• Prospectives of Industrial Chemistry
• /
• v.22 no.5
• /
• pp.1-13
• /
• 2019

국제해사기구(IMO, international maritime organization)는 2015년부터 배출규제해역(ECA, emission control area)을 운항하는 선박은 황 함유량이 0.1%(m/m) 이하로 강화된 기준을 만족하는 연료를 사용해야 하며, 2020년부터는 모든 선박에 대해 황 함유량이 0.5%(m/m) 이하인 연료를 사용하거나 동등 이상의 성능을 갖는 배출가스 후처리 장치의 설치를 의무화하였다. 이에 따라, 선박에서 배출되는 오염물질을 제어할 수 있는 다양한 기술이 개발되고 있으며, 후처리 관점에서 습식 스크러버(wet scrubber)는 선박의 디젤 엔진에서 배출되는 이산화황(sulfur dioxide)을 저감시키기 위한 가장 적합한 해결책으로 알려져 있다. 습식 스크러버는 해수를 사용하는 개방형 스크러버(open loop scrubber)와 화학세정수를 사용하는 폐쇄형 스크러버(closed loop scrubber)로 구분된다. 습식 스크러버는 오염물질의 효율적인 처리가 가능하지만 유지보수비가 비싸고, 폐수 발생으로 인한 2차 오염발생 및 부식에 매우 취약한 단점이 있다. 따라서 최근에는 스크러버 내부의 부식을 방지하기 위한 내부식성 재질에 관한 연구와 흡수제(absorbent)의 고도화 연구가 활발히 진행되고 있다. 또한, 하이브리드형 스크러버(hybrid scrubber)는 개방형과 폐쇄형 스크러버의 장점을 결합한 기술로 황산화물의 배출을 규제하는 배출규제해역에서는 폐쇄형 스크러버를 가동하고, 선박이 공해상으로 진입할 경우 개방형 스크러버로 전환함에 따라 황산화물 배출 및 반응 후 세척수의 폐수배출 기준을 동시에 만족할 수 있다.

• Journal of Broadcast Engineering
• /
• v.25 no.5
• /
• pp.758-769
• /
• 2020

Hybrid broadcasts utilizing heterogeneous networks can provide not only uniform broadcasting services but also various services using broadcast networks and communication networks. In particular, as content is consumed in various countries and regions, demands for personalized services continue to increase, and research on content insertion technology utilizing heterogeneous networks has been actively conducted. The most important technical challenge when inserting content based on heterogeneous networks is that the start of the inserted content, which replaces the original broadcast content at the time of content insertion, should proceed smoothly, and it must be able to accurately return to the original broadcast content. Currently, UHD broadcasting is converted to digital. However, since there is a system that supports the frame rate used in the analog method, when content insertion occurs in a conventional UHD broadcasting service, there is a problem in decoding the broadcast and inserted content. Since the replacement cost of the broadcasting system is astronomical, this paper proposes a content insertion method using by frame control that can support analog methods without replacing transmission equipment.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.42-51
• /
• 1998

This paper suggests a congestion control scheme for CL (ConnectionLess) overlay network using the feedback loops between CL user and CL server, between CL servers, and between end-to-end CL users, and the header translation table of CL server. The CL overlay network for CBDS(Connectionless Broadhand Data Service) defined by ITU-T((International Telecommunication Union-Telecommunication) consists of CL servers which route frames and links which connect between CL user and CL server or between CL servers. In the CL overlay network, two kinds of congestion, CL link congestion and CL server congestion, may occur. We considered the schemes to solve the congestion. link-by-link method[18] has used the ABR feedback loops of ATM layer between CL user and CL server or between CL servers, and the congestion table using header translation table of CL server. As in congestion of output virtual channel this method has an effect on all the traffic transmitting through the link, then it has an effect on the traffic that has not caused the congestion. As a result, the link utilization of output virtual channel that does not bring the congestion and outputs the traffic is decreased. To overcome this drawback of link-by-link, we proposed the hybrid method that are using the ABR feedback loops of link-by-link method, the feedback loop between CL users in end-to-end, the congestion table using and the header translation table. This scheme deals with teh congestion immediately by link-by-link loops and the header translation table, and then regulates the sending rate of CL user that causes the congestion by end-to-end loop.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.288-296
• /
• 2019

