• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.1
• /
• pp.37-46
• /
• 2003

The transient responses on arbitrarily interconnected digital transmission lines are analyzed by an efficient node discretization technique. Since the proposed node discretization technique offers an efficient means to discretize transmission lines, the transient waveform at any position on the arbitrarily interconnected lines is easily predicted. Dispersive microstrip multiconductor transmission lines arbitrarily connected are analized for generality. The derivation of frequency-dependent equivalent circuit elements of coupled transmission lines have been carried out by the spectral domain approach(SDA). The effects of variations of excited pulse width on the crosstalks of the high-speed microstrip coupled-lines are also investigated. It has been well known that the crosstalk spike level is monotonously increased when the coupling length and effective permittivity of substrate are increased. In this paper, it is found that the variations of crosstalk level are not further monotonous as shortening the exciting pulse width toward several picosecond. The results are verified by the generalized S-parameter technique.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1405-1406
• /
• 2015

본 논문에서는 비교적 가격이 저렴하면서 전자기장의 영향을 적게 받는 광학 소자를 이용하여 각도를 측정하는 연구에 대해 다루고 있다. 보다 측정 범위를 넓히기 위해 빛을 수광하는 포토트랜지스터를 3개 사용하였고, 발광부의 빛을 효과적으로 전달하기 위해 광섬유를 사용하였으며, 이 광섬유의 끝을 여러 각도로 가공하였다. 그 결과 포토트랜지스터를 1개 사용한 경우보다 측정 범위가 넓어지고, 광섬유의 끝을 가공함으로써 측정 신호의 비대칭성과 피크점이 이동하는 것을 확인하였다. 본 연구는 각도 측정을 요하는 다양한 분야에서 활용될 수 있는 측정 기술에 기반이 될 것으로 판단된다.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.3
• /
• pp.5-13
• /
• 1992

Taking devantage of the property that Korean digit is a mono-syllable word, we proposed a spoken Korean-digit recognition scheme using the multi-layer perceptron. The spoken Korean-digit is divided into three segments (initial sound, medial vowel, and final consonant) based on the voice starting / ending points and a peak point in the middle of vowel sound. The feature vectors such as cepstrum, reflection coefficients, ${\Delta}$cepstrum and ${\Delta}$energy are extracted from each segment. It has been shown that cepstrum, as an input vector to the neural network, gives higher recognition rate than reflection coefficients. Regression coefficients of cepstrum did not affect as much as we expected on the recognition rate. That is because, it is believed, we extracted features from the selected stationary segments of the input speech signal. With 150 ceptral coefficients obtained from each spoken digit, we achieved correct recognition rate of 97.8%.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.392-398
• /
• 2005

Self-assembled multilayer thin films of poly(ethylene-alt-maleic anhydride) (PEMAh) and poly(4-vinyl pyridine) (P4VP) were fabricated by layer-by-layer (LbL) sequential adsorption. Fourier transform infrared (FT-IR) spectroscopic analysis of the self-assembled PEMAh/P4VP multilayer films confirms that the driving forces for the multilayer buildup are the intermolecular hydrogen bonding and electrostatic interactions. The linear increase of absorption peak of P4VP at 256 nm with increasing number of PEMAh/P4VP bilayers indicates that the multilayer buildup is an uniform assembling process. We also investigate the effects of polyelectrolyte concenhation variation of the dipping solution and pH variation of the PEMAh solution on the multilayer film formation. Thickness. adsorbed polyelectrolyte mass and surface roughness of the multilayer films were measured by UV-visible spectroscopy, quartz crystal microbalance (QCM), and atomic force microscopy (AFM), respectively.

• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.999-1004
• /
• 1998

$SrAl_2O_4$:$Eu^{2+}, Dy^{3+}$ 축광성 형광체의 합성에 있어서 $B_2O_3$는 일반적으로 고상반응의 촉진을 위한 플럭스로서 첨가된다. 본 연구에서는 플럭스로 첨가되는 $B_2O_3$가 $SrAl_2O_4$:$Eu^{2+}, Dy^{3+}$ 형광체의 결정구조 및 잔광 특성에 미치는 영향을 조사하였다. 합성된 $SrAl_2O_4$:$Eu^{2+}, Dy^{3+}$ 형광체는 520nm에서 최대 피크를 갖는 폭넓은 발광 스펙트럼을 나타내었고, $B_2O_3$ 첨가량의 5wt%일 때 최대값을 나타내었다. $B_2O_3$의 첨가에 의해 $SrAl_2O_4$:$Eu^{2+}, Dy^{3+}$ 결정 내부에는 균일 변형(uniform strain)이 발생하였고 이 결과로 결정격자의 a축과 c축의 길이 및 $\beta$각이 감소하여다. 그리고 $SrAl_2O_4$ 결정내부의 균일 변형은 $Eu^{2+}$이온의 여기과정에서 발생하는 정공(hole)의 포획 사이트인 음이온 결함(negative defect)을 다량 발생시키는 원인이 되고, 결과적으로 $SrAl_2O_4$:$Eu^{2+}, Dy^{3+}$ 결정의 잔광 특성을 향상시키는 것으로 생각되었다.

