• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.481-487
• /
• 2013

To successfully accomplish a bit synchronization, a synchronizer should exploit a preamble pattern. A MFM (modified frequency modulation) flag is uses as a preamble in a PJM (phase jitter modulation) mode RFID standard. In the recent work, a synchronizer for a PJM mode tag was proposed, which is composed of several correlators. In this paper, we present a new bit synchronizer in which a coarse synchronization is done as in the previous work while a fine synchronization is performed via exploiting a violation bit included in the MFM flag. We show that the proposed synchronizer can significantly reduce the overall hardware complexity at the expense of slight burden to a demodulator structure. Through simulation, we also show that its performance is comparable to that of the previous system despite its hardware simplicity.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.1
• /
• pp.57-65
• /
• 2003

As a compressed water is rapidly expanded through a nozzle, two-phase flow of vapor and liquid is formed in the nozzle due to the flash evaporation. In the present study, critical flow of two-phase fluids is analysized using an Isentropic-Homogeneous-Equilibrium model and a Leung model. Calculation results show that the choke of the two-phase flow can be two different types of continuous and discontinuous chokings. For the stagnation pressure below 10 Mpa it is found that the continuous choking, which is similar to the choking phenomenon of single-phase gas flow, is possible only when the degree of subcooling is less than 10K.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.9 no.2
• /
• pp.81-86
• /
• 2014

In the scalable video coding standard, inter-layer prediction based on the coding information of the base layer was adopted to increase the coding performance. This prediction tool results in new syntax elements called motion_prediction_flag (mPF) and residul_prediction_flag(rPF), which are carried to notify the motion vector predictor (MVP) and reference block required in the motion compensation of the decoder. In this paper, an efficient coding method for mPF is proposed to enhance coding efficiency of the salable video coding standard. Through an analysis on the transmission of mPF based on the relationship between the MVPs, we discover the conditions where mPF is unnecessary at the decoder and suggest a modified rate-distortion (RD) cost function to make RD optimization more effective. Simulation results show that the proposed method offers BD rate savings of approximately 1.4%, compared with the conventional SVC standard.

• Journal of Advanced Navigation Technology
• /
• v.16 no.5
• /
• pp.831-838
• /
• 2012

In the transmission system, the transmission efficiency can be increased by applying the proper character coding method. This paper is to show the character coding rule in computer and information equipment etc to improve the transmission efficiency in datacommunications. The character coding rule showing in this paper was suggested by considering the two view points. First one is FLAG bits in HDLC and PPP protocol on datalink layer in OSI 7 layer. Second one is one of the scrambling method, HDB-3, on physical layer in OSI 7 layer. The former is to prevent the sequence of over 5bits of "1" in the character codes. The latter is to prevent the sequence of over 4bits of "0" in the character codes.

• Journal of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.255-259
• /
• 1990

The nitrogen-laser flash photolysis apparatus has been set up to detect directly the transient produced from the excited Benoxaprofen (BXP). The function of the instrument has been tested by using anthracene as a standard sample. The laser photoexcitation of BXP in ethanol has been carried out under a constant stream of $N_2$ gas and a transient absorption spectrurn has been recorded over the 400-600 nm. The effects of oxygen and ${\beta}-carotene$ on the transient spectrum reveal that thee maximum transient absorption at 415 nm is attributed to the triplet state of BXP and the triplet energy of BXP is above 22 Kcal/mole. In addition to the triplet state, another transient species has been observed to be produced, which is probably a radical form of BXP. The photosensitization mechanism of BXP is discussed based on these results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.519-521
• /
• 2013

