• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.1
• /
• pp.97-109
• /
• 2014

This study developed a functional dress shirt for adult males that reflected the body surface variation of a human body section by motion. This study conducted a 3D body scan for 8 subjects in their 40's based on the Size Korea 2010 database. Data recorded the proper posture change value and body surface change value to develop functional dress shirts for adult males. We scanned the subjects with a 3D body scanner for five primarily male wearing dress shirts and operating postures, right standing, arms raised to $90^{\circ}$ horizontal forward position, arms raised $90^{\circ}$ to the horizontal position side, lift up the arm $180^{\circ}$, and arm forward $90^{\circ}$ in a bent posture. We analyzed the 3D scan data from those motions to examine change of length using 3D software Rapidform XOS. The results indicated that the body surface sections with contraction were the front and rear shoulder area, armpit and central length as well the width of arms at more than 10%. The increased body section included the body and armpit back length; in addition, the rear arm vibration girth and under arm girth were more than 10%. In order to reflect the size variation of for each motion, the ease amount of the front and rear shoulder length and width needs to be reduced 20% because it affects the shoulder length during the right standing. The results suggest that the ease amount of the shoulder length should be minimal. The ease amount of the back size needs to be 0.5-2cm bigger and set 0.5-1.5cm longer than the dress shirt length side drooping to compensate for the side length shortage of each motion. The sleeve length needs to be 0-0.5cm shorter, and ease amount of the girth of sleeve bottom needs to be reduced 0-0.7cm due to the size variation of arms. However, the girth of the rear arms is suggested to be 0-0.6cm longer in the ease amount to the rear arm girth as the extension is more than 10% over the width and length of each motion.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.3
• /
• pp.143-147
• /
• 2017

To evaluate surface characteristics and improve crystalline quality of AlN single crystal grown by physical vapor transport (PVT) method, wet chemical etching process using $KOH/H_2O_2$ mixture in a low temperature condition and thermal annealing process was proceeded respectively. Conventional etching process using strong base etchant at a high temperature (above $300^{\circ}C$) had formed over etching phenomenon according to crystalline quality of materials. When it occurred to over etching phenomenon, it had a low reliability of dislocation density because it cannot show correct number of etch pits per estimated area. Therefore, it was proceeded to etching process in a low temperature (below $100^{\circ}C$) using $H_2O_2$ as an oxidizer in KOH aqueous solution and to be determined optimum etching condition and dislocation density via scanning electron microscope (SEM). For improving crystalline quality of AlN single crystal, thermal annealing process was proceeded. When compared with specimens as-prepared and as-annealed, full width at half maximum (FWHM) of the specimen as-annealed was decreased exponentially, and we analyzed the mechanism of this process via double crystal X-ray diffraction (DC-XRD).

• Trans-
• /
• v.4
• /
• pp.111-134
• /
• 2018

The purpose of this study is to understand the principles of Balletfit and its program structure and to establish Balletfit's effects on body shape change and postural correction. Interview, the most commonly used method of qualitative research, was chosen as the research method. Ten Balletfit class participants, who have attended private lessons twice per week, for three to six months period of time, were selected. These participants were chosen from participants of private lessons instead of group lessons for in-depth insights. The research was limited to a small group of participants and therefore, it is difficult to standardize the result. Also, because this study is based on the opinions of the participants, not by a posture measuring device, the accuracy of the result is limited as well. The followings are the conclusion of this research. First, the participation motive was either internet research or acquaintance's recommendation. Secondly, the effort to change the body shape. After experiencing Balletfit classes, the participants became aware of their body and made an effort to recover their posture by holding the stomach tight and sitting up correctly. Thirdly, their posture became ideal. Most participants became aware of what an ideal posture is and as their body became ideal, the participants also recovered their health by becoming aware of their inner and outer body. Lastly, they tend to prefer beautiful body line. After the experience, all participants became interested in the body line and preferred to build a beautiful body line with correct postures. The most significant effect of Balletfit was the body line. Therefore, the experience of Balletfit develops the inner and outer body awareness and also can be consider to effect the change of the body shape. Balletfit will become a satisfying exercise for modern people, who desire a beautiful, healthy body.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.11
• /
• pp.115-126
• /
• 2014

In order to improvement of the perceptive of health state and the motivation, this study suggests the ways and design forms which provide PHR information customizing individual attributes as well as guidelines through a decision support system and services which integrate medical information visualization. Expression methods using the color, form, position in order to visualization based on images improved performance of information awareness by changing radar chart from existing information which provide only numerical figure. The methods providing a graphic figure which seems like beads of blood which shows the result of blood tests would also arise patient's attention. They gives the patient's information which is able to compare their health status and normal status and visualizes the records as a human figure in order to perceiving their status as well. The visualization showing the position of human body figures marks in inspection elements located in position of relevant organs. The method also uses icons represent examination results so they improve attention of the results and shorten recognize times.

