• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.209-218
• /
• 2020

This paper investigated actual crop evapotranspiration (ET_c) of tomato and paprika planted in test beds of the greenhouse. Crop water requirement (CWR) is the amount of water required to compensate ET_c loss from the crop. The main objectives of the study are to assess whether the actual crop watering (ACW) was adequate CWR of tomato and paprika and which amount of ACW should be irrigated to each crop. ET_c was estimated using the Penman-Monteith model (P-M) for each crop. ACW was calculated from the difference of amount of nutrient supply water and amount of nutrient drainage water. ACW and CWR of each crop were determined, compared and assessed. Results indicated CWR-tomato was around 100 to 1,200 ml/day, while CWR-paprika ranged from 100 to 500 ml/day. Comparison of ACW and CWR of each crop found that the difference of ACW and CWR are fluctuated following day of planting (DAP). However, the differences could divide into two phases, first the amount of ACWs of each crop are less than CWR in the initial phase (60 DAP) around 500 ml/day and 91 ml/day, respectively. Then, ACWs of each crop are greater than the CWR after 60 DAP until the end of cultivation approximately 400 ml/day in tomato and 178 ml/day in paprika. ET_c assessment is necessary to correctly quantify crop irrigation water needs and it is an accurate short-term estimation of CWR in greenhouse for optimal irrigation scheduling. Thus, reducing ACW of tomato and paprika in the greenhouse is a recommendation. The amount of ACW of tomato should be applied from 100 to 1,200 ml/day and paprika is 100 to 500 ml/day depend on DAP.

• Proceedings of The Korean Society of Health Promotion Conference
• /
• 2004.10a
• /
• pp.1-16
• /
• 2004

This paper considers the possibilities of health promotion from the following perspectives; (1) IUHPE, (2) socio-cultural similarities, (3) action research, and (4) learning from our past. 1. The IUHPE values decentralized activities through regions, and countries such as Japan, Korea, Hong Kong, Taiwan and China belong to NPWP region. Since IUHPE World Conference was held in Japan in 1995, Japan used to occupy more than 60% of NPWP membership. After 2001, membership is increasing rapidly in Chinese speaking sub-region. The transnational collaboration is still in its beginning phase. 2. Confucianism is one of key points. Confucian tradition should not be seen only as obstacles but as advantages to seek a form of health promotion more acceptable in East Asia. 3. Within the new public health framework, people are expected to create and live their health. However, especially in Japan, the tendency of 'lacking of face-to-face explicit interactions' is still common at health-promotion settings as well as academic settings. Therefore, the author tried participatory approaches such as asking WlFY (interactive questions designed for subjects to review their daily life and environment) and as introducing round table interactions. So far, majority of participants welcome new trials. 4. The following social phenomena are comparatively discussed after Japanese invasion and occupation of Korea ended in 1945; ·status of oriental medicine, ·separation of dispensary services, and ·health promotion specialist as a national license. In contrast to Japanese' tendency of maintaining the status quo and postponing of substantial social change, trend toward rapid and dynamic social changes are more commonly observed in Korea. Although all of above possibilities are still in their beginning stages, they are going to offer interesting directions waiting for further challenges and accompanying researches.

• Management & Information Systems Review
• /
• v.36 no.5
• /
• pp.61-83
• /
• 2017

The purpose of this study is to investigate the mediating effects of psychological empowerment between participative leadership and creative behavior. Especially, it aims to analyze the unidimension and multidimension of psychological empowerment in an integrated manner, and to suggest effective practice of participative leadership together with theoretical and methodological implications. In this study, the dependent variable was measured separately with time lag as a method to solve the common method bias that can be shown by the self-report type survey method, and positive emotions and negative emotions expressing emotional states in job situations were employed as control variables along with rank. A total of 283 questionnaires were collected from employees who work for companies in various industries with more than 300 domestic employees. SPSS PROCESS macro program('model 4') was used for statistical analysis. Results, First, the full mediation effect of psychological empowerment(unidimension) was confirmed in the relationship between participative leadership and creative behavior. Second, the analysis of the multidimension of psychological empowerment revealed the full mediating effect of meaning, self-determination, and impact, and the mediating effect of competence was not significant. Third, as a result of comparing the mediating effects of unidimension of psychological empowerment and the mediating effects of multidimension, the magnitude of mediating effect of unidimension was found to be much greater than mediating effect of multidimension. And The magnitudes of the three multidimensional mediating effects were similar. This is a case in which the motivational model of participative leadership revealed in the overseas study is proven in the domestic management environment and is significant in that it is the basis of future research. Based on the results of the empirical studies, the implications and limitations of the study and future research directions are presented.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.324-332
• /
• 2011