무선 센서 네트워크에서는 에너지가 제한된 배터리로 네트워크를 구성하기 때문에 에너지 효율적 사용에 대한 연구가 주요한 이슈이다. 본 논문에서는 효율적인 에너지 사용을 위하여 트래픽 변화 환경을 위한 Wakeup 주기 제어 메커니즘을 제안한다. 제안되는 MAC 프로토콜은 수신자의 제어 신호로 데이터 전송이 시작된다. 송신 노드는 트래픽이 변화를 데이터 패킷 프레임에 플래그(flag)를 추가하여 수신노드에 전달한다. 수신 노드는 이를 통해 수신 노드의 Wakeup 주기를 제어한다. 제안되는 MAC 프로토콜은 트래픽이 적을 경우 수신 노드의 sleep 구간의 증가를 통하여 에너지가 절약된다. 또한 트래픽이 높은 경우 수신 노드의 Wakeup 주기를 줄여 송신 노드의 idle listening으로 발생하는 에너지 소모를 감소시킨다. 제안되는 MAC 프로토콜은 기존의 프로토콜과 비교하여 빠르게 Wakeup 주기를 조절함으로서 에너지 효율적면에서 더 좋은 성능을 보여준다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.1
• /
• pp.99-111
• /
• 2016

This paper presents an integrated fault diagnosis algorithm for driving motor of In-wheel independent drive electric vehicle. Especially, this paper proposes a method that integrated the high level fault diagnosis and the low level fault diagnosis in order to improve a robustness and performance of the fault diagnosis system. The high level fault diagnosis is performed using the vehicle dynamics analysis and the low level fault diagnosis is carried using the motor system analysis. The validity of the high level fault diagnosis algorithms was verified through $Carsim^{(R)}$ and MATLAB/$Simulink^{(R)}$ cosimulation and the low level fault diagnosis's validity was shown by applying it to a MATLAB/$Simulink^{(R)}$ interior permanent magnet synchronous motor control system. Finally, this paper presents a fault diagnosis strategy by combining the high level fault diagnosis and the low level fault diagnosis.

• The Journal of Information Technology
• /
• v.8 no.3
• /
• pp.105-115
• /
• 2005

The CMA and MMA blind equalization algorithm has the inevitable large residual error caused by mismatching between the symbol constellation at a steady state after convergence. Stop-and-Go algorithm has a very superior residual error characteristics at a steady state but a relatively slow convergence characteristics. In this paper, we propose a SAG-Flagged MMA as a new adaptive blind equalization algorithm with a Stop-and-Go flag which follows a flagged MMA in update scheme of tap weights as appling the flag obtaining from Stop-and-Go algorithm to MMA. Using computer simulation, it is confirmed that the proposed algorithm has an enhancing performance from the viewpoint of residual ISI, residual error and convergence speed in comparison with MMA and Stop-and-Go algorithm. Algorithm has a new error function using the decided original constellation instead of the reduced constellation. By computer simulation, it is confirmed that the proposed algorithm has the performance superiority in terms of residual ISI and convergence speed compared with the adaptive blind equalization algorithm of CMA family, Constant Modulus Algorithm with Carrier Phase Recovery and Modified CMA(MCMA).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.3
• /
• pp.547-554
• /
• 2008

In this paper, two-stage pipelined floating-point multiplier (FP-MUL) is designed. The FP-MUL processor supports single precision multiplication for 3D graphic APIs, such as OpenGL and Direct3D and has area-efficient and low-latency architecture via saturated arithmetic, area-efficient sticky-bit generator, and flagged prefix adder. The FP-MUL has about 4-ns delay time under $0.13{\mu}m$ CMOS standard cell library and consists of about 7,500 gates. Because its maximum performance is about 250 MFLOPS, it can be applicable to mobile 3D graphics application.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.212-215
• /
• 2000

본 논문은 근거리 차량간통신(IVC)에서 첨단차량도로시스템(AVHS)의 플래툰 주행에 적합한 One-Ray Rician 채널 모델을 적용하여 간섭신호에 강한 장점을 지닌 600Hz 밀리미터파를 에서 패킷 오율 특성을 분석하였다. 차후에 사용자의 욕구 증대에 따른 멀티미디어 서비스를 만족시키기 위해서 Convolution 부호화 기법과 MRC 다이버시티 수신 기법을 동시에 적용하였으며 그에 따른 DS-CDMA/QPSK System의 패킷 오율 특성을 분석하였다.