DOI QR코드

DOI QR Code

3D Measurement of Skin Deformation for the Design of a Tight-fitting Torso Pattern

밀착형 셔츠 설계를 위한 피부변형의 3차원 측정

  • Park, Hye-Jun (Research Institute of Human Ecology, Chungnam National University) ;
  • Wu, Yanjun (Dept. of Clothing & Textiles, Chungnam National University) ;
  • Hong, Kyung-Hi (Dept. of Clothing & Textiles, Chungnam National University)
  • Received : 2010.09.08
  • Accepted : 2010.11.01
  • Published : 2010.11.30

Abstract

This study develops tight-fitting torso patterns for performance garments by taking into account the skin deformation generated directly from a 3D scan during arm movements. The skin deformation caused during the arm movements was scanned after scanning the skin surface stamped with a circle. To create a torso pattern in response to skin deformation, the ratio and direction of the skin deformation were first measured and analyzed so that the 3D human body could be segmented. After translating, the 3D skin surface was segmented into 2D flat patterns, designing nude patterns and reducing them as well as tight-fitting shirts: the skin deformation segment shirts were made in response to the skin deformation. The features of the fabric deformation and the garment pressure were analyzed and evaluated. In comparison with a clothing construction segment shirt, the diameter of the skin deformation segment shirt was smaller as well the ratios of extension and reduction was less. The garment pressure of the skin deformation segment shirt was higher. The skin deformation segment shirt fitted more tightly compared to a clothing construction segment shirt as it covered the body more thoroughly and was as comfortable as the other shirts with less fabric deformation made as the body moved.

Keywords

Acknowledgement

Supported by : 한국학술진흥재단

References

  1. 김혜경, 권숙희, 김순자, 박은주, 서추연, 이숙녀, 전은경, 조정미. (2001). 피복인간공학 실험설계방법론. 서울: 교문사.
  2. 박혜준, 신승철, 손부현, 홍경희. (2008). 3D 패턴을 이용한 노인용 u-헬스케어 의복의 심전도 측정 연구. 한국의류산업학회지, 10(5), 676-682.
  3. 박혜준, 오염군, 홍경희. (2009a). On-body sensing용 의복 설계를 위한 3D 인체스캔을 이용한 피부변형의 측정방법. 한국의류학회 추계학술대회 초록집, 87.
  4. 박혜준, 홍경희, 조영숙. (2009b). 상반신 밀착패턴 제작을 위한 3차원 인체표면의 곡률기준 분할. 한국의류학회지, 33(1), 68-79.
  5. 산업자원부 기술표준원. (2005). 제5차 한국인 인체치수조사 자료-직접측정에 의한 인체치수 통계-. 서울: 산업자원부.
  6. 양진희, 박선형, 정기삼, 채재욱, 김현준, 최의중, 이주현. (2009). 동작에 따른 체표변형 측정결과를 이용한 미래 병사 전투복 설계안 개발-Moire 계측방법을 중심으로-. 한국감성과학회 추계학술대회 초록집, 49-53.
  7. 일본섬유기계학회. (1989). 피복과학총론. 이순원. 조길수, 이영숙 옮김 (1991). 한국학술진흥재단번역총서, 125. 서울: 교문사.
  8. 최명혜, 최영림, 남윤자, 최경미. (2007). 20대 성인 남성 상반신앞판형상의 평면 전개를 위한 표준화 연구. 한국의류산업학회지, 9(4), 418-424.
  9. 최영림, 남윤자, 최경미 (2006). Grid method에 의한 3차원 형상의 평연 전개를 위한 optimal matrix 표준화 연구. 한국의류학회지, 30(8), 1242-1252.
  10. 최지영, 오염군, 홍경희, 김시조, 서혜원. (2010). 동작시 3D 인체 스캔 데이터를 기반으로 한 하체표면의 무변형선 (Lines of non-extension) 분석. 한국생활과학회 춘계학술대회 초록집, 57.
  11. 間壁治子. (1991). 被服のための人間因子. 東京: 日本出版サビス.
  12. 中澤 愈. (1996). 衣服解剖學. 東京: 文化出版局.
  13. Cho, Y., Komatsu, Y., Inui, S., Takateral, M., Shimizu, Y., & Park, H. (2006). lndividual pattern making using computerized draping method for clothing. Textile Research Journal, 76(8), 646-654. https://doi.org/10.1177/0040517506066966
  14. Daanen, H., & Hong, S. A. (2008). Made-to-measure pattern development based on 3D whole body scans.lnternational Journal of Clothing Science and Technology, 20(1),15-25. https://doi.org/10.1108/09556220810843502
  15. Iberall, A. S. (1964). The use oflines of nonextension to improve mobility in full-pressure suits (AMRL-TR-64-118). Ohio: Wright-Patterson Air Force Base.
  16. Ito, N., Kotake, M., Santo, R., & Yamada, T. (2001). Effect of mean clothing pressure on compression sensation of women's underwear. Japan Society of Home Economics, 52(9), 865-875
  17. Jeong, Y. H., Hong, K. H., & Kim, S. J. (2006). 3D Pattern C이lstruction and its application to tight-fitting garments for comfortable pressure sensation. Fibers and Polymers, 7(2), 195-202. https://doi.org/10.1007/BF02908267
  18. Kirk, W., & lbrahim, S. M. (1966). Fundamental relationship of fabric extensibility to anthropometric requirements and garment performance. Textile Research Journal, 36, 37-47. https://doi.org/10.1177/004051756603600105
  19. Matsuyama, Y., & Kozumi, H. (1996). Change in human body relief by squatting as detennined by three dimension measurements and its application to lower garment design. The Japan Society of Home Economics, 47(2), 169-178.
  20. Park, J. H. (2009). Technology considerations for the design of smart apparel for the overweight. Unpublished Master dissertation, North Carolina State University, North Carolina.
  21. Pitts, B. M. (2003). Spacesuit: Sace craft. Unpublished Master dissertation, Massachusetts Institute of Technology, Massachusetts.
  22. Wang, J., Lu, G, Li, W., Chen, L., & Sakaguti, Y. (2009). Interactive 3D gannent design with constrained contour curves and style curves. Computer-Aided Design, 41(9), 614-625. https://doi.org/10.1016/j.cad.2009.04.009
  23. Ziegert, B., & Keil, G (1988). Stretch fabric interaction with action wearables: Defining a body contouring pattern system. Clothing and Textiles Research Journal, 6(4), 54-64. https://doi.org/10.1177/0887302X8800600408

Cited by

  1. A Survey on the Wearing Conditions of Tight-fit Pants for Men in Their 30's vol.18, pp.4, 2016, https://doi.org/10.5805/SFTI.2016.18.4.450
  2. Measurement of Surface Strain on Soft Biological Tissues Using Irregular Grid Pattern vol.37, pp.8, 2013, https://doi.org/10.3795/KSME-A.2013.37.8.1051