Radiation cooling has used ceilings or floors as cooling surfaces. In such cases, to avoid moisture condensation on the surface, the surface temperature needs be higher than the dew point temperature or an additional dehumidifier is added. In this study, with a goal for residential application, intentional moisture condensation on the cooling surface was attempted, which increased the cooling capacity and improved the indoor comfortness. This method included two separate refrigeration cycles - convection-type dehumidifying cycle and the panel cooling cycle. Test results on the panel cooling cycle showed that, at the standard outdoor ($35^{\circ}C/24^{\circ}C$) and indoor ($27^{\circ}C/19.5^{\circ}C$) condition, the refrigerant flow rate was 8.8 kg/h, condensation temperature was $51^{\circ}C$, evaporation temperature was $8.8^{\circ}C$, cooling capacity was 376 W and COP was 1.75. Furthermore, the panel temperature was uniform within $1^{\circ}C$ (between $13^{\circ}C$ and $14^{\circ}C$). As the relative humidity decreased, the cooling capacity decreased. However, the power consumption remained approximately constant. In the convection-type dehumidification cycle, the refrigerant flow rate was 21.1 kg/h, condensation temperature was $61^{\circ}C$, evaporation temperature was $5.0^{\circ}C$, cooling capacity was 949 W and COP was 2.11 at the standard air condition. When both the radiation panel cooling and the dehumidification cycle operated simultaneously, the cooling capacity of the radiation panel cycle was 333 W and that of the dehumidification cycle was 894 W, and the COP was 1.89. As the fan flow rate decreased, both the cooling capacity of the radiation panel and the dehumidification cycle decreased, with that of the dehumidification cycle decreasing at a higher rate. Finally, a possible control logic depending on the change of the cooling load was proposed based on the results of the present study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.1-8
• /
• 2016

Current sensors are used widely in the fields of current control, monitoring, and measuring. They have become more popular with the increasing demand for smart grids in a power network, generation of renewable energy, electric cars, and hybrid cars. Although open loop Hall effect current sensors have merits, such as low cost, small size, and weight, they have low accuracy. This paper describes the design and fabrication of a 300A open loop current sensor that has high accuracy and temperature performance. The core of the current sensor was calculated numerically and the signal conditioning circuits were designed using circuit analysis software. The characteristics of the manufactured open loop current sensor of 300 A class was measured at currents up to 300 A. According to the test of the current sensor, the accuracy error and linearity error were 0.75% and 0.19%, respectively. When the temperature compensation was carried out with the relevant circuit, the temperature coefficients were less than $0.012%/^{\circ}C$ at temperatures between $-25^{\circ}C$ and $85^{\circ}C$.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.6
• /
• pp.84-90
• /
• 1982

In this paper we exploit the use of the intermittent property of speech to reduce the transmission rate or to increase signal-to-quantization noise ratio (SQNR) in coding speech by hybrid companding data modulation (HCDM). In this scheme we detect silence in speech by a speech/silence discriminator. HCDM coding is done only for speech portion. For silence that is detected in evert block of 5 ms, only the information indicating that the Since the HCDM coder transmits bina교 signal synchronously at a fixed rate, the use of a buffer and its efficient control is essential. By using the HCDM with silence detection in coding speech, we could improve SONR by as much as 6 dB over the conventional HCDM or reduce the transmission rate by one third of the HCDM rate.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.330-335
• /
• 2018