• Korean Journal of Materials Research
• /
• v.9 no.8
• /
• pp.849-853
• /
• 1999

In the study, superconducting properties of $Bi_2$-x(sub)$LSr_2$Ca(sub)1+x(sub)$LCu_2$O(sub)8+d (x(sub)L=0, 0.05, 0.1, 0.2) films prepared by the LPE method was investigated. The peak decompositions of Sr3d and Ca2p XPS spectra, together with the EPMA results, elucidated the occupancies of Bi, Sr and Ca atoms on the SrO- and Ca-layers. The lattice parameter c monotonically increased with increasing x(sub)L for $0\leq$x(sub)L$\leq$0.2. The superconducting critical temperature T(sub)c showed a maximum value around x(sub)L=0.1. The x(sub)L dependence of the superconducting critical temperature T(sub)c and the lattice parameter c are explained by the changes of the excess oxygens in the BiO-layer. Since distribution and deficiency of the atoms in SrO-layer have influenced on superconducting properties and crystal structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.3
• /
• pp.165-169
• /
• 2002

Silicon wafer is very important accuracy make use semiconductor device substrate. In this research, for the uniformity dopant density distribution obtained to Neutron Transmutation Doping on make use Si in P Doping study work. In this research. we irradiated neutron on FZ silicon wafers which had high resistivity (1000~2000 ${\Omega}$cm), HANARO reactor was utilized resistivity changes due to observed, the generation of neutron irradiation on point defect analyzed, point defect on resistivity changes inquire into the effect. Before neutron irradiation theoretical due to calculated 5 ${\Omega}$-cm, 20.1 ${\Omega}$-cm for HTS hole and 5 ${\Omega}$-cm, 26.5 ${\Omega}$-cm, 32.5 ${\Omega}$-cm for IP3 hole. After neutron irradiation through SRP measurement the designed resistivities were approached, which were 2.1 H-cm for HTS-1, 7.21 ${\Omega}$-cm for HTS-2, 1.79 ${\Omega}$-cm for IP-1, 6.83 ${\Omega}$-cm for IP-2, 9.23 ${\Omega}$-cm for IP-3, respectively. Also after neutron irradiation resistivity changes due to thermal neutron dependent irradiation hole types free.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.2
• /
• pp.139-148
• /
• 2001

Phenomena induced by waves, such as overtopping, sediment transport, vibration/fluctuation and destruction of structures are highly influenced by the directionality of wave propagation. These phenomena are often dominated by non-linearity, and so hydraulic model experiments are widely adopted for stability analysis rather than numerical modeling, Thus, stability ofrubblc mound breakwaters(RMB) due to wavc directionality was experimentally investigated in this study. The incident wave angle $30^{\circ}$ was found more risky on the damage rate of RMB under directional regular waves, and the incident wave angle $40^{\circ}$ was found relatively risky under directional irregular waves. These results clarified the wave directionality effect on the stability ofRMB, These facts were found correspondent to the occurrence of the peak between $20^{\circ}$-$40^{\circ}$ with the directional frequency distribution of lIlO maximum water particle velocity.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.2
• /
• pp.100-109
• /
• 1999

A method is proposed to characterize single-fiber composite interphases from the frequency-domain characteristics of scattered ultrasonic waves, and its feasibility is investigated theoretically. It has been shown that the locations and magnitudes of the peaks and valleys in the frequency domain are affected significantly by the interphase properties, which may indicate the effectiveness of the proposed method. Although the frequency-domain behavior is basically associated with the resonance of the fiber-interphase system, it is not dominantly affected by the scatterer's resonance unlike that in the case of acoustic wave scattering. Therefore, the conventional acoustic resonant scattering theory is not directly applicable to the characterization of composite interphases. In order to solve the inverse problem of predicting the interphase properties from the frequency-domain characteristics of the ultrasonic scattered waves, an artificial neural network has been constructed. This approach has demonstrated reasonable accuracy in most cases considered in this study.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.5
• /
• pp.410-418
• /
• 2009

Based on a linear potential theory, the boundary element method(BEM) is developed and applied to analyze the hydrodynamic forces and the motion responses of a floating body with a partially reflective sidewall. The hydrodynamic forces (added mass and damping coefficients) are dependent on not only the submergence of a floating body and the reflection of a sidewall, but also the gap between body and sidewall. In particular, the partial reflection of a sidewall plays an importance role in the motion responses of a floating body at resonant frequencies. It reduces the resonant peaks caused by resonance phenomenon due to the wave trapping in an enclosed fluid domain between body and sidewall. Developed predictive tools can be used to assess the motion performance of a floating body for various combinations of configuration of a floating body, wave heading, sidewall properties, and wave characteristics and applied to supply the basic informations for the harbour design considering the motion characteristics of a moored ship.