Purpose: The purpose of this study was to compare the stress distribution of teeth and jaw on load by differentiating property of materials according to each layer of widely used mouthguard. Materials and methods: A Korean adult having normal cranium and mandible was selected to examine. A customized mouthguard was constructed by use of DRUFOMAT plate and DRUFOMAT-TE/-SQ of Dreve Co. according to Signature Mouthguard system. The cranium was scanned by means of computed tomography with 1mm interval. It was modeled with CANTIBio BIONIX/Body Builder program and simulated and interpreted using Alter HyperMesh program. The mouthguard was classified as follows according to the layers. (1) soft guard (Bioplast)(SG) (2) hard guard (Duran)(HG) (3) medium guard (Drufomat)(MG) (4) soft layer + hard layer (SG + HG) (5) hard layer + soft layer (HG + SG) (6) soft layer + hard layer + soft layer (SG + HG + SG) (7) hard layer + soft layer + hard layer (HG + SG + HG) The impact locations on mandible were gnathion, the center of inferior border, and the anterior edge of gonial angle. And the impact directions were oblique ($45^{\circ}$). The impact load was 800 N for 0.1 sec. The stress distribution was measured at maxillary teeth, TMJ and maxilla. The statistics were conducted using Repeated ANOVA and in case of difference, Duncan test was used as post analysis. Results: In teeth and maxilla, the mouthguard contacting soft layer of mandibular teeth presented lowest stress measure and, in contrast, in condyle, the mouthguard contacting hard layer of mandibular teeth presented lowest stress measure. Conclusion: For all impact directions, soft layer + hard layer + soft layer, the mouthguard with three layers which the hard layer is sandwiched between two soft layers, showed relatively even distribution of stress in impact.

• The Journal of Korean Academy of Sensory Integration
• /
• v.17 no.3
• /
• pp.26-45
• /
• 2019

Objective : The purpose of this study is to develop educational goals, training content, and training methods for the intervention course of the Korean Academy of Sensory Integration (KASI) and to conduct competency-based intervention courses based on the competency model for sensory integration intervention. Methods : This study was conducted on work therapists who participated in the 2019 intervention course of KASI. In the first phase, educational needs were analyzed to set goals for the interventional course. In the second phase, a meeting of researchers drafted the intervention course education program and the methods of education, and the intervention course was conducted. In the third phase, the changes in educational satisfaction and performance level pre- and post-intervention course for each competency index were investigated. Results : The educational goals of "learning and applying the clinical reasoning process of sensory integration intervention" and "intervention by applying the principle of sensory integration intervention" were set after reflecting on the results of the analysis of the educational requirements. The length of the competency-based intervention course was 42 hours. The average education satisfaction level of participants in the arbitration process was 4.48±0.73, and the average education satisfaction level of the supervisor was 3.92±0.71. In both groups, the most satisfying curriculums were the data-driven decision-making process and the intervention goal-setting lecture. But the satisfaction level of was the lowest. Before and after the intervention course, there were significant changes in the performance of the two behavioral indicators of the analytic skills in the expertise competency cluster of the competency model. Conclusion : This study is meaningful in that it conducted a survey of educational needs, the development and implementation of an educational curriculum, and an education satisfaction survey through systematic courses necessary for education development.

