• Journal of the Korean Solar Energy Society
• /
• v.31 no.4
• /
• pp.1-8
• /
• 2011

In this paper, inverse building modeling was applied to building perimeter zones which have different window orientation. Two test zones of east-facing and west-facing zones in ERS(Energy Resource Station) building, which is representative of small commercial building, was used to test performance of cooling load calculation and peak cooling load reduction. The dynamic thermal load model for the east and west zone was validated using measured data for the zones and then it was used to investigate the effect of peak cooling load reduction by adjustment of indoor cooling temperature set points during on-peak time period. For the east zone, the peak load can be reduced to about 60% of the peak load for conventional control even without any precooling. For the west zone, PLR is nearly independent of the start of the on-peak period until a start time of 1pm. Furthermore, PLR has a small dependence on the precooling duration. Without any precooling, the peak cooling load can be reduced to about 35% of the peak load associated with conventional control.

• The Magazine for Energy Service Companies
• /
• s.54
• /
• pp.64-69
• /
• 2008

야간의 잉여전력으로 열을 저장해두었다 주간에 이용하는 축열공조에는 50여년에 걸친 긴 역사가 있었다. 이 방식이 가지는 효용에 일찍부터 눈뜬 선각자들의 노력에도 불구하고 당초 보급은 늦어져 그다지 진전이 없었다고 한다. 이러한 정세가 일변한 것은 전력공급에 병목현상이 생겨 부하 평준화가 안정공급에 있어 필요불가결의 과제가 되었기 때문이다. 특히 공조는 피크성이 강한 수요이므로 공조용 전력을 야간으로 옮기는 작업의 이점이 큰 것은 당연하다. 비 수요시간대의 요금이 큰 폭으로 떨어짐으로써 수요자측에서 보아도 야간의 전력을 어떻게 활용할까하는 것은 매력적인 연구테마였다. 이리하여 축열공조가 관심을 불러 보급이 기도에 놓인 지 2O년 가까이 되었다. 처음에는 물을 사용한 축열이 대부분이었으나, 축열조 용량의 제약으로 얼음을 만들어 저장하는 빙축열방식이 도입되어 현재의 표준적인 축열방식이되었다. 그러나 빙축열에도 비용상의 문제가 있어 전면적인 보급에 이르기까지는 아직 연구의 여지가 더 남아있는 듯하다. 한편, 교토의정서의 발효 등에 의해 지구환경에 대한 관심이 높아지게 되었다. 이 같은 배경 속에 건물및 건축설비의 에너지절약 기술의 중요성이 대두되고, 특히 창 주변의 공조방식, 조광제어, 축열 공조시스템 등, 건물부하의 직접적인 저감과 전력부하 평준화에 의한 환경부하저감 및 운영비용의 저감을 목적으로 한 건물일체형 설비시스템을 적극적으로 도입하기에 이르렀다. 환경을 배려한 건축구조.설비시스템의 채택 사례가 증가하며 건축물 종합환경성능 평가시스템과 성능검증 등 건물설비의 평가.검증 수법도 연구되어 건물에 적합한 운용면에서의 사고가 중요함이 인식되었다. 이와 같이 건축구조와 설비시스템의 양면에서 에너지절약성 및 환경성, 쾌적성, 편리성의 추구가 적극적으로 도입되는 가운데, 슬래브축열시스템은 건축구조와 공조설비가 균형있게 융합됨으로써 초기비용의 삭감과 부하 평준화에 의한 경제성 향상, 복사에의한 실내환경의 향상 등의 효과를 기대할 수있는 시스템으로 추목받고 있다.

• Environmental and Resource Economics Review
• /
• v.17 no.2
• /
• pp.213-233
• /
• 2008

In this paper, we estimate the effects of the two most important means of summer time demand side management in Korean power market: adjustment of vacation or repair timing and the voluntary saving program. We use regression analyses to estimate how effective these two programs are in reducing the peak time demand during the summer. Our results show that adjustment of vacation or repair timing actually reduces the daily peak demand by 0.53 kWh per one kWh reported reduction calculated from the agreements between Kepco and the users. The voluntary saving program reduces the daily peak by 0.57 kWh per one kWh reported reduction calculated from the agreements between Kepco and the users. However, when we include these two effects in the same regression model, their respective estimated effects become much weaker.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.465-467
• /
• 2014

본 논문에서는 전기자동차 충전기용 스마트 분전반과 그 제어방법을 제안한다. 제안한 시스템은 평상시에 완속충전기에 전력을 공급하고, 충전요금이 저렴한 경부하시간대에는 스마트 분전반 내의 배터리에 전력을 충전한다. 하지만 완속충전기가 연결된 전원선 중 어느 한 상의 전력소비가 상대적으로 커지거나 피크부하 시 또는 정전 시에는 배터리로부터 전력을 계통에 공급한다. 이렇게 하면 계통으로부터 공급받는 전력량이 감소되어 피크부하 값이 저감될 뿐만 아니라 전원설비의 이용률과 전력품질이 개선되는 이점이 있다. 본 논문에서는 시뮬레이션을 수행하여 제안한 시스템의 유용성을 확인한다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.109-111
• /
• 2020

