• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.550-551
• /
• 2005

고밀도 유도결합 플라즈마 장치의 $O_2$ 방전에 대한 공간 평균 시뮬레이터를 제작하였다. 제작된 시뮬레이터는 $O_2$ 플라즈마 방전에서 발생되는 전자, 양이온, 음이온 및 중성종, 활성종들에 대해 공간 평균된 유체 방정식을 기반으로 하고 있으며, 고밀도 유도결합 플라즈마 장치에서 전자가열 모델은 anomalous skin effect 를 고려한 파워 흡수 모델을 적용하여 전자가 흡수하는 고주파 파워량을 결정하였다. 완성된 시뮬레이터에서 RF- 파워, gas-inlet, pumping-speed등의 조정 변수를 비롯한 여러 가지 장치 변수들의 변화에 대한 하전입자, 중성종, 활성종들의 밀도 변화 및 전자 온도 의존성을 계산하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.209-212
• /
• 1995

In this paper, the $(Sr_{0.85}{\cdot}Ca_{0.15})TiO_3$ of paraelectric grain boundary layer (GBL) ceramics were fabricated. The characteristics of electrical conduction and the thermally stimulated current(TSC) were measured respectively. The region I below 200[V/cm] shows the ohmic conduction, the region II between 200[V/cm] and 1000[V/cm] can be explained by the Pool-Frenkel emission theory, and the region III above 2000[V/cm] is dominated by the tunneling effect. As a result, The origins of these peaks are that the ${\alpha}$ peak observed at $-20[^{\circ}C]$ looks like to be ascribed to the ionization excitation from donor level in the grain, and the ${\alpha}^{\prime}$ peak observed at $-20[^{\circ}C]$ appears to show up by detrap of the trapped carrier of border between the oxidation layer and the grain, and the ${\beta}$ peak observed at $80[^{\circ}C]$ seems to be resulted from hopping conduction of existing carrier in the trap site of the border between the oxidation and second phase.

• Clean Technology
• /
• v.27 no.2
• /
• pp.182-189
• /
• 2021

The adsorption of disperse yellow 3 (DY 3) on granular activated carbon (GAC) was investigated for isothermal adsorption and kinetic and thermodynamic parameters by experimenting with initial concentration, contact time, temperature, and pH of the dye as adsorption parameters. In the pH change experiment, the adsorption percent of DY 3 on activated carbon was highest in the acidic region, pH 3 due to electrostatic attraction between the surface of the activated carbon with positive charge and the anion (OH^-) of DY 3. The adsorption equilibrium data of DY 3 fit the Langmuir isothermal adsorption equation best, and it was found that activated carbon can effectively remove DY 3 from the calculated separation factor (R_L). The heat of adsorption-related constant (B) from the Temkin equation did not exceed 20 J mol^-1, indicating that it is a physical adsorption process. The pseudo second order kinetic model fits well within 10.72% of the error percent in the kinetic experiments. The plots for Weber and Morris intraparticle diffusion model were divided into two straight lines. The intraparticle diffusion rate was slow because the slope of the stage 2 (intraparticle diffusion) was smaller than that of stage 1 (boundary layer diffusion). Therefore, it was confirmed that the intraparticle diffusion was rate controlling step. The free energy change of the DY 3 adsorption by activated carbon showed negative values at 298 ~ 318 K. As the temperature increased, the spontaneity increased. The enthalpy change of the adsorption reaction of DY 3 by activated carbon was 0.65 kJ mol^-1, which was an endothermic reaction, and the entropy change was 2.14 J mol^-1 K^-1.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.10
• /
• pp.10-16
• /
• 2008

Generally, the satellite circling round in a low orbit goes through Van Allen belt connecting with the magnetic fold, in which electronic components are easily damaged and shortened by charged particles moving in a cycle between the South Pole and the North Pole. In particular, Single Event Upset(SEU) by radiation could cause electronic device on satellite to malfunction. Based on the idea mentioned above, this study considersabout SEU effect on the On-board Computer(OBC) of STSAT-1 in the space environment radiation, and shows algorithm to cope with SEUs. In this experiment, it also is shown that the repetitive memory read/write operation called memory wash is needed to prevent the accumulation of SEUs and the choice for the period of memory wash is examined. In conclusion, it is expected that this research not only contributes to understand low capacity of On-board Computer(OBC) on Low Earth Orbit satellite(LEOS) and SaTReC Technology satellite(STSAT) series, but also makes good use of each module development of Korea Multi-Purpose Satellite(COMPSAT) series.

