• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.101-109
• /
• 2011

In this paper, we present a new routing protocol, multipath and multi-priority based routing protocol, (MMRP) for wireless multimedia sensor networks. The proposed MMRP chooses the multiple routing paths from source to the sink, then the selected paths are assigned with different priority levels depending upon the residual energy and transmission delay in the routing paths. That is, the highly prioritized I frames of the MPEG video are transmitted over the high priority routing paths, and other P and B frames are transmitted over the lower priority routing paths. The proposed MMRP protocol can be applied to time critical applications which require both lower latency and low power consumption over wireless multimedia sensor network. Simulations results of MMRP protocol show respectively an improvement of 23.48% and 23.11% in energy conservation and 81.6% and 32.01% improvement in latency as compared to protocols without and with multipath routing.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.52-59
• /
• 2010

This paper proposes a high-resolution and high-frame rate CMOS image sensor with column-wise cyclic ADC. The proposed ADC uses the sharing techniques of OTAs and capacitors for low-power consumption and small silicon area. The proposed ADC was verified implementing the prototype chip as QVGA image sensor. The measured maximum frame rate is 120 fps, and the power consumption is 130 mW. The power supply is 3.3 V, and the die size is $4.8\;mm\;{\times}\;3.5\;mm$. The prototype chip was fabricated in a 2-poly 3-metal $0.35-{\mu}m$ CMOS process.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.4
• /
• pp.16-22
• /
• 2012

In this paper, the forensic marking algorithm is proposed using psychoacoustic model II and MDCT for high-quality audio. The proposed forensic marking method, that inserts the user fingerprinting code of the audio content into the selected sub-band, in which audio signal energy is lower than the spectrum masking level. In the range of the one frame which has 2,048 samples for FFT of original audio signal, the audio forensic marking is processed in 3 sub-bands. According to the average attack of the fingerprinting codes, one frame's SNR is measured on 100% trace ratio of the collusion codes. When the lower strength 0.1 of the inserted fingerprinting code, SNR is 38.44dB. And in case, the added strength 0.5 of white gaussian noise, SNR is 19.09dB. As a result, it confirms that the proposed audio forensic marking algorithm is maintained the marking robustness of the fingerprinting code and the audio high-quality.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.3
• /
• pp.525-536
• /
• 2012

This paper proposes methods of securing Smart Grid system against various types of cyber threats by separating AMI networks from the public network, the Internet, and providing an AMI specific authentication framework. Due to the fact that thousands and millions of AMI devices to be deployed would be directly or indirectly connected to the public network without any authentication procedures for access control, currently being developed AMI architectures could be widely exposed to considerable number of penetrating attacks. Furthermore, there have not been a sufficient number of researches on authentication frameworks with basis on the specific circumstances of AMI networking that should support varied authentication protocols among security associations and AMI linking devices. This work makes a proposal of isolating smart meters from HAN devices and the Internet and integrating network/application level authentication frameworks with an EAP-based authentication architecture. These approaches are beneficial to deploy AMI with security and efficiency.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1214-1217
• /
• 2018

In this paper, we propose the development of a Small $360^{\circ}$ Oral Scanner embedded board. The proposed small $360^{\circ}$ oral scanner embedded board consists of image level and transfer method changing part FPGA part, memory part and FIFO to USB transfer part. The image level and transmission mode change unit divides the MIPI format oral image received through the small $360^{\circ}$ oral cavity image sensor and the image sensor into low power signal mode and high speed signal mode and distributes them to the port and transfers the level shift to the FPGA unit. The FPGA unit performs functions such as $360^{\circ}$ image distortion correction, image correction, image processing, and image compression. In the FIFO to USB transfer section, the RAW data transferred through the FIFO in the FPGA is transferred to the PC using USB 3.0, USB 3.1, etc. using the transceiver chip. In order to evaluate the efficiency of the proposed small $360^{\circ}$ oral scanner embedded board, it has been tested by an authorized testing institute. As a result, the frame rate per second is over 60 fps and the data transfer rate is 4.99 Gb/second

