• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.11a
• /
• pp.29-29
• /
• 1997

각광 받는 구조재료인 섬유강화 복합적층재에 대한 기계적 체결 거동은 본질적인 재료의 이방성에 의해서 파단강도가 파단 모우드와 매우 밀접한 관련을 갖는 것으로 알려져 있다. 따라서, 복합적층판 체결부의 정밀 구조 설계에서는 단순화에 따른 오차를 줄이고 정밀해에 의한 설계 및 해석이 요청된다. 특히, 층간응력 성분을 무시할 수 없는 두께를 갖는 복합적층 판의 기계적 체결부 해석이나 실제 구조물의 체결부에서 발생하는 굽힘이나 비틀림과 같은 하중 상태를 묘사하기 위해서도 정밀한 3차원 응력 해석은 필요하다. 하지만, 지금까지 기계적 체결부의 거동에 관한 연구는 층간응력 성분들을 어느정도 무시할 수 있는 얇은 평판에 대한 2차원 응력해석에 주로 국한되어 왔으며, 일부 수행된 체결부에 대한 3차원 응력 해석의 경우 여러 단점을 갖는 3차원 연속체 요소에 의한 유한요소 해석이 수행되었을 뿐이다.본 연구는 층간응력 성분들을 무시할 수 없는 두께를 갖는 복합적층판의 기계적 체결부 해석에 지금까지 사용되어온 3차원 연속체 요소에 의한 유한요소 방법이 갖는 단점들을 개선한 Layerwise 유한요소법을 이용하여 3차원 응력해석을 수행하였다. 특히, 선형상보성원리에 근거한 최적설계 기법을 응용하여, 기계적 체결시 핀과 적층판의 홀 사이에 발생하는 하중 전달 과정을 모사하고, 접촉력에 의한 홀 주위의 복잡하고 국부적인 응력 집중현상을 규명하여본다.

• Transactions of Materials Processing
• /
• v.23 no.3
• /
• pp.164-170
• /
• 2014

To predict the deformation and fracture during tube expansion using the finite element (FE) method, a material model is considered that incorporates the damage evolution due to the deformation. In the current study, a Rice-Tracey model was used as the damage model with inclusion of the hydrostatic stress term. Since OFHC Cu is not significantly affected by strain rate, a Hollomon flow stress model was used. The material parameters in each model were obtained by using an optimization method. The objective function was defined as the difference between the experimental measurements and FE simulation results. The parameters were determined by minimizing the objective function. To verify the validity of the FE modeling, cross-verification was conducted through a tube expansion test. The simulation results show reasonable agreement with the experiments. The design for a minimum diameter of expansion tube using the FE modeling was verified by a simplified tube expansion test and simulation results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.53-61
• /
• 2015

This paper presented the nonlinear behaviors of the single-layered lattice dome, which is widely used for the long-span structure system. The behaviors were analysed through the classical shell buckling theory as the single-layered lattice dome behaves like continum thin shell due to its geometric characteristics, and finite element analysis method using the software program Nastran. Shell buckling theory provides two types of buckling loads, the global- and member buckling, and finite element analysis provides the ultimate load of geometric nonlinear analysis as well as the buckling load of Eigen value solution. Two types of models for the lattice dome were analysed, that is rigid- and pin-jointed structure. Buckling load using the shell buckling theory for each type of lattice dome, governed by the minimum value of global buckling or member buckling load, resulted better estimation than the buckling load with Eigen value analysis. And it is useful to predict the buckling pattern, that is global buckling or member buckling.

• Journal of the Korean Chemical Society
• /
• v.59 no.1
• /
• pp.36-44
• /
• 2015

