• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.2
• /
• pp.53-69
• /
• 2000

For the case of the capacity increase of Masan-Changwon wastewater treatment plant, the changes of near-field dilution rates due to the increased discharges into Masan Bay from the submerged multipart-diffuser were predicted by using CORMIX model. As the increase of wastewater discharges from currently 280,000 m3f day to 720,000 m3fday by 2011, the dilution rates become much lower than the present rates. To enhance the reduced dilution rates, the engineering design changes of diffuser length and alignment were considered as an optimal engineering option. According to the results of the model simulations for these changes, the dilution rates were increased in the strong ambient current of spring tide, but they were not affected by these changes in the weak current of neap tide in Masan Bay. From the analysis of oceanographic survey data, new outfalls sites have been searched. A promising outfalls site is selected and proposed on the basis of maximum obtainable dilution rates predicted by the model simulations.

• Journal of Korea Water Resources Association
• /
• v.33 no.2
• /
• pp.207-217
• /
• 2000

A numerical model is applied to analyze the mixing characteristics of an axisymmetric turbulent buoyant jet discharged into flowing stratified ambients. The numerical model is a Gaussian-vortex model which incorporates the effects of the vortex pair known as the representative characteristics of far-field in flowing ambients. Six ocean outfalls that have field data for the initial dilution at the water surface are selected for testing the applicability of the developed numerical model. The comparisons of the observed initial dilutions and the simulated ones show that the developed numerical model could be used for the analyses of the initial mixings induced by the sewage diffuser discharged into the ocean.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.3
• /
• pp.124-132
• /
• 2009

The optimal type and discharging position of ocean outfall of wastewater have been determined by hydrodynamic modeling, near-field dilution modeling, and far-field dispersion modeling. Tide and tidal currents have been simulated by a finite element hydrodynamic model showing good agreements with field observations. Based on the hydrodynamic simulation results candidates of ocean outfall position were preliminary determined. Submerged single port and submerged multi-port diffuser were selected as discharging system alternatives and finally designed by considering tide, tidal currents and water depth. Initial dilution of wastewater discharged from the designed ports has been estimated by CORMIX system. A 2-dimensional random-walk dispersion model has been employed to simulate far-field dispersion of discharged wastewater.

• Water for future
• /
• v.30 no.2
• /
• pp.16-19
• /
• 1997

• Proceedings of the Korea Water Resources Association Conference
• /
• 1998.05a
• /
• pp.505-511
• /
• 1998

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2000.09a
• /
• pp.126-132
• /
• 2000

하수처리장의 수중확산관에서 방류되는 부력제트는 초기혼합, 중력확장, 이송-확산 등의 과정이 시간적, 공간적으로 규모가 상이한 범위에서 일어나며, 하수방류 해역의 주변수 흐름은 지형특성과 조석의 영향을 받아 3차원적 비정상류 특성을 나타낸다. 이러한 부력제트의 거동을 모의하기 위해서는 일반적으로 근역과 원역을 분할하여 예측하는 방법을 사용하는데, 초기혼합 과정과 중력환장 과정을 예측하기 위해서는 정상상태는 가정한 특성길이 모형이나 제트적분 모형을 사용하고, 원역으로의 이송-확산 과정을 모의하기 위해서는 농도 모형이나 임자추적 모형등을 사용한다. (중략)

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.2
• /
• pp.116-126
• /
• 1999

In this paper, we have studied the seasonal vanatIons of near-field dilutions of wastewater discharged from the submerged mutiport-diffuser in Masan Bay. Seasonal changes of temperature and salinity, and tidal currents were measured at 16 stations in Masan Bay. Based on the observed ambient field data, the seasonal changes of near-field dilutions due to ambient current and density fields were calculated by CORMIX model. Because of the shallow ambient water depth of 15 m, the density profiles are isopycnal in autumn and winter seasons, in which the dilution factors were the highest, 168 with the strong spring-tidal current and 110-120 with the weak neap-tidal current. As the season changes from spring to summer, the dilution factors are considerably reduced by the factor of 2 as the thermocline is getting deepened up to Sm in depth in summer. In the case of a weak ambient current, the dilution factor in summer was reduced to 1/4 of the dilution in winter. However, with strong ambient current the difference between summer and winter dilutions becomes relatively small by 30%. The results indicate that the seasonal variation of near-field dilution is very large up to 4 times with a weak neap-tidal current, but its variations become small under a strong ambient current of spring tide in MasanBay.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.2
• /
• pp.60-69
• /
• 1999

