• Journal of KIISE:Information Networking
• /
• v.36 no.3
• /
• pp.222-230
• /
• 2009

A sensor network is an important element of the ubiquitous and it consists of sensor fields that contain sensor nodes and sink nodes that collect data from sensor nodes. Since each sensor node has limited resources, one of the important issues covered in the past sensor network studies has been maximizing the usage of limited energy to extend network lifetime. However, most studies have only considered fixed sink nodes, which created various problems for cases with multiple mobile sink nodes. Accordingly, while maintaining routes to mobile sink nodes, this study aims to deploy the hybrid communication mode that combines single and multi-hop modes for intra-cluster and inter-cluster transmission to resolve the problem of failed data transmission to mobile sink nodes caused by disconnected routes. Furthermore, a 2-level hierarchical routing protocol was used to reduce the number of sensor nodes participating in data transmission, and cross-shape trajectory forwarding was employed in packet transmission to provide an efficient data dissemination method.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1225-1236
• /
• 1999

기존의 오류 제어 방법들은 실시간 특성과 신축적인 신뢰성을 가지는 멀티미디어 통신 응용의 특징을 충분히 반영하지 못하고 있다. 본 연구는 기존의 재전송을 기반으로 하는 방법에 두 가지 기법을 추가하여 이 문제에 접근하였다. 첫째, 실시간 데이타의 마감 시간을 고려하여 미리 재전송을 실시하는 사전 재전송과 시간적으로 불가능하다고 판단될 때 복구를 포기하는 재전송 포기를 통한 적시 재전송 기법이다. 둘째, 요구되는 신뢰성에 근접하도록 오류가 많이 발생하였을 때만 재전송을 하는 선택적 오류 제어 기법이다. 본 연구는 두 기법을 적용한 오류 제어 프로토콜을 구현하고 네트워크 환경을 바꾸어 가며 성능을 검사하였다. 실험 결과, 제안된 오류 제어 방법은 전체적인 오류 제어 부하는 감소시키면서 오류 복구율을 높인다는 점을 확인하였다.Abstract The current error control schemes do not fit well to the characteristics of multimedia communications: real-time transmission and flexible reliability requirements. This research proposes a new error control scheme, which extends the retransmission-based error control with the following two mechanisms. First, error recovery is performed in two timely fashions: one is retransmission in advance where a retransmission is performed early enough for the deadline if an error is suspected, and the other is retransmission abort where a retransmission is given up if its recovery within the deadline seems to be impossible. Second, error control is selectively performed only when an actual error rate approaches to the threshold on a given reliability requirement. The proposed scheme has been implemented and experimented in various network environments. The performance results show that it has lower control overhead and higher error recovery than the existing schemes.

• The KIPS Transactions:PartC
• /
• v.13C no.4 s.107
• /
• pp.461-470
• /
• 2006

Recently mobile Stream Control Transmission Protocol (mSCTP) has been proposed as a transport layer approach for supporting mobility. When a mobile terminal (MT) is not located in the home network. a terminal that wishes to communicate with the MT is not able to establish mSCTP association to the MT, since mSCTP does not include the location management mechanism. In order to solve this problem. an interworking approach using the Session Initiation Protocol (SIP) INVITE method has been proposed. However, this approach has shown subsequent delay in acquiring the current location information of the MT when initiating mSCTP association establishment. In this paper, we propose new SIP methods and an approach that minimizes the address acquisition delay (AAD) by utilizing those SIP methods. Mathematical analysis and simulation results show that the proposed approach is more efficient than the previous approach in terms of AAD in all kinds of SIP environments.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.419-428
• /
• 2001

Advances in circuit and integration technology are continuously boosting the speed of processors. One of the main challenges presented by such developments is the effective use of powerful processors in shared memory multiprocessor system. We believe that the interconnection problem is not solved even for small scale shared memory multiprocessor, since the speed of shared buses is unlikely to keep up with the bandwidth requirements of new powerful processors. In the past few years, point-to-point unidirectional connection have emerged as a very promising interconnection technology. The single slotted ring is the simplest form point-to-point interconnection. The main limitation of the single slotted ring architecture is that latency of access increase linearly with the number of the processors in the ring. Because of this, we proposed the dual slotted ring as an alternative to single slotted ring for cache-based multiprocessor system. In this paper, we analyze the proposed dual slotted ring architecture using new snooping protocol and enforce simulation to compare it with single slotted ring.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.311-318
• /
• 2001

