• Elastomers and Composites
• /
• v.47 no.4
• /
• pp.336-340
• /
• 2012

Residual stress in the injection molded part is originated from thermal shrinkage and shear stress during injection molding process. There are many measurement methods of residual stress in the plastic part. Residual stress in opaque products can be measured by chemical cracking test. This method enables the solvent and specimen to react and to cause cracks. Cracks developed according to the level of residual stress. Thus the stresses in plastic part can be quantitatively measured by counting the number of cracks or measuring the size of cracks. Relationship between stress and number of cracks in a plastic specimen has been investigated in this study. Bergen jig was used to give a strain in the specimens those were molded using PC/PBT and PC/ABS. Solvent for the chemical cracking test was prepared using tetrahydrofuran and methyl alcol with the ratio of 1 to 3. Stresses in the specimen can be calculated by strains those were imposed by Bergen jig. Cracks were developed for stress higher than certain level. The number of cracks increased by second order function for stress.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.2
• /
• pp.104-115
• /
• 2014

Abundance and composition of marine debris on 13 beaches of Tongyeong City, South Korea were surveyed in 2013 Autumn. The average quantity of macro debris (>25 mm) was about 30 particle/$m^2$ and that of micro debris (1 mm-25 mm) was about 26,971 particle/$m^2$. This is a very high level compared with other areas of South Korea and the other countries. Among the 7 material types of debris (styrofoam, hard plastic, fiber, metal, glass, wood and others), styrofoam composed a large portion: 75% of macro debris and 98% of micro debris. And among the 'whole' styrofoam debris items whose original volume is remained more than 50%, styrofoam buoy debris composed 93%. This result suggests that the beaches surveyed are seriously contaminated by marine debris, and most of its sources are aquaculture styrofoam buoys. Management of styrofoam buoy debris used for oyster aquaculture in Tongyeong City is important not only for Tongyeong city, but also for other areas, because Tongyeong city hosts the biggest number of oyster aquaculture areas in South Korea.

• Journal of Climate Change Research
• /
• v.4 no.3
• /
• pp.201-210
• /
• 2013

In recent years, with the rising interest to reduce greenhouse gas emissions, the demand for using environmentally friendly product with low greenhouse gas emission is increasing in the printing industry as well. In this study, the carbon footprint of environmentally friendly product mineral paper that uses less plastic and wood than normal printing paper materials was analyzed by utilizing the life cycle assessment (LCA) technique. An analysis utilizing the LCA technique was done per the Korea carbon footprint certification guidelines and, for scope of study, it included the premanufacturing stage and manufacturing stage except for the use and disposal stages. As a result of the study, the emission coefficient of the mineral paper was calculated to be $0.81kg\;CO_2eq/kg$ and the emission from electricity usage of the entire greenhouse gas emission was calculated to be 45.85% ($0.37kg\;CO_2eq/kg$). In order to reduce greenhouse gas emission, required are the efforts to reduce the environmental loads by using energies that have relatively lower environmental loads, such as improvement in electricity usage efficiency and renewable energy, by increasing product completion rates during the manufacturing process of mineral paper.

• Journal of Korea Port Economic Association
• /
• v.31 no.4
• /
• pp.75-89
• /
• 2015

This study examines 31 import and export cargo items handled in each port to investigate which items face the most competition among the ports and how many of them are transited to other ports. The study aims to suggest implications for the future port policy of Incheon Port. It was found that the volume concentration in the Western Coast region from 2005 to 2014 became increasingly decentralized. The decentralization began in earnest in 2009 in particular, and the value was 0.448 in 2014, indicating fierce competition among the regions. According to the static and dynamic positioning analyses results for Incheon Port, Pyeongtaek and Dangjin Port, and Gunsan Port, using BCG Matrix, the static positioning analysis showed that Incheon Port belongs to the 3rd quadrant (Cash Cows), Pyeongtaek and Dangjin Port belongs to the 2nd quadrant (Question Marks), and Gunsan Port belongs to the (Dogs) group. This implies that Incheon Port has maintained its position with large shares compared to those of other ports, despite its low growth rate. However, the market position and growth rate of Incheon Port decreased according to the dynamic positioning analysis results. The shift-share analysis results indicated that the volumes of Incheon Port and Gunsan Port were shifting to Pyeongtaek and Dangjin Port. Moreover, the ratio of absolute growth to potential growth of Incheon Port and Gunsan Port turned out to be significantly lower than that of Pyeongtaek and Dangjin Port, implying that Incheon Port and Gunsan Port are declining as compared to Pyeongtaek Port and Dangjin Port. According to the LQ index analysis results, specialized items from Incheon Port that do not overlap with other ports included the following ten items: meat, fish and crustaceans, bituminous coals, crude oil and petroleum, petroleum-refined products, plastic rubber and products, textiles, nonferrous metal and products, electric machinery, and aircrafts and ships. In particular, it was confirmed that the bulk cargo of Incheon Port was actually shifting to Pyeongtaek and Dangjin Port following the policy of re-establishing port functions.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Clean Technology
• /
• v.17 no.2
• /
• pp.124-133
• /
• 2011

