다. 제안된 퍼지 스트레칭 방법은 평균 밝기 값을 기준으로 가장 어두운 픽셀 값과 가장 밝은 픽셀 값의 거리를 계산하여 밝기의 조정율을 결정한 후, 최소 밝기 값 및 최대 밝기 값을 구하고 삼각형 타입 소속 함수의 구간에 적용한다. 영상의 픽셀 값들을 소속 함수에 적용하여 소속도를 구하고 cut를 적용하여 가장 낮은 픽셀 값을 스트레칭 하한으로 가장 높은 픽셀 값을 스트레칭 상한으로 설정하여 컬러 영상을 스트레칭 한다. 다양한 영상에 적용한 결과, 기존의 스트레칭 방법보다 제안된 퍼지 스트레칭 방법이 효율적인 것을 확인하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.11a
• /
• pp.234-237
• /
• 2011

본 논문에서는 모델 기반 카메라 추적 시 필요한, 사전 정의 된 실측 모델의 정확성이 카메라 추적의 정확성에 미치는 영향에 대하여 논의한다. 이를 위하여 모델 기반과 특징점 기반의 카메라 추적에 가중치를 두고 혼합시켜 이용하는 하이브리드 카메라 추적 방법을 사용하고, 이 방법을 활용한 상호작용형 모델링(interactive modeling)을 이용하여 실측 모델을 제작한다. 또한, 상호작용형 모델링 과정에서 생기는 실측 모델의 오차로 인해 발생하는 카메라 추적 오차를 Cramer-Rao 하한(lower bound)을 이용하여 정의하고, 이 둘의 상관관계를 실험적으로 도출한다. 이를 통해 사전 정의된 실측 모델이 가질 수 있는 오차의 하한을 실험적으로 검증한다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.153-157
• /
• 2002

일반적으로 가변구조제어는 외란과 변수 변화에 대해 강인한 특성을 가지지만 제어기 설계자는 이러한 값들에 대한 상한 값과 하한 값을 알아야한다. 그러나 때로는 이러한 상한 값과 하한 값을 얻는다는 것은 쉽지가 않다. 이에 반해 퍼지제어기는 외란과 변수 변화에 대한 제어기 설계에 있어서 효과적인 방법을 제공한다. 따라서 퍼지제어기와 가변구조제어기가 가지는 장점들을 결합하는 연구가 진행되어져 왔다. 본 논문에서는 리칭페이저가 존재하는 기존의 슬라이딩모드제어기를 이용하는 방법 대신 리칭페이저를 제거하여 전 구간 강인한 적응 퍼지 가변구조제어기를 설계하였다. 제안된 제어 알고리듬은 BLDC 전동기의 위치제어기로 사용하였으며, 그 타당성을 입증하였다.

• The Korean Journal of Applied Statistics
• /
• v.23 no.5
• /
• pp.967-975
• /
• 2010

Since the least squares estimation is not appropriate when multicollinearity exists among the regressors of the linear regression model, the principal components regression is used to deal with the multicollinearity problem. This article suggests a new procedure for the selection of suitable principal components. The procedure is based on the condition index instead of the eigenvalue. The principal components corresponding to the indices are removed from the model if any condition indices are larger than the upper limit of the cutoff value. On the other hand, the corresponding principal components are included if any condition indices are smaller than the lower limit. The forward inclusion method is employed to select proper principal components if any condition indices are between the upper limit and the lower limit. The limits are obtained from the linear model which is constructed on the basis of the conjoint analysis. The procedure is evaluated by Monte Carlo simulation in terms of the mean square error of estimator. The simulation results indicate that the proposed procedure is superior to the existing methods.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.3
• /
• pp.218-227
• /
• 2017

In this paper, an algorithm to calculate both bearing and distance error for target detection and localization is proposed using the Cramer Rao lower bound to estimate the minium variance of their error in DOA (Direction Of Arrival) estimation. The performance of arrays in detection and localization depends on the accuracy of DOA, which is affected by a variation of SNR (Signal to Noise Ratio). The SNR is determined by sonar parameters such as a SL (Source Level), TL (Transmission Loss), NL (Noise Level), array shape and beam steering angle. For verification of the suggested method, a Monte Carlo simulation was performed to probabilistically calculate the bearing and distance error according to the SNR which varies with the relative position of the target in space and noise level.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.5
• /
• pp.987-998
• /
• 2014

The primary purpose of this paper is to derive a benchmark dose lower limit (BMDL) of lead for the attention deficit/hyperactive disorder (ADHD) based on a longitudinal cohort data set which is referred to as CHEER data set. The CHEER data were recently recruited from the Ministry of Environment of S. Korea to investigate the effect of environment on children's health We first confirm the correlation of ADHD with the blood lead level using a linear mixed effect model. We report from the longitudinal characteristic of CHEER data that ADHD scores tend to have "regression to the mean". A dose-response curve of blood lead level with ADHD being the end point is derived and from this dose-response curve a few BMDLs are derived based on corresponding assumptions on the benchmark region.

• Korean Journal of Clinical Laboratory Science
• /
• v.47 no.4
• /
• pp.237-242
• /
• 2015

The coagulation factor activity compared two groups of the lower 10% (29.1~30.9 sec) and the upper 10% (38.0~41.9 sec) of the normal reference range of aPTT. The aim of this study was to investigate the influence of sex, age, and ABO blood type on coagulation factor activity. There was significant difference in the activity of the coagulation factor assay based on age. The VIII (p<0.0001) and IX (p=0.0050) in the lower group of samples from those over sixty years of age is higher than from those under sixty. In contrast, XII (p=0.0285) for samples over sixty was lower than for samples under sixty. While in the upper group V (p=0.0219), VIII (p=0.0005), and IX (p=0.0014) for samples from the over sixty group was higher than those under sixty. In the case of activity of coagulation factor between O and non-O blood type, VIII (p<0.001) activity of the non-O blood type was higher than that of the O blood type in the both groups. The XII (p=0.016) activity of non-O blood type was lower than that of O blood type in the upper group. According to the multiple logistic regression analysis, when other variables are under the same conditions between lower and upper groups, there is a strong possibility for the lower group when activity of V (p=0.001), VIII (p<0.001), X (p<0.001) and XII (p<0.001) is increased. Furthermore, there is also a strong possibility of upper group when activity of II (p=0.004) and IX (p=0.012) is increased. However, no significant difference in between sex, age and XI was observed.

• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.59-66
• /
• 2004

Thermosensitive poly(N-isopropylacrylamide) gels containing temperature-sensitive liposomes showing temperature-dependent sol-gel transition were prepared. The surface of temperature-sensitive liposome was modified with copolymers of N-isopropylacrylamide and octadecylacrylate, which exhibited a lower critical solution temperature at around 30 $^{\circ}C$ After mixing the modified temperature-sensitive liposomes with poly(N-isopropylacrylamide) solution, the temperature-sensitive 1iposomes formed physically cross-linked gels through heating the solution above their lower critical solution temperatures. The release of drug from temperature-sensitive liposomes was determined by measuring fluorescence intensity. The drug release from temperature-sensitive liposomes in poly(N-isopropylacrylamide) gel gradually showed sustained-release with increasing temperature.