• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.375.2-375
• /
• 2002

This paper describes the emotion recognition algorithm using HMM(Hidden Markov Model) method. The relation between the mechanic system and the human has just been unilateral so far This is the why people don't want to get familiar with multi-service robots. If the function of the emotion recognition is granted to the robot system, the concept of the mechanic part will be changed a lot. (omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.394-399
• /
• 2012

This paper describes a stability and dynamic characteristics of bearingless helicopter main rotor in hover. Baseline rotor configuration is defined and modal analysis for the configuration is taken to verify the dynamic characteristics. The kinematic pitch-lag couplings through ways of pitch link installation are analyzed to know effects on loads, frequencies and stability. The effects of pitch link attachments in spanwise direction and chordwise direction as well as pitch link inclination on thrust, power, flpa-lag-pitch mode frequencies and inplane damping are examined. Pitch link at trailing edge location in chordwise direction has influence on aeroelastic stability of the rotor. Also, the pitch link with negative inclination angle makes inplane damping increase.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.337-343
• /
• 2012

NREL(National Renewable Energy Laboratory) Baseline controller conduct using method proposed RISO National Laboratory in Region 3. which designed the blade-pitch control system using a single degree-of-freedom model of the wind turbine. Idealized PID-Controlled rotor-speed error will respond as a second-order system with the natural frequency and damping ratio. RISO proposed specific natural frequency(=0.6 rad/s) and damping ratio(=0.7). If specific Eigen value apply to NREL 5 MW wind turbine, differ with pitch respond for simulation results of RISO report. Variation of specific eigen value investigate performance of NREL 5 MW wind turbine.

• 한국소음진동공학회논문집
• /
• 제20권3호
• /
• pp.229-234
• /
• 2010

This paper presents the analysis of pitch static attitude(PSA) in thermally assisted magnetic recording(TAMR) suspension. The TAMR suspension using an optical fiber has high stiffness such as vertical, pitch and roll. Therefore, P-torque is greatly increased by the optical fiber. Also, flying height(FH) of the slider with TAMR suspension can be largely changed by PSA. In this paper, we focus on the FH by PSA of TAMR suspension. The FH is investigated using various PSA and proper PSA is proposed.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.77-84
• /
• 2011

Tire manufactures have dealt with noise problem by varying the pitch of the tread. The various formulas for the variations are generally determined differently, however. Often these variations are based on a combination of trial and error, intuition, and economics. Some manufactures have models and analogs to test tread patterns and their variations. These efforts, however practical, do not determine the best variation beforehand or guarantee the best results. For this reason it was felt that a general mathematical approach for determining the best variation was needed. Moreover, the method should be completely general, easy to use, and sufficiently accurate. This paper discusses a mathematical method called Mechanical Frequency Modulation(MFM) which meets the above requirements. Thus, MFM pertains to computing an irregular time sequence of events so that the resulting excitation spectrum is shaped to a preferred form. The first part of this paper treats the theoretical basis for computing an optimum variation ; the second part discusses experimental results and simulation program which corroborate the theory.

• 항공우주시스템공학회지
• /
• 제18권1호
• /
• pp.29-36
• /
• 2024

최근 도심항공모빌리티(Urban Air Moility, UAM)의 개념이 미래항공모빌리티(Advanced Air Mobility, AAM)으로 확장되면서 틸트로터형 수직 이착륙기에 관한 연구개발이 활발하다. 틸트로터의 경우 수직비행과 수평비행 사이에 천이비행을 하게 되는데 천이비행 구간의 비행 안정성을 확보하기 위해 블레이드 피치각 제어시스템을 활용할 수 있다. 또한 개별 블레이드 제어(Individual Blade Control, IBC)를 통하여 천이비행 구간 동안 발생하는 소음 및 진동을 감소시킬 수 있다. 본 논문에서는 전기-기계식 구동기 기반 블레이드 피치각 제어시스템의 개별 블레이드 제어를 위한 외란 관측기와 시간 지연제어기를 설계하고 수치 시뮬레이션을 통해 설계한 제어기들의 성능을 비교분석한다.

• 한국소음진동공학회논문집
• /
• 제24권2호
• /
• pp.146-153
• /
• 2014

This study investigates the effects of seat-design elements such as seating arrangement, shape, and height on speech privacy in high-speed trains. For the evaluation of speech privacy, acoustic simulation software was used to reproduce room acoustical conditions in passenger cars on the basis of in-situ measurement data. The influences of speech source directivity and source height on privacy distance ($r_P$) were investigated, and it was found that $r_P$ determined using an omni-directional source was relatively shorter than that determined using a directional source. It was also found that $r_P$ decreased when the source height was lower than the height of the seat-back because the seat-back blocked the propagation of speech from the sound source. The effect of seating arrangement was not significant when comparing the vis-a-vis seating and one-side seating arrangements. In addition, among the alternative seat-designs, the seats that block the space between the seats and cover the space near the ear were found to show significantly enhanced speech privacy in high-speed train passenger cars.

• 한국유체기계학회 논문집
• /
• 제18권6호
• /
• pp.71-75
• /
• 2015

The flow and noise characteristics of the regenerative blower are evaluated experimentally. To decrease the noise of regenerative blower at a high frequency, we arrange the impeller vanes unevenly by special formula. The uneven pitch formular consists of the combination of trigonometric function. The magnitude of degree between each vanes and the control parameters of trigonometric functions are main design parameters for the uneven pitch. The flow characteristics of even and uneven impellers are tested by the fan tester and compared each results. The efficiency of a blower is calculated by the axial power using a dynamo system. The noise property of designed impeller is measured in an anechoic room. In this study, we certify that the uneven pitch impeller is effective in the noise reduction at a high frequency.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.98-108
• /
• 1994

An assessment of a mathematical method of synthesing tire tread pitch noise spectra is studied. The method is based on the summation of phasors and the calculated spectra are conveniently generated as computer printout in the form of bar graph. The technique, its usefulness, its limitations and the implications of using such a model are discussed. This paper presents a basic study on optimum pitch arrangement for prediction and control of tire tread pitch noise in constraint condition relatied with tire properties, thus enabling optimum tread pitch arrangements to be determined at the design stage, by application of old tire tread pitch simulation.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2002년도 추계학술대회 논문집
• /
• pp.112-113
• /
• 2002

주물작업이란 용융된 금속을 미리 준비한 주형에 부어 원하는 형태의 주물을 만드는 금속성형작업으로서, 생산 공정에서 고열을 이용하여 금속을 용해, 주조하는 등의 작업 특성상 부유분진의 발생이 필연적이며, 일산화탄소, 금속 흄, 휘발성 코울타르 피치, 소음 및 진동, 고열, 전리방사선 등의 유해인자로 인한 피해가 극심하다. 특히 분진은 주물의 생산공정 중 용해, 조형, 탈사 및 후처리 등 거의 전 공정에서 발생되며, 결정형 유리규산(SiO$_2$)을 다량 함유하고 있어 인체에 흡입되었을 때, 건강의 악화 및 직업병의 원인으로서 작업 능률을 떨어뜨리는 요인으로 작용하고 있다(Burgess, 1995). (중략)