• 제목/요약/키워드: 피부밀착형

검색결과 5건 처리시간 0.019초

웨어러블 진단 및 재활 응용을 위한 신축성 전자소자 기술 (Stretchable Electronic Devices for Wearable Diagnosis and Rehabilitation Applications)

  • 박찬우;구재본;이정익;박형순
    • 전자통신동향분석
    • /
    • 제34권5호
    • /
    • pp.48-57
    • /
    • 2019
  • As the super-aged society approaches rapidly, the number of people suffering from post-stroke and other neurological disorders is significantly increasing, where prompt and intensive rehabilitation is essential for such people to resume their physical activities in normal daily lives. To overcome the inherent limitations of manual physical therapy, various types of exoskeleton robots are being employed. However, the need of the hour is softer, thinner, lighter, and even stretchable systems for precisely monitoring the motion of each joint without restricting the patients' movements in rehabilitation tasks. In this paper, we discuss the technological trends and current status of emerging stretchable rehabilitation systems, in which sensors, interconnects, and signal-processing circuits are monolithically integrated within a single stretchable substrate attachable to the skin. Such skin-like stretchable rehabilitation devices are expected to provide much more convenient, user-friendly, and motivating rehabilitation to patients with neurological impairments.

밀착형 셔츠 설계를 위한 피부변형의 3차원 측정 (3D Measurement of Skin Deformation for the Design of a Tight-fitting Torso Pattern)

  • 박혜준;오염군;홍경희
    • 한국의류학회지
    • /
    • 제34권11호
    • /
    • pp.1824-1835
    • /
    • 2010
  • This study develops tight-fitting torso patterns for performance garments by taking into account the skin deformation generated directly from a 3D scan during arm movements. The skin deformation caused during the arm movements was scanned after scanning the skin surface stamped with a circle. To create a torso pattern in response to skin deformation, the ratio and direction of the skin deformation were first measured and analyzed so that the 3D human body could be segmented. After translating, the 3D skin surface was segmented into 2D flat patterns, designing nude patterns and reducing them as well as tight-fitting shirts: the skin deformation segment shirts were made in response to the skin deformation. The features of the fabric deformation and the garment pressure were analyzed and evaluated. In comparison with a clothing construction segment shirt, the diameter of the skin deformation segment shirt was smaller as well the ratios of extension and reduction was less. The garment pressure of the skin deformation segment shirt was higher. The skin deformation segment shirt fitted more tightly compared to a clothing construction segment shirt as it covered the body more thoroughly and was as comfortable as the other shirts with less fabric deformation made as the body moved.

ICRP 103 권고기반의 밀착형·비밀착형 가공제품 사용으로 인한 몬테칼로 전산모사 피폭선량 평가체계 개발 (Development of the Monte Carlo Simulation Radiation Dose Assessment Procedure for NORM added Consumer Adhere·Non-Adhere Product based on ICRP 103)

  • 고호정;노시완;이재호;염연수;이재기
    • Journal of Radiation Protection and Research
    • /
    • 제40권3호
    • /
    • pp.124-131
    • /
    • 2015
  • 원료물질 또는 공정부산물을 가공하거나 이를 원료로 하여 제조된 제품인 가공제품은 함유된 천연방사성핵종(우라늄, 토륨, 포타슘 등)으로부터 감마선 방출로 외부피폭을 유발할 수 있다. 따라서 본 연구에서는 방사성핵종 농도 우라늄 토륨 $1Bq{\cdot}g^{-1}$, 포타슘 $10Bq{\cdot}g^{-1}$을 가정하고 평형상태의 감마선방출을 가정하여 최종사용자의 사용환경을 반영하여 몬테칼로 전산모사로 복셀팬텀인 ICRP 기준팬텀과 ICRP 권고 103을 적용하여 가공제품의 연간피폭선량을 계산하고 체계를 개발하였다. 가공제품은 사용환경에 따라 피부비밀착형(석고보드, 음이온 벽지, 음이온 페인트)과 피부밀착형(팔찌, 목걸이, 벨트, 뜸질기)으로 구분하였고 기하학적 모델링은 일반가구가 거주하는 주택의 유형 분포추이와 설계지침을 반영하여 룸모델링($3m{\times}4m{\times}2.8m$ 보수적으로 밀폐된 방)과 복셀팬텀 분할면에 직접 가공제품을 모사하였다. 사용시간은 한국형 노출지수 개발 및 운영체계 구축 보고서를 참고하였으며 알 수 없는 제품은 보수적으로 24시간을 가정하였다. 본 연구에서 가공제품의 연간 유효선량은 0.00003 ~ 0.47636 mSv로 평가되었으며 벨트류 장기등가선량률을 확인하여 복셀팬텀에 가공제품을 직접 모사하는 것의 의미를 확인하였다.

마스크팩 타입에 따른 인식 및 구매와 사용 행동에 관한 연구 (A Study on the Recognition and Purchasing and Usage Behavior of Mask Pack Type)

  • 유선희;홍수경
    • 융합정보논문지
    • /
    • 제9권6호
    • /
    • pp.233-241
    • /
    • 2019
  • 본 연구는 수도권에 거주하는 20~30대 여성을 대상으로 마스크팩 인식 및 구매 행동에 대하여 설문지를 이용하여 조사하였다. 본 연구 결과, 연구 대상자들은 피부미용에 대한 관심이 높지만 마스크팩 타입에 따른 특징과 차별성 인식은 미흡한 것으로 조사되었다. 마스크팩을 사용한 후, 조사 대상자들의 51.1%가 효능 효과에 만족한 것으로 조사되었으나, 마스크팩 사용 시 대표적인 불편한 점으로는 시트형 마스크팩은 사용성, 크기, 밀착성 및 피부 자극으로 불만족스러웠으며, 하이드로 겔타입의 소재와 슬리밍 타입은 내용물, 흡수성에 대해 불만족스러운 것으로 확인되었다. 또한, 셀룰로오스 팩과 하이드로겔 타입의 팩은 동일하게 불쾌감을 가지는 것으로 확인되었다. 본 연구 결과를 통하여 마스크팩 시장의 기초 마케팅 자료로서 활용이 가능할 것으로 사료되어 진다.

다층 및 다중구획 하이드로젤 제조 및 4D 마스크팩 적용을 위한 자가접힘 특성 분석 (Self-folding of Multi-layered and Compartmented Hydrogel Designed for 4D Mask Pack)

  • 임준우;정나슬;신성규;권혜진;정재현
    • 대한화장품학회지
    • /
    • 제44권4호
    • /
    • pp.399-405
    • /
    • 2018
  • 다층 및 다중구획 하이드로젤을 설계하여 4D 마스크팩 적용을 위한 자가접힘 특성분석을 수행하였다. 온도민감성 분자를 하이드로젤에 도입하여 팽창비가 다른 두 층으로 구성된 하이드로젤을 제조하였다. 나아가 팽창비 차이를 조절하여 자가접힘 정도가 다른 삼중구획 하이드로젤을 설계하였다. 상온에서 각각 0.03, 0, $0.03mm^{-1}$의 곡률을 갖는 구획화된 하이드로젤은 피부 온도에서 1.33, 0, $1.33mm^{-1}$의 곡률로 변화하여, 안면 밀착성이 현저히 높아지는 것을 확인하였다. 다층 및 다중구획 하이드로젤 제조 기술은 안면의 부위별 굴곡모양에 따라 자가변환이 가능한 맞춤형 4D 마스크팩 구현에 활용될 수 있다.