• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.229-235
• /
• 2001

The thermal and photometric properties of mulching materials modify the radiation and energy balance on the mulched soil surface and thereby change the soil temperature. The soil surface energy balances and soil temperatures under the mulching treatments of non-mulched control, recycled paper (RPM), and black polyethylene film (BPFM) were compared before and after the establishment of potato canopy. On August 30 in 1998 when potato was not emerged yet and solar radiation was 17.9 MJ $m^{-2}$${day}^{-1}$ , the net radiation of the soil surface was estimated as 10.(1, 2. 4, and 1.3 MJ $m^{-2}$${day}^{-1}$ under the control, BPFM, and RPM, respectively. The sensible and latent heat loss from the soil surface was 9.65 MJ $m^{-2}$${day}^{-1}$ in the control, most of the net radiation being lost through evaporation and convection, whereas it amounted only to 1.39 MJ $m^{-2}$${day}^{-1}$ in BPFM and 1.36 MJ $m^{-2}$${day}^{-1}$ in RPM. Therefore, the soil heat fluxes were 0.36 1.02, and 0.06 MJ m$^{-2}$ day$^{-1}$ under the control, BPFM and RPM, respectively. On September 27 when potato canopy was fully developed, the soil surface net radiation in the control was sharply decreased as compared to that of Aug. 30, whereas the net radiation of the mulched soil surfaces showed little changes. The soil heat flux was -0.01, 0.95, and 0.12 MJ $m^{-2}$${day}^{-1}$ at the soil surface under the control, BPFM and RPM, respectively. As the mulching treatments brought about such alteration of energy partitioning into the soil, the highest soil temperature was recorded in BPFM and the lowest in RMP without regard to potato canopy development. However, the soil temperature differences among the treatments become smaller when potato canopy were fully developed.

• Clean Technology
• /
• v.21 no.3
• /
• pp.141-152
• /
• 2015

As environmental issues are emerging, bio-plastic suppliers in leading countries have been foreseeing the strong needs for environment-friendly materials such as eco-packing materials due to increased attention and regulation on recycle. To catch up with the demand, various types of bio-plastics based on natural feedstocks were developed and released on a market. These bio-plastic products drew the great attention even in domestic industries. At present, international oil price fluctuation and heavy charge on waste raise the unit cost of production and disposal expense of conventional plastic materials. These conditions make bio-plastic an alternative, because it is not restrained by oil prices and problem in the disposal. It is also expected that bio-plastic will be applied to various types of products including containers, industrial supplies, disposables, and medical supplies. However, the bio-plastic is still in its infancy, thus more research and understanding should be followed to put it to application. Bio-plastic is considered as environment-friendly material with high potential which has the advantages of production and disposal.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.383-388
• /
• 2019

The present study evaluated experimentally the effects of the type and content of plastic fine aggregates on cement mortar in order to utilize waste platics as raw materials of concrete. The two kinds of plastics, LLDPE and HDPE were used, and the mixing rate of plastic fine aggregates was increased 0, 25, 50, 75, 100%. The mortar of LLDPE fine aggregate and HDPE fine aggregate showed similar tendency in flow and material separation resistance, density and water absorption, compressive strength and flexural strength by age. The flowability of mortar mixed with plastic fine aggregates was increased up to 50% but decreased at 75% or more. The material separation resistance of mortar with plastic fine aggregates was also dramatically decreased. On the other hand, due to the low density of plastics, the density of mortar decreased with the mixing of plastic fine aggregates. Due to the low adhesion between plastic fine aggregates and cement, the compressive strength by age was decreased in proportion to the mixing ratio of plastic aggregate, but the flexural strength of each age decreased with maintaining a certain level at 50% or more of plastic fine aggregate content.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.8
• /
• pp.1296-1302
• /
• 2013

The quality of fresh jujube (Zizyphus jujuba) fruit rapidly declines in the postharvest stage and thus the effective storage conditions for agricultural warehouses were investigated in this study. Fresh jujubes (~10 kg) were stored using five different storage methods: plastic box without further packaging as a control (C-PL), plastic box with hanji packaging (H-PL), plastic box with functional film packaging (F-PL), cardboard box with hanji packaging (H-CB), and cardboard box with functional film packaging (F-CB). The storage boxes were stored in a refrigerator ($0^{\circ}C$ and 80~90% RH), equipped with an ethylene gas scavenging device for 9 weeks and then the quality characteristics were analyzed. The control storage conditions of jujubes showed a substantial decline in quality with decreases in moisture content, hardness, and sugar content as well as increases in decay ratio and redness. Among the tested storage conditions, F-CB was most effective in terms of maintaining the quality of jujube fruit while maintaining firmness, weightlessness, ripening degree from redness and visible appearance. In conclusion, effective storage and packaging conditions during storage enabled maintenance of fruit quality of jujubes for 9 weeks.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.2
• /
• pp.43-47
• /
• 2009

