• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.3
• /
• pp.191-198
• /
• 2013

In this paper, the effects of uncertain material constant on the nonlinear behavior of steel frames with semi-rigid joints are examined. As to the probabilistic model, a normal distribution is assumed to simulate the uncertain elastic modulus of steel material. A nonlinear structural analysis program, which can consider both semi-rigidity in joints of the steel frames and uncertainty in the material constant, is developed. Including the geometric, material and connection nonlinearites which are the parameters of nonlinear behavior of steel frames, probabilistic analysis is conducted based on the Monte-Carlo simulation. In the probabilistic analyses, we consider the three different cases for random variables. The deterministic analysis results are shown to be in good agreement with those of the previous research results in the literature. As to the probabilistic analyses, it is observed that the coefficient of variation(COV) of displacements increases as the loading increases, and that the values of COV are dependent on the structural features of the frames.

• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.271-276
• /
• 2018

When the driver riding in a bicycle goes on board, the load of driver is shown differently according to the position loaded on the frame of bicycle. The load is applied most at the joint of bike frame and the load at the mid-part of frame is applied least than the other parts. So, the weight of frame is decreased as the part not applied with a lot of load is manufactured into the thin thickness. As the part applied with high load is manufactured into the thick thickness, it can be endured through this load. The configurations of general frame, double butted and triple butted were modelled by using CATIA program. The durabilities of each model due to the load of passenger were investigated by carrying the structural and fatigue analyses. As this study result investigated with the analysis program of ANSYS, the deformation of general frame happened most and that of triple butted became least. These simulation analysis data are intended to be used to design the actual bicycle frame in the most efficient way at design and manufacture.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.419-425
• /
• 2014

This study applied finite element analysis (FEA) to the body frame of the 200-meter class multi-legged subsea walking robot known as Crabster (CR200). The body frame of the CR200 is modeled after the ribcage of a human so that it can disperse applied external loads. It is made of carbon-fiber-reinforced plastic (CFRP). Therefore, the frame is lighter and stronger than it would be if it were made of other conventional materials. In order to perform FEA for the CFRP body frame, we applied the material properties of the CFRP as obtained from a specimen test to an FE model of CFRP frame. Finally, we performed FEA with respect to the load conditions encountered when the robot is launched into and recovered from the sea. Also, we performed FEA for the frame, assuming that it was fabricated using a conventional material, in order to compare its characteristics with CFRP.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.3
• /
• pp.55-63
• /
• 2022

A modular underground arch structure using steel and concrete has been proposed as a structure that has a simple construction process and can effectively resist cross-sectional forces generated during construction and use. Structural behavior of modular underground arch was evaluated about span length less than 15m through 3D structural analysis and test. In general, 2D and 3D structural analysis methods may be applied for structural analysis such as underground arch and tunnels. However, if a 2D or 3D structural analysis method is applied to evaluate the structural safety of a modular underground arch structure, it is difficult to model for structural analysis and it may take an excessively long time to interpret. Therefore, it may not be reasonable as a structural analysis method for considering the structural safety and earth pressure in the design process of a modular underground arch structure. In addition, when a modular underground arch structure is configured for span lengths to which the predetermined cross-section is applicable, it may be reasonable to evaluate only the safety of the structure and cross-section according to the cross-section and load conditions. Therefore, in this study, a structural analysis model using frame elements was proposed for efficient structural safety evaluation. In addition, structural analysis results of the 2D structural analysis model and the simplified analysis model using frame elements were compared, and the structural safety of the modular underground arch structure for a span length of 20m was evaluated with a simplified analysis method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1507-1514
• /
• 2011

Injection molding is the most commonly used process that uses plastic material. Today, the uses of plastic material are continuously increasing, and the range of application is also being extended by the development of novel materials. An inline skate consists of 4 components: the boot, frame, wheel and brake. Among these components, the frame is the most critical. The injection formability for a variety of injection materials for inline skate frames was studied. We also studied the injection formability of the product for various sizes of the runner and gate. In this study, injection molding analysis was performed using MOLDFLOW, and structural analysis was performed using ANSYS.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.400-403
• /
• 2009

본 연구에서는 평판 스페이스 프레임 구조물의 크기 및 형상최적화 기법을 개발하고자 한다. 이를 위해 평판 스페이스 프레임의 물량에 영향을 미치는 요소인 격자분할 수와 상 하부 평판사이의 높이를 주요 설계변수로 선정함으로써 부재크기 최적화뿐만 아니라 형상최적화 방안도 제시하였다. 또한 평판 스페이스 프레임의 절점 및 부재 자동생성방안이 고려되며 감도해석기법을 이용하여 개발된 최적화 프로그램을 예제모델에 적용하여 설계변수 변화에 따른 구조시스템의 최적의 대안을 강구하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.1
• /
• pp.13-25
• /
• 1997

