• Resources Recycling
• /
• v.9 no.6
• /
• pp.15-22
• /
• 2000

There are many intensive efforts to develop the recycling technologies of waste plastics in steel works to tackle the saving of resources and the protection of the natural environment. In this study, the thermogravimetric analyses for three kinds of plastics, the combustion experiments and the theoretical approach for calculating the flame temperature in the blast furnace had been performed to understand the behavior of plastics in the raceway. The thermal decompositions of plastics were studied using thermogravimetric analyzer under the atmospheric condition. The starting temperature of thermal decomposition and the maximum weight loss point were increased in proportion to the logarithmic values of heating rate. The combustion characteristics of plastics were simulated in a coke-bed combustor. The combustion efficiency of plastics was lower than that of pulverized coal. The oxygen enrichment was found out to be one of the useful methods to increase the combustibility of plastics in raceway. The maximum injection rate of plastics was calculated based on the flame temperature.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.3
• /
• pp.131-140
• /
• 2018

As global environmental problems become more serious, bio plastic suppliers in developed countries are expected to drive demand for eco friendly packaging materials due to recycling regulations and consumer's attention. To catch up with this demand, various types of bio plastics have been introduced using plants such as corn and domestic companies are increasingly interested in this. Industrial interest in bio plastics is increasing to solve the recent environmental problems. The critical disadvantages of the weak mechanical strength and expensive product cost were gradually solved by extensive researches. In order to promote the active use of bio plastics, countries around the world are operation certification marks and standard systems. In this article, we have summarized recent trends in domestic and overseas bio plastics regulations, certification marks and identification labels.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.25-30
• /
• 2021

In this paper, we studied the coding technique for flicker mitigation and BER performance improvement in visible light communication system. In order to increase the transmission speed of visible light communication, a multi-transmission multi-LED transmission system using a plurality of LEDs is being actively studied. However, when data is transmitted through N LEDs in a multi-LED visible light communication system using N LEDs, there is a continuous zero section in which 0 is transmitted simultaneously according to the data sequence, and since the transmission section of 1 is different, flickering Or, a phenomenon in which the dimming level changes occurs. The visible light communication system is a communication system that simultaneously performs communication and lighting functions. Therefore, transmission efficiency of communication and brightness of lighting must be considered at the same time. To solve this problem, we proposed a flicker reduction mapping that can alleviate flicker and dimming level problems, improve error detection and BER performance through coding mapping of each LED data sequence.

• Journal of the Korea Society for Simulation
• /
• v.18 no.4
• /
• pp.49-58
• /
• 2009

Top-down approach in the intelligent robot research has focused on the single object intelligence however, it has two weaknesses. One is that has a high cost and a long spending time of sensing, calculating and communications. The other is the difficulty of responding to react changes in the unpredictable environment. we propose the collective intelligence algorithm based on Bottom-up approach for improving these weaknesses and the applied agent model and verify by simulation. The Modified Flocking Algorithm proposed in this research is the algorithm which is modified version of the concept of the Flocking (Craig Reynolds) which is used to model the flocks, herds, and schools in the graphics or games, and simplified the operation of conventional Flocking algorithm to make it easy to apply for the number of group robots. We modeled the Boid agent and verified possibility collectivization of the Modified Flocking Algorithm by simulation. And We validated by the actual multiple mobile robot experiment.

• Journal of Plant Biotechnology
• /
• v.44 no.1
• /
• pp.35-41
• /
• 2017

One of the most important species, Brassica rapa encompasses a variety of commercial vegetables, such as the Chinese cabbage, pak choi and oilseed crops. The LP08 of yellow sarson (Brassica rapa ssp, tricolaris) have a distinct morphology, with yellow seed color and a unique tetralocular ovary. LP21 of pak choi (Brassica rapa ssp, chinensis) have a dark brown seed color and bilocular ovary. In this study, we generated double haploid plants by crossing the LP08 (maternal variety) and LP21 (paternal variety), using microspore culture. A total of 66 accessions with various morphological characteristics were used for content analysis of flavonoids. The three flavonoids, quercetin, naringenin and kaempferol, showed differing contents in the two crossing parents. The Chinese cabbage type 'Chiifu' was used as the control. The highest accumulation of total flavonoids was observed in LP08. The lowest mean total flavonoids were found in 'Chiifu'. Among the 66 DH accessions, the quercetin contents of 18 accessions showed higher content than LP08. Kaempferol content was also high, and was found to be 79.7% of the total flavonoid content. Naringenin content was low at 2.8%, and was not detected in 22 accessions. Interestingly, the quercetin content positively correlated with the kaempferol content. These results can be used to identify genetic locus and genes related to useful traits. Phenotypic analysis of 66 DH accessions can further be used for natural selection of good breeding materials in B. rapa.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.10 no.1
• /
• pp.109-119
• /
• 2002

This study is to estimate that food waste bags with biodegradable plastic are really decomposed by microorganism in composting with food waste and to examinate how biodegradable plastic affects composting. 6 kinds of 30%, 4 kinds of 100% and 2 kinds of none biodegradable plastics were used in d1is study. In 30% biodegradable plastics the highest Degradation rare is 6% in meso-condition and 10% in thermal-condition. Srain at auto break decreased to 150% in meso-condition and 120% in thermal-condition. Stress at max load were also reduced to $180kgf/cm^2$ in mesocondition and $200kgf/cm^2$ in thermal-condition. Usually, LLDPE decreased larger than HDPE in physical characreristics but HDPE is higher in degradation rate. 1n stain at auto break and stress ar max load 100% biodegradable plastic declined to 230% and to $380kgf/cm^2$ in meso-condition and to 440% and to $400/cm^2$ in thermal-condition respectively. 100% biodegradable plastics showed higher biodegradation and decomposition then 30%. They appeared clearly through SEM observation. As a result, it was not appropriate to use 30% biodegradable plastics as food waste bag because they were not decomposed perfectly. It is possible to use 100% biodegradable plastic as it but cost is too high. So development of technique is needed.