Respiration and quality of persimmon fruits were monitored through the storage at 0, 5, 15 and $25^{\circ}C$. Respiration rate data at different temperatures were used for determining the $O_2$ and $CO_2$ permeabilities required to maintain the optimal package atmosphere (1~3% $O_2$, 4~7% $CO_2$). The estimated gas permeabilities were then compared to those of available plastic films for examining their potential application at various temperature conditions. $O_2$ consumption and $CO_2$ production were at similar order and leveled at stable value after initial time span with higher rates measured at higher temperatures. Major quality indexes during storage were observed to be ascorbic acid content change and firmness destruction with the most significant changes at $25^{\circ}C$ Higher $O_2$ and $CO_2$ permeabilites were required at higher temperatures, and common plastic films were shown to be unable to satisfy those requirements. Films or devices of high permeation property such as silicone rubber or microporous film may be combined to increase the permeation properties satisfying the required high gas permeabilities.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.771-777
• /
• 2014

Injection-compression molding was used for film insert molding of an automotive door grip using films with three-dimensional embossed patterns. A vacuum mold was fabricated for vacuum-assisted thermoforming of the film, and an injection-compression mold was developed for film insert molding. Three pressure transducers were installed inside the mold cavity to measure cavity pressures. Injection-compression molding experiments under various compression strokes and toggle speeds were performed to investigate their effects on the cavity pressure and heights of the embossed patterns. The compression stroke of 0.9mm and low toggle speed resulted in a higher degree of conservation of embossed patterns. Additionally, the processing conditions for the maximum heights of embossed patterns were almost similar to those for minimum integral value of cavity pressures. The injection-compression molding process presents the opportunity to impart a soft-touch feeling of plastic parts printed with embossed patterns.

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.8-13
• /
• 2011

This research was carried out to investigate relationship between underground part environment control and growth or yield of sweet pepper in greenhouse as affected by covering materials. Daily amount of applied nutrient solution for research period in the greenhouse of plasticfilm house was more 1.6 times than that in glass house. But daily absorptance rate of nutrient solution and specific electrical conductance of rockwool between two greenhouses were not different in the range of 71.3-73.3% and $4.17{\sim}4.23dS{\cdot}m^{-1}$ respectively. Leaf area of sweet pepper, in leaf growth characteristics in two greenhouses, were $123.0cm^2$/leaf (in glass house) and $119.5cm^2$/leaf (in plasticfilm house), but the another (fresh and dry weight, dry matter) were not different. But weekly yield per square meter in glass house was more 1.3 times than that in plasticfilm house as $850g{\cdot}m^{-2}$ and $650g{\cdot}m^{-2}$, respectively. Effect of slab EC and absorptance rate of nutrient solution on leaf growth characteristics and yield between two greenhouses were not different. The results show when sweet pepper is cultured in greenhouse as affected by covering materials and above ground part environment, the plant growth and yield are little affected by underground part environment.

• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.714-719
• /
• 1996

Changes in physicochemical properties of brown rice (Chu-chunk byeo, Japonica type) kept at $4^{\circ}C,\;20^{\circ}C,\;30^{\circ}C\;and\;40^{\circ}C$ in laminated film (4 layer) pouches were analyzed. Hardness of brown rice grain increased during storage periods. In case of color changes, 'L' value increased during storage below $30^{\circ}C$, and decreased after three months at $40^{\circ}C$. The 'a' value did not change below $30^{\circ}C$, but increased at $40^{\circ}C$. The 'b' value increased under all storage conditions. Percent germination was above 97% below $20^{\circ}C$ regardlesss of storage period and was inhibited by heat above $30^{\circ}C$. The rice did not germinate after one month storage at $40^{\circ}C$ Gelatinization enthalpy and gelatinization peak temperature by DSC of brown rice powder decreased during storage. As a result, storage below $20^{\circ}C$ in laminated film pouch is recommended far brown rice.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.459-465
• /
• 2012

This study analyzed the effect of semi-rigid rafter-purlin cross-linking connection and driven steel pipe base on the static behavior of plastic greenhouse (PG). To promote the time and cost efficiency of the assembly process, each cross-linking connections of space arch type grid that consists of rafter and purlin is linked with steel-wire buckles, and each end of the rafters was driven directly to the ground to support the PG structure. However, in the design process, cross-linking connections and bases are idealized by being categorized as fully rigid or frictionless pinned, which does not appropriately reflect actual conditions. This study takes a full-scale loading test of PG and analyzes the effect of member cross-linking connections and driven steel pipe base on the behavior of a structure. The analysis provided a basis for determining the rigidity factor of member cross-linking nodes needed for finite element analysis, and the reliability of the result regarding the static behavior of PG.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2000.10b
• /
• pp.62-66
• /
• 2000

비닐하우스내 연질피복자재의 표면에 온도차이와 다습한 조건으로 물방울이 부착되어 광투과율이 떨어지고, 물방울끼리 결합된 커다란 물방울은 작물체에 직접 떨어져서 물리적인 손상과 냉해 및 병해를 유발하게된다. 이러한 문제점을 해결하게 위하여 폴리머로 구성된 플라스틱 피복자재의 표면에 계면활성제을 첨가하여 방적성을 높이는 제품이 보급되고 있으나, 연질필름 종류별 방적성에 대한 기준 제시가 미흡하여 농가의 구입혼란을 초래하고 있는 바, 간편하고 용이한 방적성 검정기술이 필요하여 수적직경을 측정함으로서 방적성에 대한 간이측정기술을 개발하였다. (중략)