In addition to six substances regulated in EU RoHS including lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE), priority substances are identified in new RoHS II as hexabromocyclododecane (HBCDD), dibutyl phthalate (DBP), butyl benzyl phthalate (BBP) and diethylhexyl phthalate (DEHP). In this study, 20 plastic samples were collected from 12 domestic electrotechnical companies and levels of four restricted substances were determined by gas chromatography-mass spectrometry, Among 20 parts that compose washer, refrigerator or microwave oven, HBCDD was detected in three samples of NBR material with the amount of 42~381 mg/kg while DBP and BBP was not detected in any samples collected respectively, implying that these substance may not be used widely in plastic materials for EEE. However, DEHP was detected in all samples of NBR, PP, PBT, EPDM and PVC materials with the amount of 42 up to 59,400 mg/kg that exceeds the limit value of 0.1 wt% (1,000 mg/kg). Presence of a restricted substance in polymer material makes a great negative influence on a number of final product. To cope with coming RoHS II as well as REACH, action not to use DEHP in plastic material or the relevant notification in case of REACH seems to be needed. Screening test of Arsenic compounds such as diarsenic pentaoxide, diarsenic trioxide, lead hydrogen arsenate, triethyl arsenate that are included in REACH SVHC was done by ICP measurement Arsenium was detected in four samples made of NBR and PBT materials in the level of 15~700 mg/kg. By considering the screening method used in this study, the amount of arsenium compounds in the thermistor made of PBT material has a high chance of exceeding the regulated limit value.

• The Korean Journal of Mycology
• /
• v.16 no.4
• /
• pp.220-225
• /
• 1988

This study was carried out to investigate the effect on the system of crop rotation of sesame(Sesamum indicum L). The results of infected plant percentage and yield of sesame wilting disease, fluctuation of density of Fusarium oxysporum and Actinomycetes, and their pathogenicity test on Fusarium spp isolated from sesame cultural soil were investigated. Density of F. oxysporum was the highest in a sesame continuous cropping soil but that of Actinomycetes was the lowest in that soil. And that of F. oxysporum and Actinomycetes according to investigation date was the highest at June. 30 and July. 30, respectively. Their pathogenicity of F. oxysporum and F. solani isolated from sesame cultural soil to sesame, peanut and green gram were recognized to all isolates except one isolate among F. oxysporum 8 isolates and one isolate to sesame, 2 isolates to peanut and all isolates to green gram among F. solani 4 isolates. F. oxysporum density and infected plant of wilting disease were increased as a result of replanted cultivation of sesame, and yield of that was prominantly reduced. Relation between density of F. oxysporum in cultural soil and infected plant percentage showed positive correlation and yield index highly negative. There was little difference between sesame-upland rice and sesame-peanut in the system of crop rotation.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.5 no.1
• /
• pp.30-36
• /
• 1999

