• Journal of Korean Society of Steel Construction
• /
• v.15 no.6 s.67
• /
• pp.629-637
• /
• 2003

This s paper presented the results of the three phases of fatigue tests to determine the fatigue strength of in-plane welded gusset joints, which are the most common details inevitably existing in the region of high stress range. A total of 57 fatigue specimens with varying thickness and strengths were made and tensile fatigue tests performed. One full-scale beam fatigue test was also performed. The validity of the fatigue strength of those details in the specification was confirmed, with the effects of thickness of flanges and welded attachments, length of attachments, and strength of applied steel examined. The characteristics of crack initiation and propagation were also observed. The test result was evaluated by comparing it with other test data and fatigue criteria of other countries. To determine the degree of stress concentration in the weld toe depending on geometric configuration such as attachment length and transition radius, analyses were performed. Compared to the present specification, analytical results indicate the need to revise and subdivide the detail categories.

• Journal of the KSME
• /
• v.16 no.1
• /
• pp.30-36
• /
• 1976

본강좌(II)에서는 종래에 제안된 피로기구와 이론의 개요를 소개함으로서, 구조용 재료의 강도 및 복잡성을 살펴보기로 하겠다. 기계적인 각종의 원칙 및 이론은, 피로를 동반한 기계적, 금속적 또는 물리적 현상중에 어느 하나의 현상에 대해서만 적응되고 또 이론이 적용되는 영역도, 재 료에 가해지는 응력의 고저를 고려하면 피로한도근방에, 또는 피해가 발생하는 영역 그리고 소성피로를 발생시키는 영역에만 제한된다. 따라서 이와 같은 사항들을 전부 고려한 통일된 피 로기계 및 이론은 아직 찾아볼 수는 없으나, 피로를 이해하는데 초보자에게는 도움이 될 것이 라고 인식되기에, 우선 종래에 발표된 피로에 대한 각종 이론 및 구조들 중에 중요하다가 생 각되는 몇 가지만을 간추리고 그 개요를 다음과 같이 간단히 소개하기로 했다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.117-117
• /
• 2004

일반적으로 접촉 피로 마멸은 구름 또는 미끄럼 접촉시 작용하는 반복 응력에 의해 표면과 표면 아래에 균열이 형성되고 성장 및 합체의 과정을 거쳐 표면의 일부가 떨어져 나가는 손상으로 기어나 캠-롤러, 구름 베어링과 같이 구름-미끄럼 접촉상태로 운전하는 기계요소에서 가장 중요하게 고려되어야 할 파손 메커니즘이다. 특히 기어나 구름 베어링 같이 고주기 접촉 피로 특성을 지니는 기계요소의 수명은 피로수명 실험과 통계적 기법을 이용한 Weibull 이론을 기초로 한 수명식을 대부분 사용하고 있다.(중략)

• The Monthly Diabetes
• /
• s.258
• /
• pp.36-37
• /
• 2011

스멀스멀 아지랑이 피듯 나른한 오월, 몸이 피곤하고 의욕이 없는 증상은 누구나 한 번쯤 겪어 보았을 것이다. 일반적으로 과로에 의한 피로는 충분한 휴식과 영양을 공급해주면 회복된다. 그러나 휴식을 취해도 호전되지 않고 피로가 6개월 이상 지속된다면 '만성피로'로 의사의 진찰을 받아보아야 한다. 왜냐하면, 피로의 원인이 당뇨, 암, 갑상선질환, 고혈압, 우울증 등에 있을 수 있기 때문이다. 실제로 원인 모를 피곤함으로 병원을 찾은 환자 중 종종 당뇨 진단을 받기도 한다. 그러면 당뇨병환자는 왜 기력이 떨어지고 피곤해하는지 당뇨와 피로의 상관관계에 대해 알아보도록 하자.

• Journal of Hospice and Palliative Care
• /
• v.7 no.2
• /
• pp.179-188
• /
• 2004

Purpose: The purpose of this study was to investigate the degree of fatigue and its related factors in cancer patients during chemotherapy. Methods: The subjects of this study consisted of 90 patients over 20 years old who were receiving chemotherapy at the injection room of the o.p.d. and ward admission care unit in a University hospital located in Gwang-ju city and data were collected from August 8th to October 2nd, 2002. Collected data were analysed using SPSS v 10.0. to obtain summary statistics for the descriptive analysis, t-test, ANOVA, pearson correlation, and multiple regression. Results: 1. Fatigue of the subjects was significantly correlated with physical distress score. and 6 items of subscale those were nausea, vomiting, anorexia, pain, and immobility, showed statistically significant correlation. 2. Fatigue of the subjects showed statistically significant differences according to a nap satisfaction. Fatigue of the subjects was significantly correlated with mood state, Also, all 5 items of subscale, which are those were anxiety, confusion, depression, energy, and anger showed statistically significant correlations. 3. Fatigue of the subjects showed statistically significant differences according to metastasis, chemotherapy cycle, post operation existence, post radiation therapy existence. There were significant negative correlation between fatigue and hematocrit and fatigue and weight change. There was no significant correlation between fatigue and spiritual well-being state. With the result to multiple regression, Immobility, Anorexia, Anger explained fatigue by, pain, and immobility showed statistically significant correlation.