A new approach for the fabrication of organic-organic conducting composite thin films using simultaneous co-vaporization vapor phase polymerization (SC-VPP) of two or more monomers that have different polymerization mechanisms (i.e., oxidation-coupling polymerization and radical polymerization) was reported for the first time. In this study, a PEDOT-PSMA composite thin film consisting of poly(3,4-ethylenedioxythiophene)(PEDOT) and poly(styrene-co-maleic anhydride)(PSMA) was prepared by SC-VPP process. The preparation of organic-organic conductive composite thin films was confirmed through FT-IR and $^1H-NMR$ analyses. The surface morphology analysis showed that the surface of PEDOT-PSMA thin film was rougher than that of PEDOT thin film. Therefore, PEDOT-PSMA exhibited lower electrical conductivity than that of PEDOT. But the conductivity can be improved by adding 2-ethyl-4-methyl imidazole as a weak base. The contact angle of PEDOT-PSMA was about $50^{\circ}$, as compared to $62^{\circ}$ for PEDOT. The demonstrated methodology for preparing an organic-organic conductive hybrid thin film is expected to be useful for adjusting intrinsic conductive polymer (ICP)'s surface properties such as mechanical, optical, and roughness properties.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1325-1332
• /
• 2009

In this paper, we design a 2.4 GHz bio-radar system that can detect human heartbeat and respiration signals with small size and improved noise performance using single circular-polarized antenna and phase-locked loop. The demonstrated bio-radar system consists of single circular-polarized antenna with $90^{\circ}$ hybrid, low-noise amplifier, power amplifier, voltage-controlled oscillator with phase-locked loop circuits, quadrature demodulator and analog circuits. To realize compact size, the printed annular ring stacked microstrip antenna is integrated on the transceiver circuits, so its dimension is just $40\times40mm^2$. Also, to improve signal-to-noise-ratio performance by phase noise due to transmitter leakage signal, the phase-locked loop circuit is used. The measured results show that the heart rate and respiration accuracy was found to be very high for the distance of 50 cm without the additional digital signal processing.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.4
• /
• pp.657-667
• /
• 2020

The Android framework allows apps to take full advantage of personal information through granting single permission, and does not determine whether the data being leaked is actual personal information. To solve these problems, we propose a tool with static/dynamic analysis. The tool analyzes the Source and Sink used by the target app, to provide users with information on what personal information it used. To achieve this, we extracted the Source and Sink through Control Flow Graph and make sure that it leaks the user's privacy when there is a Source-to-Sink flow. We also used the sensitive permission information provided by Google to obtain information from the sensitive API corresponding to Source and Sink. Finally, our dynamic analysis tool runs the app and hooks information from each sensitive API. In the hooked data, we got information about whether user's personal information is leaked through this app, and delivered to user. In this process, an automated Source/Sink classification model was applied to collect latest Source/Sink information, and the we categorized latest release version of Android(9.0) with 88.5% accuracy. We evaluated our tool on 2,802 APKs, and found 850 APKs that leak personal information.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.503-510
• /
• 2006

Readout circuit is to convert signal occurred in a defector into suitable signal for image signal processing. In general, it has to possess functions of impedance matching with perception element, amplification, noise reduction and cell selection. It also should satisfies conditions of low-power, low-noise, linearity, uniformity, dynamic range, excellent frequency-response characteristic, and so on. The technical issues in developing image processing equipment for focal plane way (FPA) can be categorized as follow: First, ultraviolet (UV) my detector material and fine processing technology. Second, ReadOut IC (ROIC) design technology to process electric signal from detector. Last, package technology for hybrid bonding between detector and ROIC. ROIC enables intelligence and multi-function of image equipment. It is a core component for high value added commercialization ultimately. Especially, in development of high-resolution image equipment ROIC, it is necessary that high-integrated and low-power circuit design technology satisfied with design specifications such as detector characteristic, signal dynamic range, readout rate, noise characteristic, ceil pitch, power consumption and so on. In this paper, we implemented a $8\times8$ FPA prototype ROIC for reduction of period and cost. We tested unit block and overall functions of designed $8\times8$ FPA ROIC. Also, we manufactured ROIC control and image boards, and then were able to verify operation of ROIC by confirming detected image from PC's monitor through UART(Universal Asynchronous Receiver Transmitter) communication.