This article describes synthesis and electrochemical properties of layer-by-layer self-assembled multilayer film composed of polyaniline (PANi), graphene oxide (GO) and phytic acid (PA), whereby the GO was electrochemically reduced to ERGO, resulting in $(PANi/ERGO/PANi/PA)_{10}$ film electrode. Especially, we examined the possibility to improve the volumetric capacitive property of $(PANi/ERGO)_{20}$ film electrode via combining a spherical hexakisphosphate PA nanoparticle into the multilayer film that would dope PANi properly and also increase the porosity and surface area of the electrode. The electrochemical performances of the multilayer film electrodes were investigated using a three-electrode configuration in 1 M $H_2SO_4$ electrolyte. As a result, the $(PANi/ERGO)_{20}$ electrode showed the volumetric capacitance of $666F/cm^3$ at a current density of $1A/cm^3$, which was improved to the volumetric capacitance of $769F/cm^3$ for the $(PANi/ERGO/PANi/PA)_{10}$ electrode, in addition to the cycling stability maintained to 79.3% of initial capacitance after 1000 cycles. Thus, the electrochemical characteristics of the $(PANi/ERGO)_{20}$ electrode, which was densely packed by ${\pi}-{\pi}$ stacking between the electron-rich conjugate components, could have been improved through structural modification of the multilayer film via combining a spherical hexakisphosphate PA nanoparticle into the multilayer film.

• Microbiology and Biotechnology Letters
• /
• v.41 no.2
• /
• pp.236-241
• /
• 2013

Pilocarpine is an imidazole alkaloid, found exclusively in the Pilocarpus genus, with huge pharmaceutical importance. In order to extract pilocarpine from Pilocarpus jaborandi, environmentally friendly enzyme-assisted extraction was applied. Viscozyme$^{(R)}$ L, a commercially available enzyme cocktail, was used for the study. The conditions for extraction were optimized on the basis of substrates, enzymes, temperatures and pHs. Optimum conditions for extraction with the highest yield were 30 h reaction of 100 mg substance at $45^{\circ}C$ in 40 ml of 50 mM acetic acid, pH 4. A 10% enzyme concentration was found to be the best for extraction. Total pilocarpine content after extraction was analyzed by HPLC. The total pilocarpine content ($1.14{\mu}g/mg$) obtained from Viscozyme$^{(R)}$ L treatment was 3.08-fold greater than those of the control treatment ($0.37{\mu}g/mg$).

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.255-259
• /
• 2022

Solar membrane steam generation is a very promising technology that can harvest purified water from seawater or wastewater during the current danger of running out of pure water. However, solar Membrane steam generation had direct contact with water, making it difficult to increase the efficient amount of evaporation. Here, we propose solar membrane steam generator composed of polydimethylsiloxane (PDMS) and graphene oxide (GO) and improved evaporation through wettability control in part throughout the water-absorbing membrane. Wettability control has shown significant improvements in thermal localization and temperature rise in the area of heat exchange with sunlight. The evaporator has an evaporation rate of 1.54 kg m^-2 h^-1 under 1 sun irradiation. The results showed that Solar membrane steam evaporation can effectively harvest pure water through an increase in evaporation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.252-256
• /
• 2015

Nitrogen oxides ($NO_X$) was emitted from flue gas of stationary sources and exhaust gas of mobile sources, can leads to various environments problems. Selective Catalysts Reduction (SCR) is the most effective $NO_X$ removal system. Commercial $V_2O_5-WO_3/TiO_2$ catalysts, usually containing $V_2O_5$ 0.5~3 wt%, $WO_3$ 5~10 wt%, and $V_2O_5$ is active in the reduction of $NO_X$ but also in the desired oxidation of $SO_2$ to $SO_3$. To reduce the amount of vanadium, using graphene matrix supported vanadium to synthesize nanocomposite. Then, we fabricated to 1 inch honeycomb type of SCR catalysts adding graphene-vanadium nanocomposite. The chemical-physical characteristics and the catalytic activity were performed by XRD, XRF, BET and Micro-Reactor (MR). As a result, the De-NOX performance was showed, similar to the commercial catalyst activity as 77.8 % and using nanocomposite catalyst as 77.1 % at $350^{\circ}C$.

• Membrane Journal
• /
• v.31 no.1
• /
• pp.16-34
• /
• 2021

Water supplies are decreasing in comparison to increasing clean water demands. Using nanofiltration is one of the most effective and economical methods to meet the need for clean water. Common methods for desalination are reverse osmosis and nanofiltration. However, pristine membranes lack the essential features which are, stability, economic efficiency, antibacterial and antifouling performances. To enhance the properties of the pristine membranes, graphene oxide (GO) is a promising and widely researched material for thin film composites (TFC) membrane due to their characteristics that help improve the hydrophilicity and anti-fouling properties. Modification of the membrane can be done on different layers. The thin film composite membranes are composed of three different layers, the top filtering active thin polyamide (PA) layer, supporting porous layer, and supporting fabric. Forward osmosis (FO) process is yet another energy efficient desalination process, but its efficiency is affected due to biofouling. Incorporation of GO enhance antibacterial properties leading to reduction of biofilm formation on the membrane surface. Pressure retarded osmosis (PRO) is an excellent process to generate clean energy from sea water and the biofouling of membrane is reduced by introduction of GO into the active layer of the TFC membrane. Different modifications on the membranes are being researched, each modification with its own advantages and disadvantages. In this review, modifications of nanofiltration membranes and their composites, characterization, and performances are discussed.

