• 한국의류산업학회지
• /
• 제1권3호
• /
• pp.252-258
• /
• 1999

미혼여성과 기혼여성을 대상으로 인체계측을 실시하여 직접 계측치와 지수치를 이용하여 주축요인분석을 한 결과 도출된 인자를 독립변수로 군집분석을 한 하반신 체형변인과 직물에 의한 플레어 스커트의 외관형상을 분석하기 위하여 영상처리를 이용하여 착용실험을 한 결괴는 다음과 같다. 1. 플레어 스커트의 헴라인 단면형상 분석 결과 체형변인에 의한 플레어 스커트의 드레이프 면적과 드레이프 계수는 드레이프의 면적이 크면 드레이프 계수도 큰 값을 나타내었다. 직물의 노드수는 드레이프성이 좋을수록 많이 형성되고 노드수가 많으면 노드지수 값은 작은 값을 가진다. 노드지수 값이 크면 노드의 고저가 균일하게 나타나고 작으면 노드의 고저가 불균일하게 나타난다. 또한 인체 측정치수의 허리둘레와 엉덩이둘레의 차이, 허리너비와 엉덩이너비의 차이 값이 큰 마름모형 체형변인에서 노드수는 많이 나타나고 노드지수 값은 작게 나타났다. 통형에 가까운 체형변인은 노드지수가 큰 값을 나타내므로 노드의 고저가 균일하게 나타났다. 직물의 노드수가 많으면 노드산 평균은 낮고, 노드지수 값이 큰 반면 노드수가 작으면 노드산펑균이 높으므로 노드산과 곡의 고저가 심하게 나타났다. 그러므로 직물의 드레이프성이 우수하다 할지라도 적정의 중량을 가지지 않으면 노드가 불균일하게 형성되어 의복 외관의 좋은 외관형상을 형성하지 못하는 결점이 나타나는 것으로 해석되었다. 2. 플레어 스커트의 헴라인 단면의 최대횡경은 인체측정값의 너비항목과 최대종경은 두께항목과 관련성이 높은 것으로 나타났다. 단면비의 값이 크면 최대횡경의 값이 크고 최대종경의 값이 작은 타원형에 가까운 단면형상이 나타나고, 단면비의 값이 작으면 최대횡경 값이 작고 최대총경 값이 큰 원형에 가까운 단변형상으로 나타났다. 3. 플레어 스커트의 외관형상 분석 결과 정면처짐분은 둘레항목, 너비항목 시아항목의 차이 값이 작을수록, 직물의 드레이프성이 좋을수록 크게 나타났다. 미혼여성과 기혼여성을 비교해 보면 기혼여성의 체형이 너비, 둘레항목사이의 치어 값이 적기 때문에 처짐분이 크게 나타났다. 측면처짐분은 인체측정값의 두께항목과 상관이 깊어 앞부분은 배두께가 클수록, 뒷부분은 엉덩이두께가 클수록 처짐분량이 크게 나타났다. 후면처짐분은 정면과 같이 S시료에서 드레이프성이 좋을수록 처짐분이 크고, 엉덩이너비는 크고, 엉덩이두께가 작올수록 처짐분이 크게 나타났다. 4. 플레어 스커트의 3차원 입체형상은 외관형상의 굴곡이 낮아 평평할 수록 이미지의 평균값은 높고 편차는 낮게 나타났다. 체형변인에 의한 플레어 스커트의 주름 형상을 정면, 측면, 후면에서 이미지 값 분포로 비교해 보면 정면, 후면보다 측면의 외관이 평활하여 이미지 분포폭이 좁게 나타나고 최빈값을 중심으로 회색에 가까운 쪽으로 치우쳐 있는 것을 불 수 있다. 5. 체형변인에 따른 플레어 스커트의 주름특성을 평가하기 위하여 영상처리법으로 얻은 결과를 3차원 업체형상으로 분석하기 위하여 6개의 영역을 측정한 결과 플레어 스커트는 체형유형에 따라 곡면을 형성하는 주름의 수와 주름강도가 다르게 나타나 위 아랫부분의 주름폭은 차이가 있었다. 위부분에서 아랫부분으로 내려올수록 주름높이 폭은 커졌다. 그러므로 주름의 높이와 플레어 스커트의 헴라인 단연형상의 노드각도와 밀접한 관련이 있는 것으로 나타났다. 즉, 주름의 높이가 높으면 노드 각도는 작은 값을 보이고, 주름의 높이가 낮으면 노드각도는 큰 값을 나타내었다.