In recent years, users\` demands for multimedia service are increasing because of a diffusion of internet. Server systems, however, offer inefficient multimedia data service to users. Multimedia applications often transfer the same data between shared devices at very high rates, and therefore require an efficient I/O subsystem. Data copying and context switching have long been identified as sources of I/O inefficiency. Therefore we propose the new Multimedia Stream System Call (MSSC) mechanism, which is inserted into a Linux kernel: The MSSC mechanism operates in kernel domain with RTP (Real-time Transport Protocol). We present measurements indicating that use of our techniques resulted in a 12.5%∼14% gain in throughput as compared with a conventional Linux system.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.10
• /
• pp.2581-2595
• /
• 1997

In this paper, the real-time facility of the operating system for a VOD(Video On Demand) server have been analyzed and implemented. The requirements of the real-time scheduling have been gathered by analyzing the model of the video-data-transfer-path. Particularly, the influence of the bottleneck subsystem have been analyzed. Thus, we have implemented the real-time scheduler and primitives which is proper for processing the digital video. In performance measurements, the degree of the guarantee of the real-time scheduler have been experimented. The measured data show that the most time constraints of the process is satisfied. But, the network protocol processing by the interrupt is a major obstacle of the real-time scheduling. We also have compared the difference between the real-time scheduler and the non-real-time scheduler by measuring the inter-execution time. According to the measured results, the real-time scheduler should be used for efficient video service because the processor time allocated to the process can't be estimated when the non-real-time scheduler is used.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.449-458
• /
• 1999

In real-time systems, the accurate response time and minimal communication delay is highly desired. However, a conventional SNMP uses network resources inefficiently and introduces too much network traffic for periodic requests in particular. This paper presents an extended SNMP called Real-Time SNMP. It is designed to support real-time applications with time constraints to provide more accurate response time and less network traffic for periodic SNMP request PDU which is sent from a management station to agents. In addition, the module of the Real-Time SNMP agent works between management station and each SNMP agent to periodically generate requests for the associated agent. In this paper we have implemented the proposed Real-Time SNMP agent module and extended SNMP PDU. We also show the experimental results that indicated more punctual response time and reduced communication delay using the proposed Real-Time SNMP.

• Journal of Internet Computing and Services
• /
• v.13 no.4
• /
• pp.95-102
• /
• 2012

The development of applications for vehicular ad hoc networks (VANETs) has very specific and clear goals such as providing intellectual safe transport systems. An emergency warning technic for public safety is one of the applications which requires an intelligent broadcast mechanism to transmit warning messages quickly and efficiently against the time restriction. The broadcast storm problem causing several packet collisions and extra delay has to be considered to design a broadcast protocol for VANETs, when multiple nodes attempt transmission simultaneously at the access control layer. In this paper, we propose an early intelligent alert broadcasting (EI-CAST) algorithm to resolve effectively the broadcast storm problem and meet time-critical requirement. The proposed algorithm uses not only the early alert technic on the basis of time to collision (TTC) but also the intelligent broadcasting technic on the basis of fuzzy logic, and the performance of the proposed algorithm was compared and evaluated through simulation with the existing broadcasting algorithms. It was demonstrated that the proposed algorithm shows a vehicle can receive the alert message before a collision and have no packet collision when the distance of alert region is less than 4 km.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.3
• /
• pp.674-680
• /
• 2008

An SDR (Software Defined Radio) system based on general purpose computing platform has benefits of ease of software development process, high degree of software compatibility, and cost-effectiveness of general purpose processors. This paper discusses design and implementation of a dual-mode SDR system that supports both cordless phone and walkie-talky system running on Linux-based general purpose computing platform. For this purpose, we designed modulation and demodulation software on open source-based GNU radio middleware. We also designed a customized RF front-end hardware which performs frequency conversion between RF and IF. The proposed SDR system successfully exhibited its ability to operate both cordless phone and walkie-talky communication on Intel processor-based general purpose computing platform. But experience with the prototype SDR system shows that further research is required for run-time software reconfiguration and efficient integration with conventional TCP/IP protocol stacks.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.1
• /
• pp.75-79
• /
• 2010

Wireless sensor networks (WSN) are widely used in many applications. WSN acquires the data of surrounding environments with sensors attached to each node. It is important to design sensor networks that can communicate energy-efficiently as well as to get sensor readings with high accuracy. In this paper, we propose a novel routing scheme that assures high accuracy and significantly reduces data transmission costs in WSN with faults. First, we organize a number of network topologies randomly for routing sensor readings to the base station. Because every sensor node is connected each other with a single path, redundant transmissions are not incurred. It can reduce unnecessary transmissions and guarantee final sensor readings with high accuracy. To show the superiority of our scheme, we compare it with an existing multi-path routing scheme. In the result, our scheme has similar accuracy as the existing scheme and reduces unnecessary data transmissions by about 70% over the existing technique.