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.827-833
• /
• 2012

In this paper, we propose an improved optical flow algorithm which reduces computational complexity as well as noise level. This algorithm reduces computational time by applying level simplification technique and removes noise by using eigenvectors of objects. Optical flow is one of the accurate algorithms used to generate depth information from two image frames using the vectors which track the motions of pixels. This technique, however, has disadvantage of taking very long computational time because of the pixel-based calculation and can cause some noise problems. The level simplifying technique is applied to reduce the computational time, and the noise is removed by applying optical flow only to the area of having eigenvector, then using the edge image to generate the depth information of background area. Three-dimensional images were created from two-dimensional images using the proposed method which generates the depth information first and then converts into three-dimensional image using the depth information and DIBR(Depth Image Based Rendering) technique. The error rate was obtained using the SSIM(Structural SIMilarity index).

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.4
• /
• pp.98-106
• /
• 2011

Since prediction processes such as motion estimation motion compensation are not at the WZ video encoder but at its decoder, WZ video compression cannot have better performance than that of conventional video encoder. In order to implement the prediction process with low complexity at the encoder, WZ residual coding was proposed. Instead of original WZ frames, WZ residual coding encodes the residual signal between key frames and WZ frames. Although the proposed WZ residual coding has good performance in pixel domain, it does not have any improvements in transform domain compared to transform domain WZ coding. The WZ residual coding in transform domain is difficult to have better performance, because pre-defined quantization matrices in WZ coding are not compatible with WZ residual coding. In this paper, we propose a new quantization method modifying quantization matrix and quantization step size adaptively for transform domain WZ residual coding. Experimental result shows 22% gain in BDBR and 1.2dB gain in BDPSNR.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.53-56
• /
• 1999

ITU-T 국제 표준화 기구에서 인터넷 폰과 화상회의를 목적으로 개발된 G.723.1 음성 부호화기는 잡음 구간에서의 전송률을 낮추기 위한 방법으로 VAD(Voice Activity Detector)와 CNG(Comfort Noise Generator)를 사용하고 있다 이중 VAD는 최종적으로 현재 프레임의 에너지 레벨을 비교하여 음성의 활동 유무를 판정하고 있다. 하지만 G.723.1 VAD에서는 보다 안정적인 판정을 위해 음성 활동 구간 사이에 삽입되어 있는 묵음 구간에 대해서는 거의 대부분 음성이 활동하는 영역으로 판정을 하고 있다. 따라서 본 논문에서는 묵음 구간에 대해 보다 정확한 판정을 통하여 기존의 방법에 비해 전송율을 더욱 감소시킬 수 있는 방법을 제안한다. 실험에서는 묵음구간을 길게 조절한 문장을 사용하여 측정한 결과 평균 $46.8\%$ 정도의 전송율을 감소시킬 수 있었으며, 주관적인 음질평가의 경우 음질의 열하는 거의 발생하지 않았다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1059-1067
• /
• 1999

In this paper characteristics of ATM-PON is described and a TC layer controller for ATM-PON OLT is designed. This paper proposes an algorithm of economically controlling the grant information written by CPU to dynamically allocate the upstream bandwidth on the PON among the ONUs in a fair way and of encrypting the downstream data using a lower standard of encryption, termed data churning, which is used to distinguish it from existing transmission system scramblers and higher layer encryption methods. This paper also proposes a method of allocating churning-related message into the PLOAM cell in order to synchronously change the churning key between the OLT and the ONU.

• The KIPS Transactions:PartC
• /
• v.15C no.6
• /
• pp.567-572
• /
• 2008

It is necessary to study about the scheme to accept IP traffic effectively in OTN, according to expect that IP traffic data will be increase constantly. In this paper, we studied the encapsulation method of IP traffic through GFP in OTN transmission network. Therefore we knew the IP/GFP/OTN method is more efficient than existing methods from structure, overhead rates and possibility of grow, and showed the functional block of high level about this method. Also we showed the implementation scheme of this method by processing the functional simulation to make use of VHDL programming.