Physical analysis of some composite films of outer packaging at process cheeses in Korea is as following. In comparison with four composite films, tensile strength is $72.2{\mu}PET/PVDC/PE/AL-vac/PE\;film\;MD9.55kg/15mm,\;TD8.95kg/15mm>79.3{\mu}PET/PVDC/L-LDPE\;film\;MD5.37kg/15mm,\;TD5.01kg/15mm>96.9{\mu}PE/PVDC/PE\;film\;MD5.42kg/15mm,\;TD4.73kg/15mm>61.6{\mu}PVDC/PE/AL-vac/CPS\;film\;MD4.65kg/15mm,\;TD4.22kg/15mm$. Water vapor transmission is $72.2{\mu}PET/PVDC/PE/AL-vac/PE\;film\;0.41g/m^2{\cdot}24hr>79.3{\mu}PET/PVDC/L-LDPE\;film\;3.77g/m^2{\cdot}24hr>96.9{\mu}PE/PVDC/PE\;film\;3.81g/m^2{\cdot}24hr>61.6{\mu}PVDC/PE/AL-vac/4.91g/m^2{\cdot}24hr$. Gas transmission $O_2:N_2:CO_2$ is $72.2{\mu}PET/PVDC/PE/AL-vac/PE\;film\;1.81:0.74:4.2cc/m^2{\cdot}24hr{\cdot}atm>79.3{\mu}PET/PVDC/L-LDPE\;film\;13.4:6.4:34.2cc/m^2{\cdot}24hr{\cdot}atm>96.9{\mu}PE/PVDC/PE\;film\;15.3:7.1:42.0cc/m^2{\cdot}24hr{\cdot}atm>61.6{\mu}PVDC/PE/AL-vac/CPS\;film\;25.3:12.5:59.3cc/m^2{\cdot}24hr{\cdot}atm$ each other. And for preservation this were sealed to filths $N_2,\;CO_2$ gas or defilling ai (vacuum type) in the packaging and reserved less than $10^{\circ}C$ at refrigerator.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1983.05a
• /
• pp.9.2-9
• /
• 1983

We have observed 74 cases of radiolucent foreign bodies in food and air passage in E. N. T. department of Hang Gang Sacred Hospital, from Jan. 1972 to Mar. 1983. The following results were obtained. 1) Distribution of location was 56 cases(75.6 %) in food passage and 18 cases (24.4 %) in air passage. 2) In age distribution, 46 cases (82.1 %) of F. B. in food passage were found in patient over 21 years old and 12 cases (66.7 %) of F. B. in air passage were found in patient under 5 years old. 3) Female seems to be more frequently involved than male in cases of F. B. of food passage and in cases of air passage, male is more frequent. Food passage male: female - - - 25 : 31 Air passage male: female - - - 10 : 8 4) Meats was the most frequent foreign body in food passage (19 cases-33.9%), and the bony pieces was next (17 cases-30.4 %). Plastic material was the most frequent foreign body in air passage (9 cases-49.9 %), and the vegetable seed was the second (4cases-22.0 %). 5) In the location of F. B. in food passage, the first narrowing of the esophagus was the most frequent site and in air passage, the bronchus-especially right bronchus-was the most frequent site. 6) In the duration of lodgement, 44 cases(78.6 %) of F.B. in food passage were visited with - in 24 hours, and 11 cases (61 %) of F. B. in air passage were visited with - in 24 hours. 7) Simple chest PA was checked in all patient and then, esophagogram was checked in 34 cases of F.B. in food passage, among them positive finding was noticed in 23 cases. 8) Removal of F. B. in food passage by esophagoscopy was performed in 54 cases (96.4 %), but in the cases of air passage, removal of F. B. by bronchoscopy was performed in 14 cases (77.8 %). 9) Complications of food passage by the F. B. itself or esophagoscopy were esophageal mucosal laceration (1 cases-1.8 %) and esophageal perforation (1 case -1. 8 %) and complication of air passage by F. B. itself or bronchoscopy were atelectasis (2 cases -11.1 %) and pneumonia (3 cases-16.7 %).

• Journal of the Korean Society of Food Culture
• /
• v.3 no.2
• /
• pp.187-195
• /
• 1988

In accordance with the rapidly growing number of street food service without a registration, a study was undertaken to determine the present state of food service by the covered wagon bar, through an investigation in Jamwondong, around the south gate market and Kangnam subway station, in Seoul, between July 25th and August 25th of 1987. The survey was comprised of three parts: 1) foodservice operation in covered wagon, 2) personal and food handling hygiene, 3) food behaviors of customers. A total of 54 covered wagon bars, consisting of 51.8% mobile bars and 48.2% non-mobile bars, operating in the above three locations, were investigated. Survey results show non-mobile covered wagon bars to be more popular among persons in their thrities and fourties than among teens or the elderly; also among males than females; among company employees and college students than others. Seventy five percent of the mobile covered wagon bars served snack type foods and others served wine and foods for wine, in contrast to hundred percent of the non-mobile covered wagon bars served wine and foods for wine. The survey found many problems of hygiene, in method of food purchasing, menu planning, food preparation, dish washing treatment of leftovers and water supply, as well as personal hygiene. However, customers prefer the casual and popular atmosphere at the counter of the covered wagon bar. Finally, the study emphasizes a need for better operation of covered wagon bar, improvement of food stuff handling and the way of food services and personal hygiene. A change of the registration system from the illegal operation are urgently needed for better quality food services of covered wagon bars.