• 패션비즈니스
• /
• 제14권2호
• /
• pp.127-137
• /
• 2010

The purpose of this study is to evaluate the differences of visual image by variations in the volume of flare and the length of flare skirt. The stimuli are 12 samples: 4 variations of volume of flare and 3 variations of the length of skirt. The data has been obtained from 181 fashion design majors. The data has been analyzed by Factor Analysis, ANOVA, Scheffe's Test and the MCA method. The results of the study are as follows: The visual image by the volume of flare and the length of flare skirt are composed of 4 factors : matureness, attractiveness, stiffness and softness, moderateness. In these factors, matureness is estimated by the most important factor. When the volume of flare is $180^{\circ}$, the visual images are shown to be better. As the skirt gets shorter, it has more vivid and attractive image. And as the skirt gets longer, it looks older and gentle but not too plain or ordinary. The volume of flare and skirt length interact with each other in matureness and attractiveness factors. But the volume of flare affects more in stiffness and softness and moderateness factors than skirt length.

• 한국의상디자인학회지
• /
• 제8권2호
• /
• pp.27-35
• /
• 2006

We studied the 3D simulating shapes of the flared skirt using NARCIS-Drape Simulation software made in Korea D&M FT. The experimental conditions were made of three types of cuttings (lengthwise, crosswise, 45 bias) and polyester fabrics for flared skirt (light, medium, heavy) and different simulating repetitions (1, 2, ${\cdots}$, 9, 10 times). We accomplished some experimental data on the 3D simulating shapes of the flared skirt made by different conditions. The 3D simulation shapes of the flared skirts were gradually getting stabilized from 5 repetitions. And the length of skirts and the width and depth of hems diminished lower by degrees as the simulating repetitions. It is considered that the simulating repetition for the flared skirt was appropriate in the range of 8 to 10 times. But it was not reasonably showed that the difference in the drape of the flared skirt was made by different cuttings and fabrics.

• 한국의상디자인학회지
• /
• 제15권2호
• /
• pp.77-89
• /
• 2013

This study investigated the formation of silhouette and hemline shape of knit flare skirts according to the properties of knit material through virtual clothing with a 3D virtual clothing system called i-Designer of Technoa, thus building a database of the property data of knit material to reduce the number of sample making steps repeated and implemented several times in the process of clothes making. The results would help to estimate a silhouette in advance, offer assistance to the development of original knit wear, and explore ways to provide basic data for the development of the knit industry of the nation. The investigator made 12 kinds of experimental clothes to the angles(width of skirt: $90^{\circ}$ and $180^{\circ}$), gauge(7G, 12G, and 15G), and grain directions(wale and bias direction) of experimental clothes for virtual clothing. The dynamic characteristics of knit skirt samples according to each gauge were measured with the KES-FB system. Draper shapes were analyzed with the sectional shape data of hemline based on i-Designer. As for the measurements of the sectional shape of hemline and the formation of silhouette, the number of nodes, the average height of node mountains and valleys, and the hemline width right and left and before and after increased at the angle of $180^{\circ}$ than $90^{\circ}$. As gauges multiplied, the number of nodes, and silhouette angle dropping. When considering grain directions, the number of nodes and silhouette index increased in the wale direction at the angle of $90^{\circ}$ with the number of nodes and silhouette angle increasing in the wale direction at the angle of $180^{\circ}$.

• 한국의상디자인학회지
• /
• 제9권3호
• /
• pp.35-46
• /
• 2007

The purpose of this study was to modify a Flared Skirt for women according to the somatotype of lower body. The subjects for the wear test were 3 students, who were in mean${\pm}1{\sigma}$ each somatotype. As seen in the study, it was found out that there was a difference in three dimensional shape of the lower part of the body even in the group of whom the body heights, measured by Martin's system, are alike. Due to such a difference in the three dimensional shape of the lower part of the body, it was found out to be a difference in drapability of the flare skirts. In order to have better fitness of the lower part of the body and to raise the visual effect, therefore, it is suggested that there need to develop a new model of the flare skirts considering three dimensional shape of the lower part of the body for the wearer or to take complementary measures for each body shape in case of applying traditional model.