본 논문에서는 ESS용 전류원 Dual-Active-Bridge 컨버터의 저 부하 및 고 부하에서의 효율 향상을 위한 하이브리드 스위칭 알고리즘을 제안하고자 한다. 전류원 DAB 컨버터는 인터리브 구조를 이용하여 배터리 단의 입력 전류 리플을 저감할 수 있고, 전력 변환 효율 개선을 위한 다양한 제어 변수를 도입할 수 있는 등의 장점으로 인해 DC 마이크로그리드에서 ESS용 절연형 양방향 DC/DC 컨버터로 주목받고 있다. 그러나 전류원 DAB에서 종래의 전력 제어 방법인 펄스폭 변조 방식과 위상천이가 결합된 방법 (PWM plus Phase Shift, PPS)의 경우 저 부하 조건에서 높은 피크 전류로 인해 도통 손실이 크며, 펄스폭 변조 방식과 이중 위상천이가 결합된 방법(PWM plus Dual Phase Shift, PPDPS)의 경우 고 부하 조건에서 영전압 스위치 영역이 좁아져 효과적이지 않다. 따라서 본 논문에서는 2차 측의 펄스폭과 위상천이를 독립적으로 제어하는 하이브리드 스위칭 알고리즘을 통해 순환전류를 감소시키고 영전압 스위치 영역을 확장시켜 저 부하 및 고 부하 모두에서 효율을 향상시키고자 한다. 1-kW급 전류원 DAB 컨버터 시작품을 통해 제안된 하이브리드 스위칭 알고리즘의 효율성과 타당성을 검증한다.

• Journal of Convergence for Information Technology
• /
• v.9 no.1
• /
• pp.54-60
• /
• 2019

The recent climate change is exacerbating the external thermal environment and increasing the amount of energy used in building. Energy Plus was used to evaluate low energy technology performance of buildings responding to climate change. The test types of basic building(control) and evaporative mist system + basic building(EMS), and the analysis results of each type are compared. Energy performance evaluation result, Cooling peak load were EMS reduction compared to control is about 9%. Annual cooling load per unit area were EMS reduction compared to control is about 17%. Annual energy use per unit area were EMS reduction compared to control is about 10%. Therefore, the effect of the evaporative cooling system is considered to be good through energy reduction technology of building, according to the amount and distance of the evaporative mist system in the future research on building energy performance evaluation should be carried out.

• Korean Journal of Environment and Ecology
• /
• v.29 no.6
• /
• pp.936-946
• /
• 2015

This study is aimed to analyze the reduction performance of building energy consumption according to planting base types of panel-type green walls which can be applied to existing buildings. The performance was compared to the general performance of green walls that have demonstrated effects of improving the thermal environment and reducing building energy consumption in urban areas. The number of planting base types was 4 in total, and simulations were conducted to analyze the thermal conductivity, thermal transmittance, and overall building energy consumption rate of each planting base type. The highest thermal conductivity by the planting base type was Case C (0.053W/mK), followed by Case B (0.1W/mK) and Case D (0.17W/mK). According to the results of energy simulation, the most significant reduction of cooling peak load per unit area was Case C (1.19%), followed by Case B (1.14%) and Case D (1.01%) when compared to Case A to which green wall was not applied; and the most significant reduction of heating peak load per unit area was estimated to be Case C (2.38%), followed by Case B (1.82%) and case D (1.50%) when compared to Case A. The amount of yearly cooling and heating energy use per unit area showed 3.04~3.22% of reduction rate. The amount of the 1st energy use showed 5,844 kWh/yr of decrease on average for other types when compared to Case A. The amount of yearly $CO_2$ emission showed 996kg of decrease on average when compared to Case A to which the green wall was not applied. According to the results of energy performance evaluation by planting location, the most efficient energy performance was eastward followed by westward, southward and northward. According to the results of energy performance evaluation by planting location by green wall ratio, it was found that as the ratio of green wall increased, the energy performance displayed better results, showing approx. double reduction rate in energy consumption at 100% of green wall ratio than the reduction rate at 20% to 80% of green wall ratio.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.2
• /
• pp.141-146
• /
• 2014

This paper suggests a way of generating one-day load curves for performance improvement of peak shaving in a power system. This Peak Shaving algorithm is a long-term scheduling algorithm of PMS (Power Management System) for BESS (Battery Energy Storage System). The main purpose of a PMS is to manage the input and output power from battery modules placed in a power system. Generally, when a Peak Shaving algorithm is used, a difference occurs between predict load curves and real load curves. This paper suggests a way of minimizing the difference by making predict load curves that consider weekly normalization and seasonal load characteristics for smooth energy charging and discharging.

• Smart Media Journal
• /
• v.7 no.2
• /
• pp.71-77
• /
• 2018

This paper proposes the components of the energy management system (EMS) for optimum operation of renewable energy and associated energy storage system (ESS), the functions to be considered in designing, the analysis of operational effects, and finally the reduction of electricity costs. To accomplish the objectives, a lithium-ion battery system and an energy management system have installed in a PV system, and it presents the results analyzed with operation data for a year. To increase the system operation efficiency, we propose the effect that EMS is used to replace the demand power at the peak time with the charge power at the light load time, which suggests the influence of contributing to the charge benefit and load leveling according to the ESS tariff.

• Journal of Energy Engineering
• /
• v.16 no.4
• /
• pp.164-169
• /
• 2007

The decrease in the summer peak electric load in our country is very important. The government has arranged and implemented a lot of support policies and statutes to decrease the peak electric load. And the ice-thermal-energy-storage system is known as one of the alternatives. The purpose of this paper is to evaluate the performance and the total efficiency of its storage tank, conducting the charging operation, the parallel operation and the single operation of a storage tank. The thermal energy density stored and discharging efficiency of a storage tank and the efficiency of total energy utilization of system are $18.4\;USRT-h/m^3$, 96.2% and 2028.7 kcal/kWh under the operation of design condition. When the storage tank is supplied more ice thermal energy than design condition, it is estimated that the efficiency of system are lower than the design condition by the supercooled effect.