• Composites Research
• /
• v.23 no.4
• /
• pp.21-27
• /
• 2010

In most engineering structures, fracture often takes place due to fatigue. Therefore, many studies about the effect of the various mode-mixities on fatigue characteristics have been performed. However, most of the former studies only address metal/metal interfaces or delamination of composite. In this study, the fatigue characteristics of composite/metal interfaces are investigated. The fatigue tests were performed using single leg bending(SLB)specimens that comprise composite and steel bonded to each other using co-cure bonding method. This paper focuses on fatigue characteristics depending on different mode ratios$(G_{II}/G_T$. The overall results obtained in this study show that the crack propagation rate increases with the mode II loading component.

• Journal of Power System Engineering
• /
• v.6 no.1
• /
• pp.61-67
• /
• 2002

15Cr-5Ni 석출강화 스테인리스강 3종류의 피로균열 발생과 성장 특성 및 파괴인성에 대하여 노치함수로서 연구하였다. 3종류강의 열처리 조건은 $482\;^{\circ}C,\;579\;^{\circ}C$ 및 $621\;^{\circ}C$이다. $621\;^{\circ}C$에서 4시간동안 열처리한 시험편 C는 약 $280\;MPa\;\sqrt{m}$의 가장 높은 파괴인성을 보였으며, 3종류에서 피로균열 성장이 가장 늦었다. $482\;^{\circ}C$에서 1시간 열처리한 시험편 A에서, 피로균열발생한계, ${\Delta}k{\rho}$, 는 노치반경0.3 mm에서 약 $280\;MPa\;\sqrt{m}$의 가장 높은 값을 보였다. 시험편 A는 시험편 B와 C보다 피로균열 성장이 빨랐지만, 피로균열 발생이 늦었다. 예 하중에 의한 노치선단의 압축잔류응력은 노치 시험편의 피로강도 향상에 유용한 방법이었다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.2
• /
• pp.160-166
• /
• 2016

Crew fatigue has been recognized as a major cause of maritime accidents. Systematic study on crew fatigue has a direct impact on the human factor, but the various measures being taken to prevent human error account for most of the causes of marine accidents situation are still insufficient. In this study, 128 people who have a variety of career and job types boarded the T/S Hanbada were analyzed the changes of fatigue during the 87-days a Maritime Silk Road Sailing Expedition. Crew fatigue was measured by period of time onboard classified as mental, physiological and physical changes through survey responses and individual interviews of nurses. Also, it was identified the fatigue factor through quantitative statistical analysis. As a result of repeated measures analysis of variance for the changes of fatigue in position and gender criteria in accordance with boarded period, the position-specific analysis was that Professor Rating group has appeared to feel more mental and physical fatigue than the student population. Also, the results of fatigability about the sex-specific analysis have been found that women feel more physical fatigue than men.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.11-17
• /
• 2015

High-density polyethylene (HDPE) piping, which has recently been applied to safety class III piping in nuclear power plants, can be butt-joined through the thermal fusion process, which heats two fused surfaces and then subject to axial pressure. The thermal fusion process generates bead shapes on the butt fusion. The stress concentrations caused by the bead shapes may reduce the fatigue lifetime. Thus, investigating the effect of the thermal butt fusion beads on fatigue behavior is necessary. This study examined the fatigue behavior of thermal butt fusion via a tensile fatigue test under stress-controlled conditions using finite element elastic stress analysis. Based on the results, the presence of thermal butt fusion beads was confirmed to reduce the fatigue lifetime in the low-cycle fatigue region while having a negligible effect in the medium- and high-cycle fatigue regions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.8
• /
• pp.627-638
• /
• 2017

Expecting fatigue life of mounted radar in aircraft is very important when designing, because the mounted radar in aircraft is exposed to long-term external random vibration. Among the methods of predicting the fatigue life, Fatigue analysis method in frequency domain has continuously been proposed in this field. In this paper, four fatigue analysis methods in frequency domain, which are widely used, have been selected and compared with the results for Specimen fatigue test. As a result, Dirlik and Benascicutti-Tovo methods have been matched better with fatigue analysis in time domain than the method in frequency method through the comparison between the fatigue analysis method in time domain and the method in frequency domain by conducting the specimen fatigue test with strain gage. Based on the results of the specimen fatigue test, We have conducted fatigue analysis of mounted radar in aircraft with Dirlik and Benasciutti-Tovo methods in the finite element model, and confirmed that the required life was satisfying.