• Information Systems Review
• /
• v.9 no.2
• /
• pp.41-66
• /
• 2007

The e-marketplace is a virtual marketplace where buyers and sellers meet in order to conduct transactions through the intermediation of market-makers. For the success of an e-marketplace, it is crucial for the market-maker to induce both buyers and sellers to make active transactions in it. However, their participation is frequently deterred by potential risk factors caused mainly by the inherent, structural complexity of the e-marketplace. Therefore, it is a critical challenge for the market-maker to identify and manage the transactional risk perceived by both the buyers and sellers. In this paper, we investigate the sources of buyers' and sellers' perceived risks and their mitigating factors in the e-marketplace. Specifically, we derive an analysis framework based on the economic theory of agency relationship. The framework includes four sources of the risks(perceived information asymmetry, fears of seller opportunism, fears of buyer opportunism, and concerns about market-maker's role incompleteness) and five mitigators of the risks(website informativeness, trust in market-maker, trust in seller, product diagnosticity, and social presence). Then, we empirically verify the framework through a case study on four successful e-marketplaces, and provide implications and strategies for the market-maker to effectively manage the transactional risks.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.3
• /
• pp.3-15
• /
• 1986

This study was carried out to investigate the drying rate and drying defects of Populus euramericana using the SDR (Saw-Dry-Rip) process. Flitches for SDR process were rough edged for compact kiln stacking, and then kiln-dried to 10 percent moisture content with dimensions in the same run, using the kiln-drying schedule ($T_8-F_4$) recommended by Rasmussen. The results obtained were as follows: 1. Drying rate of dimensions was slower than that of flitches. 2. Final moisture content and moisture distribution of dimensions were lower than those of flitches. 3. Average bowing, cupping, crooking, and twisting were reduced 20 percent, 25 percent, 54.9 percent, and 13.4 percent by SDR process respectively. 4. Bowing and cupping were more severe in dimensions from the area near the pith than in those from the area near the bark, and for crooking and twisting the reverse was true. 5. Surface checking of dimensions developed less than that of flitches and end checking of dimensions was similar to that of flitches. 6. Honeycomb, thickness shrinkage, and collapse of dimensions were similar to those of flitches. 7. The degree of casehardening of dimensions was higher than that of flitches.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.73-83
• /
• 2017

Used small household appliances have a wide variety of product types and component materials, and contain high percentage of black plastics. However, they are not being recycled efficiently as conventional sensors such as near-infrared ray (NIR), etc. are not able to detect black plastic by types. In the present study, an automatic sorting system was developed based on laser-induced breakdown spectroscopy (LIBS) to promote the recycling of waste plastics. The system we developed mainly consists of sample feeder, automatic position recognition system, LIBS device, separator and control unit. By applying laser pulse on the target sample, characteristic spectral data can be obtained and analyzed by using CCD detectors. The obtained data was then treated by using a classifier, which was developed based on artificial intelligent algorithm. The separation tests on waste plastics also were carried out by using a lab-scale automatic sorting system and the test results will be discussed. The classification rate of the radial basis neural network (RBFNNs) classifier developed in this study was about > 97%. The recognition rate of the black plastic by types with the automatic sorting system was more than 94.0% and the sorting efficiency was more than 80.0%. Automatic sorting system based on LIBS technology is in its infant stage and it has a high potential for utilization in and outside Korea due to its excellent economic efficiency.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.283-292
• /
• 2006

The Plastic material had been developed in the middle of the 19th century as an alternative material. Along with the development of the electrical engineering industry, it cropped up into center stage as an effective material and has increasingly expanded its use. As such, the plastic material has bound deep-seated ties with the design activities of industrial products, coming into the main material for a variety of industrial designs. Despite its dose affinity to design function in terms of its materialistic property, we have rarely seen examples of intensive study on the realtionship between plastics and designs. This study aims to find the importance that the substance affects industrial products in designs along with the development of plastic materials. With the objective in mind, we made a review of the streamline stylishness that had flourished in the twenties and thirties of the 19th century. Through this study, we understand that the plastic material has a close realtionshop with design activities in three different aspects. First, its amorphous state of nature makes it possible to change into any shape one desires in plastic surgery, which feature in turn influences the moulding of any design forms. Second, the plastic material is best suited to mass-manufacture, which induces to reduce the cost of production. Hence, the expansion of design industry. Third, the plastic material allows the multiple variety of colors, sensitivity, gloss and patterns and infinitely large possibility ranging from natural senses to human senses with the result that numberless diversity of designs cdould come into being.