• Journal of the Korean Ceramic Society
• /
• v.34 no.9
• /
• pp.963-968
• /
• 1997

Coal tar pitch was used to study the effect of the pyrolysis conditions to produce mesophase pitch used as a matrix precursor for carbon/carbon composites. The pyrolysis conditions were presented in all cases that the total pressure was 1 atm and the first stage temperature was changed from 25$0^{\circ}C$ to 34$0^{\circ}C$ to remove the low molecular weight compounds in the pitch, and then, heated to 40$0^{\circ}C$ to form anisotropic mesophase as the second stage temperature. The first stage temperature was very affected to form resulting anisotropic mesophase pitch. The resulting mesophase pitches show a significantly increased anisotropic contents upto 30$0^{\circ}C$. However, the contents of mesophase were decreased above 30$0^{\circ}C$. It was the reason that the first stage temperature had been control the number of free radicals to react the aromatic compounds in the pitch to form high molecular weight compound. Therefore, the two stage pyrolysis method could be very effectively used to control various contents of anisotropic polyaromatic mesophase compared to continuous to continuous heating method.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.983-991
• /
• 2012

The purpose of this study was to provide basic reference data for the development of slim-fit dress shirts patterns for a variety of body somatotypes. For this study, a survey was conducted on the actual product conditions of slim-fit dress shirts of domestic brands(Actual wearing and purchasing conditions, fit, design preferences). The survey was conducted on 135 men in their 20s~30s. PASW Statistics 18 was used for data analysis. The result of this study are as follows : Analysis of the actual wearing conditions of dress shirts indicates that consumers own an average of 1~2 classic-fit shirts and 1~4 slim-fit shirts. These are normally worn once or twice a week, and purchased mainly at department stores, agencies, direct sales markets or outlets. With respect to the purchasing factors, price and style were the main priorities. Surveyed consumers had the greatest preference for designs with a non-darted front and a darted back, a semi-wide collar and the color white. By classifying the surveyed by somatotype, Type B preferred designs darted on both front and back, Type A preferred designs with a non-darted front and a darted back, while Type Y preferred designs non-darted on both front and back. All somatotypes displayed a preference for semi-wide collars and the color white.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.332-339
• /
• 2013

The network nodes in a tactical network moves continuously and due to the physical and electronic obstacles, the connections are not always available. Due to the frequent disconnections, it is hard to discover the path among the nodes in a DTN. According to PROPHET(Probabilistic Routing Protocol using History of Encounters and Transitivity), one of the most well-known DTN routing protocols, a DTN node determines whom to forward a packet according to the packet delivery probability. From the viewpoint of a node, the packet delivery probability of another node is degraded while the nodes are disconnected whereas it is improved when they encounter. In this paper, we enhance the algorithm estimating the packet probability by considering the encounter count as an additional parameter. Our algorithm prefers the node that encounters the destination more frequently in selecting the next hop toward the destination. We evaluated the performance of our algorithm by simulating military operations using a DTN-dedicated simulator. Through the simulations, we show that our proposed algorithm achieve higher packet delivery ratio with similar overhead compared with PROPHET.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.3
• /
• pp.11-17
• /
• 2007

RWe have developed an infrared temperature monitoring system to measure the temperature of hot iron plate in very harsh environmental conditions as iron making equipment. We performed extensive field test for 3 months at the front side of iron plate rolling process of POSCO in Gwang-Yang. From the experimental test, we have confirmed the reliability of the developed system. We adjust the curve fit method to solve the non-linearity equations of A2TPMI sensor, and establish the under $1[^{\circ}C]$precision ratio and 25[msec] process speed each range. As experimental, we have confirmed the reliability of an infrared temperature monitoring system as POSCO test result and CAN network traffic monitoring of polling method.

• Journal of the Korean Ceramic Society
• /
• v.33 no.12
• /
• pp.1387-1393
• /
• 1996

A study on mesophase pitch as a matrix precursor of carbon fiber reinforced carbon (C/C) composite has been recently presented. This study is concerned with the production of mesophase pitch as matrix precursors for C/C composite from coal tar pitch. A commercial coal tar pitch was heat-treated at 25$0^{\circ}C$ for 2 hours to remove low molecular weight fraction from the pitch then increasing the temperature of the pitch to between 350~45$0^{\circ}C$ to produce mesophase pitch. The pitch was continuously stirred during this time and nitrogen gas was continuously bubbled through the pitch. Spherical and bulk mesophases were formed in the pitch after heat-treatment,. Parent and mesophae pitches were characterized by elemental analysis coke yield solubi-lity in tetrahydrofuran and hexane and an optical microscopy to measure the mesiophase content. It was neces-sary to produce C/C composite that a mesophase pitch with about 30-40 vol% mesophase spherulites can be infiltrated into a fiber preform without a filter effect as a matrix precursor conditions. This condition was satisfied with mesophase pitch heat treated at 40$0^{\circ}C$ for 2 hours. The other heat treatment conditions showed the nuclei of mesophase or bulk mesophae which were not satisfied with the matix precursor condition.

• Journal of the Korean Ceramic Society
• /
• v.35 no.7
• /
• pp.740-748
• /
• 1998

The inertia friction properties of C/C composites manufactured by the processes of pressure and at-mospheric carbonizaton with a commerciallized and two kinds of modified coal-tar pitch as a matrix pre-cursor were investigated. The modifications of a pitch such as the introduction of mesophase and the ad-dition of sulphur into a raw pitch were not effective for a impregnation efficiency conducted in a vacuum and at the same time in a pressure of 5kg/cm2 due to the increase of the pitch viscosity. There was not a difference in the densification increment between the pitch modifications however it was revealed that a pressure carbonization was more advantageous than an atmospheric in the densification and the formation of anisotropic carbon matrix. The friction and wear propertis of C/C having higher degree of matrix cry-stallization higher density and hardness of friction surface showed superiority. As the braking energy was increased the friction coefficients were decreased and reached almost same level at the high kinetic energy of 99.6kJ. The wear trends at 99.6kJ were different from the behaviors of friction ceofficient under the same energy in which an oxidation wear is being considered along with a mechnical wear although the wear rates were almost similar to the friction coefficient at the low energy.