In this paper, we have obtained the initial and near-field dilution rates of wastewaters discharged from the ocean outfall of Masan-Changwon municipal wastewater treatment plant from both of field measurements and CORMIX model simulations. In the summer of 1998, water temperature and salinity profiles was measured at 16 stations in the vicinity of the Masan outfall and the dilution rates were analyzed by salinity deficit method. The transport of the wastefields and their initial dilution rates were calculated by CORMIX model using field data as model input. Both of observed and predicted results are shown In very low dilutions with the range of 32～48 from the field data analysis and 29～43 from the model prediction, respectively. This indicates that the water quality in the Masan outfall area can be worsening due to the low dilution rates of diswastewaters, especially, when the ambient currents are very weak in a neap tide and ambient water density is highly stratified in summer.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.317-317
• /
• 2011

맨홀 및 관로에 퇴적되는 유사는 우수관거의 통수능을 감소기키고 우수관거 시스템의 효율을 저하시켜, 맨홀에서 역류를 발생시켜 저지대 침수의 한 원인인 되고 있다. 또한 관거내에서 유수가 일정한 유속을 확보하지 못하면 오염물이 침전되고, 관거내 유하시간이 길어져 침전물 부패로 인한 황화물질 및 악취 등이 발생할 수 있다. 따라서 우수 및 하수관거 시스템에서 유사와 관련된 주된 연구는 관거내의 유사거동 특성을 규명하고자 하는 것이었다. 그러나 맨홀과 관련하여서는 맨홀내의 오염물 지체시간 및 확산 특성분석이 전부였고, 유사의 퇴적 및 배출 등과 관련된 거동특성 연구는 매우 미흡한 실정이다. 본 연구에서는 유입관과 유출관이 $90^{\circ}$로 접합된 맨홀을 대상으로 수리실험을 실시하고, 맨홀형태(사각형, 원형), 유사유입형태(연속주입, 일정기간주입), 유사종류(주문진표준사, 모래), 유사유입량 및 맨홀내부형상 변화에 따른 맨홀내 유사퇴적량을 확인하였다. 실험결과 그림 1과 같이 $90^{\circ}$ 접합맨홀에서는 유사유입형태와 무관하게 유입유사량이 증가할수록 퇴적량 또한 증가하였다. 그러나 유사퇴적량은 사각형맨홀보다 원형맨홀에서 적었다. 이는 관거가 $90^{\circ}$로 접합된 맨홀내에서의 유사거동 양상은 우선 유입되는 유사가 맨홀바닦에 퇴적되고 와류에 의해 부유되는 유사가 유출관을 통해 배출되는데 사각형맨홀에 비하여 원형맨홀에서 와류가 더 크게 형성되기 때문인 것으로 판단된다. 유사가 일정기간주입되는 경우 원형맨홀 내부에 퇴적되는 유사량은 거의 없었다. 사각형맨홀내부에 벤칭을 설치한 경우 설치전과 비교하여 퇴적량은 50%이상 저감되었고, 일정기간주입시에는 벤칭 설치 후 유사퇴적량은 거의 없었다. 유입유사가 모래인 경우 맨홀내 퇴적량은 주문진표준사와 비교하여 증가하였다. 모래는 주문진 표준사와 비교하여 중량이 크다. 따라서 같은 흐름조건에서 주문진표준사와 비교하여 부유되는 유사량이 적고, 배출되는 유사량 또한 적었다. 유량과 관거유속이 동일한 조건에서 유출관과 유입관이 일직선상으로 연결된 중간맨홀내부에 퇴적된 주문진표준사의량과 비교하여 $90^{\circ}$ 접합맨홀의 퇴적량이 상대적으로 적었다. 이 또한 앞서 기술한 와류의 영향으로 판단된다. 일반적으로 $90^{\circ}$접합맨홀내부에서 발생하는 와류가 중간맨홀보다 크고, 이로 인해 에너지손실은 커지지만 유사거동과 관련하여서는 와류가 크게 발생하는 맨홀조건에서 퇴적량이 적음을 실험적으로 확인하였다.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.418-426
• /
• 1997

Dewatered digested sewage sludge were heated with microwave and their drying characteristics were investigated on the effect of their surface area, shape, diameter and thickness. The drying characteristics of identical samples in a conventional drying oven were studied. In conventional drying, constant rate period was not found and moisture was evaporated with capillary action. Moisture in the sludge was a bound water and free water was not exist. In microwave drying, the falling rate period was divided into two zones. In falling rate drying period, moisture movement occured by diffusion. The evaporation surface area was a significant variable, the greater heating surface area promoted water removal rate over wide region of water content. Drying rate was slow and constant rate drying period was found in wide moisture content region with increasing diameter. Drying characteristics appeared differently in various shape. In microwave heating, first of all temperature of sludge center was increased and was the highest. Temperature in the constant rate drying period was remained constantly at $80{\sim}100^{\circ}C$.