• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.1-2
• /
• 2021

3D NAND 플래시 메모리는 플래너(2D) NAND 셀을 적층하는 방식으로 단위 면적당 고용량을 제공한다. 하지만 적층 공정의 특성상 각 레이어별 또는 셀 위치에 따라 오류 발생 빈도가 달라질 수 있는 문제가 있다. 이와 같은 현상은 플래시 메모리의 쓰기/지우기(P/E) 횟수가 증가할 수록 두드러진다. SSD와 같은 대부분의 플래시 기반 저장장치는 오류 교정을 위하여 ECC를 사용한다. 이 방법은 모든 플래시 메모리 페이지에 대하여 고정된 보호 강도를 제공하므로 물리적 위치에 따라 에러 발생률이 각기 다르게 나타나는 3D NAND 플래시 메모리에서는 한계를 보인다. 따라서 본 논문에서는 오류 발생률 차이를 보이는 페이지와 레이어를 분류하여 각 영역별로 차별화된 보호강도를 적용한다. 우리는 페이지와 레이어별로 오류 발생률이 현저하게 달라지는 3K P/E 사이클에서 측정된 오류율을 바탕으로 페이지와 레이어를 분류하고 오류에 취약한 영역에 대해서는 패리티 데이터를 추가하여 차별화된 보호 강도를 제공한다. 오류 발생 횟수에 따른 영역 구분을 위하여 K-Means 머신러닝 알고리즘을 사용한다. 우리는 이와 같은 차별화된 보호정책이 3D NAND 플래시 메모리의 신뢰성과 수명향상에 기여할 수 있는 가능성을 보인다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.909-914
• /
• 2007

Today's dynamic nature of the construction environment requires management systems to be active enough to take real-time decisions. For real-time decision making, effective 3D spatial information acquisition is imperative. Various 3D data acquisition technologies are being developed and tested for 3D spatial information acquisition and its use for wide range of areas in the construction industry, however, there are shortcomings in these technologies. The major problems are long processing time and high cost which make current technologies impossible to be used for real-time applications. Laser-based Flash LADAR that illuminates the entire scene with diffuse laser light is comparatively fast and cost effective, therefore it is well suited for 3D spatial modeling of dynamic environment on a construction site. This paper presents experimental results to evaluate the performance of flash LADAR and discuss issues of applicability of Flash LADAR to 3D spatial modeling on a construction site.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.1-9
• /
• 2021

3D-NAND flash memory provides high capacity per unit area by stacking 2D-NAND cells having a planar structure. However, due to the nature of the lamination process, there is a problem that the frequency of error occurrence may vary depending on each layer or physical cell location. This phenomenon becomes more pronounced as the number of write/erase(P/E) operations of the flash memory increases. Most flash-based storage devices such as SSDs use ECC for error correction. Since this method provides a fixed strength of data protection for all flash memory pages, it has limitations in 3D NAND flash memory, where the error rate varies depending on the physical location. Therefore, in this paper, pages and layers with different error rates are classified into clusters through the K-means machine learning algorithm, and differentiated data protection strength is applied to each cluster. We classify pages and layers based on the number of errors measured after endurance test, where the error rate varies significantly for each page and layer, and add parity data to stripes for areas vulnerable to errors to provides differentiate data protection strength. We show the possibility that this differentiated data protection policy can contribute to the improvement of reliability and lifespan of 3D NAND flash memory compared to the protection techniques using RAID-like or ECC alone.

• Journal of the Korean Society for Railway
• /
• v.2 no.2
• /
• pp.15-20
• /
• 1999

철도의 초창기부터 선로 기술자들은 다음과 같은 목적을 위하여 최적의 궤도 표준을 달성하도록 노력하여 왔다. ㆍ 레일 이음매 보수의 제거 ㆍ 궤도 수명의 증가 ㆍ 더 높은 운전 속도와 더 무거운 하중을 위한 시설의 마련 ㆍ 승차감의 개선 이들 목적을 달성함에 있어 오랜 기간을 통하여 진보가 이루어져 왔으며, 이것은 장척과 장대 레일의 생산에서 가장 중요한 용접의 기술에 크게 의지하였다. 본고에서는 장대용접레일의 생산과 관련된 플래시 버트(Flash butt) 용접 기술의 원리와 고속철도용 장대용접 레일의 생산 등을 위하여 건설된 중앙궤도기지의 시설과 설비에 관하여 간략하게 소개한다.(중략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.789-790
• /
• 2013

$Er_2O_3/SiO_2$ double-layer gate dielectric shows low gate leakage current and high capacitance. In this paper, we apply $Er_2O_3/SiO_2$ double-layer gate dielectric as a charge trap layer for the first time. $Er_2O_3/SiO_2$ double-layer thickness is optimized by EDISON Nanophysics simulation tools. Using the simulation results, we fabricated Schottky-barrier silicide source/drain transistor, which has10 um/10um gate length and width, respectively. The nonvolatile device demonstrated very promising characterstics with P/E voltage of 11 V/-11 V, P/E speed of 50 ms/500 ms, data retention of ten years, and endurance of $10^4$ P/E cycles.

• Trans-
• /
• v.7
• /
• pp.103-121
• /
• 2019

In some documentary films, there are interviews, but in some other ones, there aren't any. As for the documentaries with interviews, the director uses talking heads to suggest their own arguments and to have audience agree. It is evident that interviews play a key role since they lead the story of a human-related documentary. Some directors prefer interviews where directors' questions and interviewees' answers are both heard. On the other hand, there a re directors who carry out the story just by using the answers from the interviewees. Then, it becomes crucial that we understand both of these styles and have new perspectives when watching documentary films. Ethics has always been considered one of the most important factors in documentaries and since they are believed to be "true," the influence documentaries have on the society is enormous. However, possibilities of exaggerating or manipulating the "truth" always exist. Therefore, it is important for the audience to identify the intentions of the director. As a matter of fact, there have been countless researches being done, but it is difficult to find studies that discuss the ways interviews are used in documentary films. The two different styles mentioned above do have huge differences in terms of directing methods. Thus, taking a look at differences from diverse angles will help us better understand the essentials of documentary films. This study will take examples from the interviews in Michael Moore's (2002), (2007) and observe how the flow of interviews can change when the voice of the director gets involved. There will also be a close examination of interviews in Kim Ilran and Hong Ji Yoo's (2011), and (2005) directed by Jim Butterworth, Aeron Lubarsky, and Lisa Sleeth, as well as Sebastian Junger and Tim Hetherington's (2010). By a careful review, use of dissolve, cross-cutting, and flashback will be analyzed to show how different editing techniques have an impact on subjective views of the director.