• Journal of Adhesion and Interface
• /
• v.24 no.3
• /
• pp.100-104
• /
• 2023

Van der Waals heterostructures have garnered significant attention in recent research due to their excellent electronic characteristics arising from the absence of dangling bonds and the exclusive reliance on Van der Waals forces for interlayer coupling. However, most studies have been confined to fundamental research employing the Scotch tape (mechanical exfoliation) method. We fabricated Van der Waals vertical heterojunction transistors to advance this field using materials exclusively grown via chemical vapor deposition (CVD). CVDgrown graphene was patterned through photolithography to serve as electrodes, while CVD-grown MoSe₂ was employed as the pickup/transfer material, resulting in the realization of Van der Waals heterojunction transistors with interlayer charge transfer effects. The electrical characteristics of the fabricated devices were thoroughly examined. Additionally, we observed variations in the transistor's performance based on the presence of defects in MoSe₂ layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.352.1-352.1
• /
• 2016

양자점은 나노미터 크기의 반도체 결정으로 밴드갭에 따라 광학적, 전기적 성질이 달라지는 독특한 성질을 가지는 형광물질으로 활발히 연구되고 있다. 중금속을 기반으로 한 양자점은 높은 발광효율과 광안전성을 가지며, 가시광선 영역에서 빛을 내는 특징을 가지고 있다. 그러나 중금속을 사용하기 때문에 독성이 있어 인체나 환경에 유해하여 응용 연구에 제한적이다. 반면에, 탄소 기반의 양자점은 중금속 기반의 양자점과 비슷한 성질을 가질 뿐만 아니라, 높은 용해도와 낮은 독성으로 인해 생체적합성이 높다는 장점이 있다. 이를 이용하여 발광다이오드(LEDs), 태양전지, 광촉매 뿐만 아니라 바이오이미징, 바이오센서 등 생물학분야에도 응용 될 수 있다. 본 연구에서는 Bottom-up 합성 방법으로 유기전구체를 이용하여 질소를 함유하고 있는 양친매성 탄소 양자점(N-GQDs)을 합성하였다. 합성에 사용한 유기전구체는 기존에 보고된 유기전구체와 다르게 반응 진행 중에도 pH 측정 결과 중성을 나타내며, 반응 온도($225^{\circ}C$)와 유사한 온도에서도 pH 값은 여전히 6.0 이상의 값을 나타냈다. 중성을 띄는 특징으로 인해 추가적인 산제거 과정이나 표면안정화 과정이 필요 없다는 장점을 가지고 있다. 합성된 N-GQDs는 높은 결정성의 원형구조를 가지며, 원자힘현미경(AFM) 분석을 통해 높이가 ~ 1.5 nm 미만으로 3층 이하의 두께로 형성되었음을 확인하였다. 또한, 적외선 분광법(FT-IR) 분석을 통해 O-H기, 방향족 고리의 C = C (또는 C = N)기 및 C-N기가 각각 ~3250, ~1670과 ~1140 cm-1에서 확인할 수 있다. 합성된 양자점을 유기태양전지의 active layer에 소량(2 wt%) 첨가하여 양자점의 광학적, 전기적 성질을 확인하였다. 비교군 유기태양전지보다 N-GQDs가 첨가된 유기태양전지의 외부양자효율(PCE)이 7.3%에서 8.4%로 약 20%가 증가하는 것을 보였다. 이는 양자점이 상대적으로 흡수가 약한 단파장 영역의 빛을 흡수하고 PL을 내어 active layer로 에너지 트랜스퍼 현상이 일어나 전자전달을 원활하게 해 주기 때문이다. 앞으로 본 연구의 가능성과 추가적인 연구를 통해 더 많은 분야에 응용되기를 기대한다.