전 세계의 대형 저속 디젤 엔진을 설계.제작하는 회사는 1980년대에 들어오면서 MAN - B&W, SULZER, MITSUBISHI의 3파전 양상을 띠고 있으며, 세계 시장점유율에서는 MAN - B&W가 50%이상을 차지하고 있다. 한국은 현재 한국중공업, 현대중공업, 쌍용중공업 및 삼성중공업에서 대형 저속 디젤 엔진을 생산하고 있다. 국내에서 생산되고 있는 대형 저속 디젤 엔진은 대부분이 MAN - B&W형이고 SULZER형이 약 20%를 차지하고 있다. 기술력은 위의 3사에 거의 의존하고 있으며, 설계보다는 생산에 치중하고 있는 실정이다. 선박용 엔진 구조물은 베드 플레이드(bed plate), 실린더 프레임(cylinder frame), 프레임 박스(frame box)등이 주 스테이 볼트(long stay bolt)에 의하여 체결되어 한 개의 대형 수직 구조물을 이루고 있으며, 프레임 박스의 안내면(guide plate)과 베드 플레이트의 베어링 지지부(bearing support)등은 엔진의 폭발력과 선박의 추진력을 직접적으로 받으므로 구조적 결함과 하자 보수의 문제들이 발생하고 있다. 이와 같은 사용상 및 제작상의 제문제를 해결하기 위해서는 유한요소 구조 해석 능력을 자체 보유하여 구조 설계상의 문제점을 분석하고 엔진 구조물의 취약 부위를 집중 검토하여야하며, 이를 통해 선박의 운항 중에 일어날 수 있는 사고를 미연에 방지할 수 있다. 그러나 국내에서는 이러한 대형 엔진 구조물의 설계/해석 기술이 거의 없고 구조적 문제점이 발생할 경우에는 모든 사항을 설계사(licensor)에 전적으로 의존하고 있는 실정이다. 한편, 설계 기술을 보유하고 있는 MAN - B&W, NEW SULZER DIESEL사 등은 정밀 구조 해석을 통하여 기존 엔진 구조물에 대한 안전성 및 신뢰성을 높임과 동시에 신 모델 개발에 박차를 가하고 있으나, 기술 이전은 회피하고 있어 대형 엔진 구조물에 대한 구조 해석 기술의 개발이 시급하다고 할 수 있다. 본 해설에서는 CAD/CAE(Computer Aided Design/Computer Aided Engineering)를 이용하여 위에서 제시된 대형 엔진 구조물의 구조해석 절차와 방법에 대해 간략히 설명하고자 한다.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.3
• /
• pp.95-103
• /
• 2011

Among structural systems for complex-shaped tall buildings, diagrid system is widely used because of its structural efficiency and beauty of form. Recently, mega frame is favorably employed as a suitable structural system for skyscrapers because this structural system has sufficient stiffness against the lateral forces by combination of mega members which consist of many columns and girders. Diagrid mega frame system is expected to be promising structural system for future super tall buildings. However, it takes tremendous analysis times and engineer's efforts to predict the structural behavior of tall buildings applied with diagrid mega frame system because the diagrid mega frame structure has significant numbers of elements and nodes. Therefore, efficient analytical method for all buildings applied with diagrid mega frame system has been proposed in this study to reduce the efforts and time required for the analysis and design of diagrid mega frame structure. To this end, an efficient modelling technique using the characteristics of diagrid mega frame structures and an efficient analytical model using minimal DOFs by the matrix condensation method were proposed in this study. Based on the analysis of an example structure, the effectiveness and accuracy of the proposed method have been verified by the comparison between the results of the proposed method and the conventional method.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.165-175
• /
• 1997

In this paper, the stress, buckling and vibration analyses have been performed for several case with the spot weld stiffened rear side frame, the unstiffened rear side frame and the dual thickness laser weld rear side frame. For stress and vibration analyses, the clamped boundary condition with spring supports are used. But for the buckling analyses, the both ends simply supported boundary conditions are used. For the nummerical analyses, ANSYS 5.0 code is adopted. Maximum stress of the spot weld stiffened rear side frame occurs in the main frame and is 80.9 MPa. Maximum strain is 501 .mu.. The maximum stress of the dual thickness laser weld rear side frame of 1.8mm thickness structure is equal with the stress of spot weld stiffened frame. The weight of dual thickness laser weld frame can be reduced about 17.2%. For the stiffened spot weld rear side frame with both ends simply supported boundary conditon, the bucking load is 52.54 kN. When the thickness of the dual thickness laser weld rear side frame become 1.9mm thickness structure, the buckling load of the stiffenerd rear side frame is equal to that of dual thickness laser weld frame. The reduction of the structure weight is about 5%. The fundamental natural frequency of the stiffened spot weld rear side frame for bending mode is 163.6 Hz and that of the dual thickness laser weld rear side frame is 179.8 Hz.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.1 s.44
• /
• pp.93-102
• /
• 2000

Substructuring-based hierarchical approach for design analysis and optimization of structural frames is presented in this study. The conceptual framework of this method is in the hierarchical modeling for design processes as well as structural systems and the methodology combining substructuring analysis and multilevel optimization. Mathematical models for analysis and synthesis are established on the common basis of substructuring systems. Modularized behavioral analysis, design sensitivity analysis and optimization are linked and integrated on the mathematical and structural basis of substructuring. Substructures are coordinated with the active constraints for system level and the weight ratio criteria. Numerical examples for test frames show the validity and effectiveness of the present approach.