• 대한공업교육학회지
• /
• v.41 no.1
• /
• pp.68-87
• /
• 2016

This research conducted a survey for total 166 teachers of schools so as to analyze validity and satisfaction for performance objectives of SMB administration subsidy the HRDP and the CEP in Specialized High School. The results of research are as follows. First, teachers recognize that purpose of HRDP is to expand employment of specialized high school and provide human resource of SMB. And, they recognize that HRDP is important to improve school outcomes and makes a positive effect on the improvement of school outcomes. Second, teachers recognize that objectives of HRDP are improvement of student's understanding for SMB, improvement of teacher's understanding for SMB, improvement of SMB's understanding of school, cultivation of student's occupational view, systematization of career guiding program based on employment process, strengthening of industry-academia cooperation education, improvement of the level of student's skill, fulfillment of workplace experience and practice focusing workplace learning, training of customized human resource for SMB, improvement of student's adaptation to the workplace, improvement of employment rate for SMB, expansion of job opportunities for students with SMB, preparation of the base of connection between school and SMB, publicity of school, expansion of opportunities to cooperate between SMB and school, establishment of cooperative system among industrial association and school, introduction and operation of the employment connective model for joint education and employment, strengthening of field professionalism of teachers. However, satisfaction for the achievement of objectives of HRDP except for strengthening of industry-academia cooperation education and improvement of employment rate for SMB is relatively lower than the validity. Third, teachers in charge of human resource training business of middle and small sized company's specialized high school recognize that objectives of CEP are expansion of job opportunities for students with SMB, excavation of good-quality SMB, expansion of opportunities to cooperate between SMB and school, fulfillment of workplace learning, improvement of student's major foundation and in-depth skill, improvement of literacy, math, teamwork and communication abilities for students' job performance, improvement of student's working attitude and student's proper career exploration decision. However, satisfaction for achievement of objectives of CEP is relatively lower than the validity.

• Journal of Chest Surgery
• /
• v.38 no.2 s.247
• /
• pp.101-109
• /
• 2005

Background: In sudden cardiac arrest, the effective maintenance of coronary artery blood flow is of paramount importance for myocardial preservation as well as cardiac recovery and patient survival. The purpose of this study was to directly compare the effects of pulsatile and non-pulsatile circulation to coronary artery flow and myocardial preservation in cardiac arrest condition. Material and Method: A cardiopulmonary bypass circuit was constructed in a ventricular fibrillation model using fourteen Yorkshire swine weighing $25\~35$ kg each. The animals were randomly assigned to group I (n=7, non-pulsatile centrifugal pump) or group II (n=7, pulsatile T-PLS pump). Extra-corporeal circulation was maintained for two hours at a pump flow of 2 L/min. The left anterior descending coronary artery flow was measured with an ultrasonic coronary artery flow measurement system at baseline (before bypass) and at every 20 minutes after bypass. Serologic parameters were collected simultaneously at baseline, 1 hour, and 2 hours after bypass in the coronary sinus venous blood. The Mann-Whitney U test of STATISTICA 6.0 was used to determine intergroup significances using a p value of < 0.05. Result: The resistance index of the coronary artery was lower in group II and the difference was significant at 40 min, 80 min, 100 min and 120 min (p < 0.05). The mean velocity of the coronary artery was higher in group II throughout the study, and the difference was significant from 20 min after starting the pump (p < 0.05). The coronary artery blood flow was higher in group II throughout the study, and the difference was significant from 40 min to 120 min (p < 0.05) except at 80 min. Serologic parameters showed no differences between the groups at 1 hour and 2 hours after bypass in the coronary sinus blood. Conclusion: In cardiac arrest condition, pulsatile extracorporeal circulation provides more blood flow, higher flow velocity and less resistance to coronary artery than non-pulsatile circulation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.387-393
• /
• 2021

In this study, finite element analysis was performed to evaluate a method of increasing the fatigue life of the pipe connection structure commonly used in the topside structure of offshore platforms. MSC Patran/Nastran, a commercial analysis program, was used, and the critical structural model was selected from the global analysis. To realize the stress concentration phenomenon according to the load, modeling using 8-node solid elements was implemented. The main loads were considered to be two lateral loads and a tensile load on a diagonal pipe. To check the hotspot stress at the main location, a 0.01 mm dummy shell element was applied. After calculating the main stress at the 0.5-t and 1.5-t locations, the stress generated in the weld was estimated through extrapolation. In some sections, this stress was observed to be below the fatigue life that should be satisfied, and reinforcement was required. For reinforcement, a bracket was added to reduce the stress concentration factor where the fatigue life was insufficient without changing the thickness or diameter of the previously designed pipe. Regarding the tensile load, the stress in the bracket toe increased by 23 %, whereas the stress inside and outside of the pipe, which was a problem, decreased by approximately 8 %. Regarding the flexural load, the stress at the bracket toe increased by 3 %, whereas the stress inside and outside of the pipe, which was also a problem, decreased by approximately 48 %. Owing to the new bracket reinforcement, the stress in the bracket toe increased, but the S-N curve itself was better than that of the pipe joint, so it was not a significant problem. The improvement method of fatigue life is expected to be useful; it can efficiently increase the fatigue life while minimizing changes to the initial design.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.3
• /
• pp.270-285
• /
• 2016