• Journal of Life Science
• /
• v.23 no.6
• /
• pp.838-846
• /
• 2013

As a forth state of material, plasma is ionized gas, which generates characteristically various reactive species. After late of $20^{th}$ century, plasma has been widely used in industry. After nonthermal atmospheric plasma was developed, it has been applied to biomedical fields. Nonthermal atmospheric plasma does not give thermal damages to human tissues, and it shows the high efficiency in cancer treatment, sterilization, tooth bleaching, coagulation, and wound healing. Because the application of plasma to biomedicine has been expanded through interdisciplinary studies, its value of high medical technology is increasing now. Since nonthermal atmospheric plasma was first applied to the mammalian cells and microorganisms, many valuable studies has been performed for about last 10 years, so that now the new research area called 'plasma medicine' has been formed. This article introduces the recent data resulted from plasma medicine and helps to understand the plasma medicine.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.51-56
• /
• 2001

$CeO_2$ thin films as insulator for MFISFET (Metal-ferroelectric-insulator- semiconductor-field effect transistor) were deposited by r.f. magnetron sputtering. Ar and $O_2$ gas as the deposition gas were used and the effects of oxygen partial pressure during sputtering on texture and electrical properties of $CeO_2$ thin films were evaluated. All $CeO_2$ thin films deposited on p-type Si(100) substrate at $600^{\circ}C$ exhibited (200) preferred orientation. The films deposited with only Ar gas among various condition had highest preferred orientation but show large hysteresis characteristics in capacitance-voltage measurement due to relatively many charged paricles and roughness. Films show smooth surface state and good C-V characteristics with increasing oxygen partial pressure. It was thought that this trend in C-V characteristics was due to the amount of mobile ionic charge within $CeO_2$ films. The composition of films show oxygen excess, that is, O/$Ce_2$ ratio of films was 2.22~2.42 range and leakage current of films show $10^{-7}~10^{-8}A$order at 100 kV/cm.

• Nuclear Engineering and Technology
• /
• v.22 no.2
• /
• pp.108-115
• /
• 1990

The measurements of X-ray production cross-sections for 0.5~1.2-MeV proton beam are carried out on Cu and Au. For this experiment, the proton tram generated from the SNU 1.5-MV Tandem Van do Graaff accelerator is Incident on the target. The X-rays and the backscattered protons from the irradiated target are detected simultaneously by the Si(Li) X-ray detector and the SSB (Silicone Surface Barrier) charged particle detector The measured values of X-ray production cross-sections are compared with other experimental values and theoretical values such as the PWBA (Plane Wave Born Approximation) and the ECPSSR(Perturbed Stationary State corrected Energy loss, Coulomb deflection, Relativistic effects) values. For measured cross-sections near 1.0- MeV proton energy, the ECPSSR (D.D. Cohenet al., 1985) shows better agreement than the PWBA. Particularly, that of Au for 1.2 MeV proton beam is 9.69$\pm$ 0.39 barns which deviates from the ECPSSR by less than 5%. and the experimental data for 0.5~1.2- MeV proton agree with most of other experimental values within 30%.

• The Korean Journal of Applied Statistics
• /
• v.27 no.4
• /
• pp.543-552
• /
• 2014

High bandwidth RF such as Bluetooth, GPRS, EDGE, 3GSM, HSDPA is papular in the mobile phone market. A non-conducting metal coating process requires an e-beam deposition of metal, two steps of UV hard coating primer and top coating; however, it is inefficient. We navigate to the electron beam irradiation conditions(resin surface treatment conditions) in the PC/ABS resin injection process. By analyzing the experimental results, we find the optimum development conditions for the electro deposition pre-treatment process and mass production lines using the plasma generated electron beam source.

• Journal of the Korean Vacuum Society
• /
• v.18 no.6
• /
• pp.426-434
• /
• 2009

A global simulation of $SiH_4/H_2$ discharge is conducted in a planar-type inductively coupled plasma (ICP) discharge. We numerically solve a set of spatially averaged fluid equations for electrons, positive ions, negative ions, neutrals, and radicals. Absorbed power by electrons is determined by an analytic electron heating theory including the anomalous skin effect. Also, we investigate functional dependence of various discharge quantities such as the densities of various species and the temperature of electron on external controllable parameters such as ratio between $SiH_4$ and $H_2$, power and pressure.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.1
• /
• pp.40-46
• /
• 2007

A laboratory scale experiment on phenol conversion properties by pulsed corona discharge process was carried out. Effects of operating parameters such as applied voltage, input oxygen, and electrode geometry on phenol conversion and solution properties were investigated. Electrical discharges generated in liquid phase increased the liquid temperature by heat transfer from current flow, decreased the pH value by producing various organic acids from phenol degradation, and increased conductivity by generating charge carriers and organic acids. The oxygen supply enhanced the phenol conversion through the ozone generation dissolution and the production of OH radicals. Series type electrode configuration induced more ozone production than reference type configuration because it produced gas phase discharges as well as liquid phase discharges. Therefore, the higher phenol conversion and TOC(total organic carbon) removal efficiency were obtained in series type configuration.