• 한국의류학회지
• /
• 제19권4호
• /
• pp.628-636
• /
• 1995

The purpose of this study was to investigate the general distribution trend of drapery according to the material of flare skirt and the body size. 100% polyester and 100% rayon fabrics were chosen to compare the effect on the material type. The results from this study were as follows. (1) Both materials generally had similar trend of drapery (2) The difference of material influenced the shape and the amount of drapery. The amount of drapery in polyester was more than the one in rayon. (3) Rody size didn't significantly influence the shape of grapery. So it is concluded that material type is more important variable than the body size for the drapery.

• 한국의류학회지
• /
• 제22권1호
• /
• pp.139-148
• /
• 1998

This study was performed to develop the flare skirt pattern in CAD system by each of the textile's test. 1 made 28 flare skirts(360$^{\circ}$, length of 60 cm, straight gram at front ST side seam, 28 kind of textiles) and found the changes of skirt length. And I measured thickness, weight, density, drapability and bending in these textiles. Therefore, It analyzed these data and found it regression.

• 한국의상디자인학회지
• /
• 제13권2호
• /
• pp.103-119
• /
• 2011

This study set out to analyze the solid shapes of knit flared skirts, which are best represented in a 3-dimensional shape for all knit skirts, according to the seamed and seamless production method and to estimate the silhouettes of knit flared skirts based on the results. It also aimed to help with the introduction and spread of seamless weaving by revising and supplementing potential problems and provide findings that would be put to active use as basic data, thus contributing to the development of original knitwear and offering fundamental materials for the development of the knitting industry. A number of experimental knit flared skirts were made according to skirt angle ($90^{\circ}$ and $180^{\circ}$), gauge (7G, 12G, and 15G), and grain (bias, wale, and radial), including 12 kinds of seamed knit flared skirts and 6 kinds of seamless knit flared skirts. Using a three-dimensional shape measurement system, the investigator measured the cross-sectional shapes of their hemlines. The SPSS 12 Version program was used for statistical processing, and descriptive statistics such as mean and standard deviation were used to compare the seamed and seamless knit flared skirts in the measurements (measurement items) of their solid shapes according to the width, gauges, and grain directions. The central grain direction of seamless knit flared skirts was in a radial form and even hemlines, thus presenting a beautiful appearance and solid shape. The 3-dimensional shapes show that seamless knit flared skirts are superior to seamed ones. The research findings are expected to open a door for Korea's knitting industry to quickly respond to small quantity batch production and additional orders.

• 복식문화연구
• /
• 제18권3호
• /
• pp.465-475
• /
• 2010

For this study, 18 kinds of cut and sew or seamless knitted test garment were made. Samples differed from each other by skirt angles($90^{\circ}$, $180^{\circ}$), gauges(7G, 12G, 15G), and grain directions(bias direction, wale direction, and radial direction). After measuring the mechanical properties of various gauges on the seamless knitting machine, I compared shape of the knitted flare skirt through subjective evaluation on appearances. The data analysis methods used in this study were descriptive statistics, one-way ANOVA, Duncan-test, correlation analysis, and regression analysis. The subjective evaluation on appearances of knitted flare skirts showed the following: In case of $90^{\circ}$ skirt, the seamless skirt showed a much higher score in every gauge expect that of the cut and sew 12G, and silhouette of 15G wale direction. In case of the $180^{\circ}$ skirt, the seamless type showed a much higher score in every item over the cut and sew expect the silhouette part of 7G wale direction.

• 복식문화연구
• /
• 제17권3호
• /
• pp.472-483
• /
• 2009

The purpose of this study is to analyse the effects of knit samples' mechanical properties on changes of skirt length of knit flared skirt, and to compare it to the knitting method of a seamless knitted flare skirt. So, I compared the appearance and 3-dimensional shape of a seamless knitted flare skirt with those of a fully cut knit flared skirt. For this study, 18 kinds of cut and sew or seamless knitted test garment were made. The data analysis methods used in this study were descriptive statistics, one-way ANOVA, correlation analysis, and regression analysis. The results are as follows: The result of the evaluation of knit samples' mechanical properties by the KES-FB system showed that elongation decreased as gauge increased and course direction was greatest among grain directions. The length change after wearing the knitted flare skirts appeared wholly equal to the seamless knitted, compared with the cut and sew. The change was biggest at $180^{\circ}$, 7G of the cut and sew. In grain direction, bias cut showed more than 1.2cm of length change. As the weight and thickness increased, the length changes become larger. The regression analysis indicated that the greatest contributive variables on the length changes were elongation, weight, and thickness.