• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.543-546
• /
• 2006

최근 여러 연구에서 다양한 종류의 멀티 모드 하이브리드 동력 전달계가 제안되고 있다. 멀티모드 동력전달계는 두 개 이상의 다른 유성기어식 하이브리드 시스템으로 이루어져 있으며 클러치를 사용하여 각 상황에 유리한 유성기어 시스템을 사용하여 주행한다. 각 유성기어 시스템의 단점들을 보완할 수 있기 때문에 단일 모드를 사용하여 주행했을 때보다 여러 면에서 높은 성능을 보인다. 일반적으로 유성기어식 하이브리드 시스템은 크게 입력, 출력, 복합 분기식의 세 가지 종류로 나눌 수 있는데 이 논문에서는 입력 및 복합 분기식 구조의 특징을 분석해 보았다. 또한 시뮬레이션을 통해 입력, 복합 분기식 구조를 사용하여 듀얼 모드를 구성하였을 때 단일 모드와 비교하여 어느정도의 성능을 보이는지 알아보았다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.535-537
• /
• 2015

본 연구에서는 비상전원 공급기능을 포함한 하이브리드 ESS(Energy Storage System)를 제안한다. 기존의 ESS에 UPS(Uninterruptible Power Supply)의 비상전원 공급기능을 포함한 하이브리드 ESS의 운전모드는 배터리 충전 모드, 수요관리 운전모드 1, 수요관리 운전모드 2, 비상 운전 모드 총 4가지 모드로 구성 되어 있다. 비상전원 공급기능을 포함한 하이브리드 ESS의 운전모드 간 절환 시 과도 응답을 검증하기 위해 3상 50[kW] 시제품을 제작하였고, 이 시제품을 통해 운전 모드간의 절환 시 과도 응답을 검증 하였다.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.531-542
• /
• 2002

An input and output buffering ATM switch conventionally operates in either Queueloss mode or Backpressure mode. Recently, a new mode, which is called Hybrid mode, was proposed to overcome the drawbacks of Queueloss mode and Backpressure mode. In Hybrid mode, when both the destined output buffer and the originfted input buffer are full, a cell is dropped. This thesis analyzes the cell loss rate and the cell delay of Queueloss, Backpressure and Hybrid modes in a switch adopting output-port expansion scheme under uniform traffic. Output-port expansion scheme allows only one cell from an input buffer to be switched during one time slot. If several cells switch to a same destined output port, the number of maximum transfer cells is restricted to K (Output-port expansion ratio). The simulation results show that if an offered load is less than 0.9, Hybrid mode has lower cell loss rate than the other modes; otherwise, Queueloss mode illustrates the lowest cell loss rate, which is a different result from previous researches. However, the difference between Hybrid and Queueloss modes is comparably small. As expected, the average cell delay in Backpressure mode is lower than those of Queueloss mode and Hybrid mode, since the cell delay due to the retransmission of higher number of dropped cells in Backpressure mode is not considered.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.9
• /
• pp.801-805
• /
• 2016

In this paper, engine clutch engagement shock is analyzed during the mode change of plug-in hybrid electric vehicles. Multi-driving mode includes the EV (electric vehicle) mode, HEV (hybrid electric vehicle) mode, and engine operating mode. Depending on the mode change, the engine clutch is either engaged or disengaged. The magnitude of shock during clutch engagement is very important because it impacts vehicle acceleration and clutch synchronization speed, which affects ride comfort substantially. The performance simulator of plug-in hybrid electric vehicles was developed using MATLAB/Simulink. The simulation results show that the mode change control algorithm is necessary for minimizing shock during clutch engagement.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.81-85
• /
• 2012

In this paper, the typical combustion instabilities in hybrid rocket were studied. To induce combustion instabilities in the combustor with the diaphragms were mounted, on front and rear of the fuel, and combustion experiments were performed. The calculated theoretical frequencies using Longitudinal Acoustic Mode and Helmholtz Mode are compared with experimental frequencies using FFT analysis. The theoretical calculated results showed good agreements with experimental results are compared.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.293-294
• /
• 2011