Various opinions and discussions have been actively in progress which are connected with cultural heritage since 'Sustainable Development Goals, SDGs' was announced by UN Sustainable Development Summit 2015 as Post-2015 Development Agenda. Apart from SDGs, conservation of cultural heritage itself stands on the basis of sustainability that originality, characteristic, diversity of cultural heritage should be permanently preserved. From that point of view, it is necessary to understand practical ODA for cultural heritage, far from theoretical approaches and policies. This paper is intended to look into the domestic and overseas situation related to ODA of Asian cultural heritage and the mentioned problems, future plans and challenges. First, the background and concepts about ODA were described and then ODA projects which have been carried out by Japan and China as typical ODA countries for Southeast Asia were introduced. ODA of cultural heritage in Korea has relatively recently started for restoration work for historic sites of Laos and Cambodia and its scale and performance do not come to much yet. Therefore, to develop ODA of cultural heritage, there are suggestions as in the followings. First, it is necessary to have a long-term master plan of ODA projects for sustainability of cultural heritage. Second, based on the view from the long-term perspective, the selection and focus for ODA partner countries should be considered, avoiding short-term projects aiming at a number of countries. Not widespread existing projects by other countries, but the model of Korean ODA for cultural heritage only Korea can conduct should be prepared. The next thing is connection with sustainability, and ultimately the conservation of cultural heritage should result in benefit to the natives by giving an impetus to economy as well as fostering tourism of local areas. To accomplish that connection, educational training and building capacity are suggested as the most suitable alternatives. Cultural heritage of each country reflects its indigenous originality and characteristics, therefore, the restoration work should be conducted by people in each country as the best way. From this point of view, ACPCS held by National Research Institute of Cultural Heritage will take a role of a specialized training program in Korean way. Lastly, establishment of a control tower for ODA in Korea is necessary. JCIC(Japan Consortium for International Cooperation in Cultural Heritage), which was set up in Japan for sharing information, establishment of cooperation system and prevention of overlapped projects will be an example we can take into consideration.

• Journal of Plant Biotechnology
• /
• v.46 no.3
• /
• pp.165-171
• /
• 2019

Marker-assisted backcrossing (MABC) is useful for selecting an offspring with a highly recovered genetic background for a recurrent parent at early generation to various crops. Moreover, marker-assisted backcrossing (MABC) along with marker-assisted selection (MAS) contributes immensely to overcome the main limitation of the conventional breeding and it accelerates recurrent parent genome (RPG) recovery. In this study, we were employed to incorporate rin gene(s) from the donor parent T13-1084, into the genetic background of HK13-1151, a popular high-yielding tomato elite inbred line that is a pink color fruit, in order to develop a rin HK13-1084 improved line. The recurrent parent genome recovery was analyzed in early generations of backcrossing using SNP markers obtained from genotyping-by-sequencing analysis. From the $BC_1F_1$ and $BC_2F_1$ plants, 3,086 and 4868 polymorphic SNP markers were obtained via GBS analysis, respectively. These markers were present in all twelve chromosomes. The background analysis revealed that the extent of RPG recovery ranged from 56.7% to 84.5% and from 87.8% to 97.8% in $BC_1F_1$ and $BC_2F_1$ generations, respectively. In this study, No 5-1 with 97.8% RPG recovery rate among $BC_2F_1$ plants was similar to HK13-1151 strain in the fruit shape. Therefore, the selected plants were fixed in $BC_2F_2$ generation through selfing. MAS allowed identification of the plants that are more similar to the recurrent parent for the loci evaluated in the backcross generations. MABC can greatly reduce breeding time as compared to the conventional backcross breeding. For instance, MABC approach greatly shortened breeding time in tomato.