• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.560-567
• /
• 1998

The pitch of spot-weld is a important variable in a view of both production cost and strength of car-body. Various renditions for the selection of pitches have been researched and especially in this paper the buckling analysis is carried out for the 2-sheet pannel structures. The optimal pitch is obtained by optimization program and FEM, which can enhance the buckling strength.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.154-155
• /
• 2003

PMP(Phase Measuring Profilometry)측정법은 투영계와 기록계의 기하학적 구성과 광학계의 정렬적인 문제에 의해서 기본적으로 오차를 가지고 측정된다. 일반적으로 PMP 형상 측정에서 측정면과 광학계의 높이가 피 측정면에 비해서 상당히 큰 경우, CCD 카메라에서 높이 방향으로 측정영역이 작아지게됨으로써 측정위상이 기준면에서의 위치와 높이 방향에 따라서 다르게 나타나고 프로젝터가 측정면에 투영되는 간섭무의의 피치가 다르게 적용된다. (중략)

• 축산식품과학과 산업
• /
• v.12 no.2
• /
• pp.8-16
• /
• 2023

• Korean Journal of Materials Research
• /
• v.7 no.2
• /
• pp.121-128
• /
• 1997

Two-types of carbon fiber, anisotropic- and isotropic- pitch based, were expose to isothermal oxidation in air and $CO_{2}$ gas and the weight change rates was measured by TGA apparatus. Thc oxidation rate was laster in air than in $CO_{2}$ gas, and the oxidation rare of isotropic T- 101s liher was over 23 9 times faster than that of anisotropic HM-60 filler at $600^{\circ}C$ in air. The activation energy was 36-56 Kcal/mole at lower temperature range and 6- 13 Kcal/molc at higher temperature range. It was higher that the transition temperalure 01 reaction zone(zone 1. 2, :i) of 11M-GO fiber than that of T-101s fiber, and it was higher in $CO_{2}$ gas than in air. From SEM observation, it Lvas found that the oxidation of carbon fibers was progressed through the imperfection.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.3
• /
• pp.98-105
• /
• 2012

This paper describes a new method for a speech playback speed control with high quality. The proposed method provides an adaptive threshold filtering solution for detecting active regions of a speech signal that are followed by playback speed. For a given playback speed, threshold value is adaptively determined with the statistics(:mean and standard deviation) of each frame in speech, and is used to select only active blocks within the current frame. To minimize quality degradation(i.e., pitch degradation) caused due to high-speed playback, the threshold filtering priorly eliminates relatively low-activity blocks including voice and unvoice. Simulation results show that the proposed scheme provides a playback speed control solution with higher quality than SOLA(Synchonized OverLap Add) method using the pitch extraction of speech.

• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.231-238
• /
• 2012

This study aims for building an application system of converting sound into color image based on synesthetic perception. As the major features of input sound, both scale and octave elements extracted from F0(fundamental frequency) were converted into both hue and intensity elements of HSI color model, respectively. In this paper, we used the fixed saturation value as 0.5. On the basis of color model conversion theory, the HSI color model was then converted into the RGB model, so that a color image of the BMP format was finally created. In experiments, the basic system was implemented on both software and hardware(TMS320C6713 DSP) platforms based on the proposed sound-color image conversion method. The results revealed that diverse color images with different hues and intensities were created depending on scales and octaves extracted from the F0 of input sound signals. The outputs on the hardware platform were also identical to those on the software platform.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.2
• /
• pp.155-161
• /
• 2016

This paper proposes a novel fabrication method for a capacitive type micro-accelerometer with uniform nano-gap using photo-assisted electro-chemical etching. The sensitivity of the accelerometer should be improved while the electrodes between the inertial mass and the sensing comb should be narrowed. In this paper the nano-gap trench structure is fabricated using the photo-assisted electrochemical etching method. The sensor was designed and analysed using ANSYS simulator. The characteristics of the etching were observed according to the dc bias, the light intensity, the composition of the solution, the temperature of the solution, and the pattern pitch variation. The optimum etching conditions were dc bias of 2V, Blue LED of 20mA, 49wt% HF:DMF:D.I.Water=1:20:10, the pattern pitch of $20{\mu}m$. Uniform trench structure with width of 344nm and depth of $11.627{\mu}m$ are formed using the optimum condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.177-186
• /
• 2012

In this paper, we propose a design method that the crosstalk of probe connector pins satisfy the limitation of -30 dB. The parameters(inductance and capacitance) were extracted in the grid-structured probe connector pin system, and it is shown that the new parameters are easily calculated with increasing ground pin numbers using the previously calculated parameters. In addition, the crosstalk reduction algorithm by employing more grounds around the signal pin has been suggested, and it is confirmed that the suggested method is quite effective especially for the reduction of inductive couplings. Finally, we suggested the correlation between the pitch and the length of the pins to satisfy the crosstalk limitation of -30 dB with the given number of ground pins, which will be quite useful when design a probe connector pin system.

• Journal of Digital Convergence
• /
• v.11 no.5
• /
• pp.285-290
• /
• 2013

In a MPC coding using excitation source of voiced and unvoiced, it would be a distortion of speech waveform. This is caused by normalization of synthesis speech waveform of voiced in the process of restoration the multi-pulses of representation section. To solve this problem, this paper present a method of position compensation(PC-MPC) in a multi-pulses each pitch interval in order to reduce distortion of speech waveform. I was confirmed that the method can be synthesized close to the original speech waveform. And I evaluate the MPC and PC-MPC using multi-pulses position compensation method. As a result, $SNR_{seg}$ of PC-MPC was improved 0.4dB for female voice and 0.5dB for male voice respectively. Compared to the MPC, $SNR_{seg}$ of PC-MPC has been improved that I was able to control the distortion of the speech waveform finally. And so, I expect to be able to this method for cellular phone and smart phone using excitation source of low bit rate.

• Journal of Digital Contents Society
• /
• v.18 no.6
• /
• pp.1049-1056
• /
• 2017

This study focused on the changes in the voices in determining the effects of speech training. This study aimed to make more visible and scientific evaluation of the changes in the voices among the substantial effects obtained from speech training. As a result, some objective differences from before the speech training could be found in the voice of every learner. Each learner showed gradual technical improvement in a variety of vocal elements, including resonance and timbre, accuracy of pronunciation, pause; that is, the voice became more powerful, more accurate pronounced, more pausing and more stable than before the speech training. This study determined if speech training could change a voice and the results are expected to help speech learners participate actively in speech training and see their speech ability improved.