본 논문에서는 유성기어를 사용한 직병렬 혼합형 하이브리드 자동차(SPHEV)의 파워트레인 모델링과 하이브리드 자동차의 모드(전기자동차 모드(EV), 엔진 모드, 하이브리드 모드(HEV) 등등)변화에 따른 파워 분배 및 동특성 해석에 대하여 기술한다. 내연기관, 전동기, Energy Storage System(ESS)과 같은 구성요소들의 정격은 에너지 개념과 Electrical Peaking Hybrid(ELPH)를 이용하여 설계하였으며, 동특성 분석을 위하여 전력전자 분야 에서 널리 사용되고 있는 시뮬레이션 툴인 PSIM을 이용하여 모델링 하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.69-76
• /
• 2017

In this study, design of a small hybrid rocket is carried out using Failure Mode and Effects Analysis (FMEA) and Criticality Analysis(CA), which is a method for qualitative and semi-quantitative reliability analysis. In order to carry out FMEA, the structure of the hybrid rocket is divided into 31 parts and 72 potential failure modes. As a result of the FMEA, the relationship between potential failure modes, causes and effects, and their severity are evaluated qualitatively. Criticality analysis is followed for the failure modes, in which the criticality number is estimated using the failure rate information available from the handbook. Moreover, the failure modes with higher criticality and severity are chosen for improvement, and a series of design or material changes are made for the improvement of the hybrid rocket reliability.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.485-494
• /
• 2016

In this work, we conducted a study of fuel consumption characteristics and regenerative braking recovery rate by conducting an experiment using a TMED type parallel hybrid electric vehicle. As regenerative braking technology is considered essential to improve the energy efficiency of the hybrid vehicle, it is necessary to conduct research on the regenerative braking system. Therefore, the electrical characteristics, current balance, and fuel consumption were investigated using an EC type chassis dynamometer with experimental conditions as per IM240 mode. From the results, it was observed that when the initial SOC condition was lower, the engine operating time of the hybrid vehicle increased, and the energy efficiency decreased. While operating in the driving mode characteristics condition and the driving characteristics condition, the difference in the average fuel consumption was not significant. However, after completion of the experiment, there was a difference in the engine operation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.245-250
• /
• 2017

Worldwide environmental regulations have been enhanced for emission reduction of greenhouse gases and air pollutants; accordingly, some measures were prepared. Furthermore, the need for effective and reasonable energy-saving methods is growing in accordance with that for environmental pollution minimization. In the case of marine engineering, techniques for the development of eco-friendly vessels have been actively studied, including reduction of exhaust gas emissions, development of alternative fuel, and development of a new propulsion system. In this study, we presented the basic concepts and analyzed the speed, current, voltage, and output power characteristics of each operating mode, i.e., operating mode of battery, generator, and full power.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.3-4
• /
• 2017

컨버터 제어를 위한 피크 전류 모드는 기존의 전류 모드 제어 기법에 비해 빠른 응답과 간단한 구조로 인해 많은 컨버터 애플리케이션에서 사용된다. 그러나 듀티가 0.5를 초과하면, 서브 하모닉 발진이 전류에서 발생한다. 이러한 현상을 방지하기 위해 제어기를 안정적으로 동작 할 수 있도록 보상 기울기를 추가 한다. 그러나 기울기 보상의 방법은 구조를 복잡하게 만들고 출력 전압이 가변적 일 때 때때로 기울기를 변화시켜야 하는 문제가 있다. 따라서 본 논문에서는 기울기 보상 없이 새로운 하이브리드 모드 전류 제어 방법을 제안한다. 밸리 전류 모드에서 트레일 링 에지 변조를 사용하는 제안 된 방법에서, 서브 하모닉 발진 문제는 쉽게 해결 될 수 있다. 제안 된 제어기는 Psim 시뮬레이션에 의해 검증된다.