• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.31-32
• /
• 2006

본 논문은 중형엔진 조립과정에서 실린더 프레임 회전 작업에 사용하는 지그의 구조해석을 수행한 후, 지그의 안전성을 검토하고 지그의 경량화를 통하여 실용적인 지그 설계안을 제안하였다. 현장 작업자가 들 수 있는 최대 무게를 넘는 지그를 구조해석 모델로 선정한 후, 해석모델은 지그, 실린더 프레임, 볼트, 너트, 샤클 핀을 3차원 입체요소로 구성하고 ABAQUS/Standard를 사용하여 재료 비선형 및 접촉을 고려한 구조해석을 수행하였다. 구조최적화를 위하여 응력이 상대적으로 낮은 부위와 작업성을 고려하여 설계변수를 선정하고, 실험계획법의 직교배열표를 활용하여 설계변수에 대한 각 부위의 민감도와 경량화 모델을 도출하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.3
• /
• pp.338-346
• /
• 2016

Wearable Device has various constraint about battery power consumption, size, weight, etc, because the devices is worn and operated by person and provide services. So, if a device includes too many functions, it dose not satisfies the constraint and lose price competitiveness due to become expensive. Therefore we suggest that make reassembly Unit Modular Device witch has common used functions in wearable devices and user can receive various services to reassemble Unit Modules. It is comprised of frames and modules. Each module has various functions. Each frames help module to communicate each modules. To realize this device, we design to guarantee each services to use necessary modules, to give priority to modules depending on the important of the task, to set that does not use to low energy mode.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.771-780
• /
• 2001

EJB(Enterprise JavaBeans) is the server-side component model and its purpose is to reduce the complexity of software development and to increase software reusability. Many concerns for development of EJB components have recently been raised. However, it is difficult to compose EJB components provided by third parties through the plug-and-play method. Therefore, the composition method by lego block styles is needed for EJB components. In this paper, we propose an approach to composition of EJB components using the C2 architectural style. In order to support EJB composition, we modified the general C2 architecture framework. We propose how to create EJB wrappers that can compose EJB components according to the C2 framework. Our approach also enables developers to create a new composite EJB that uses a C2 architecture which is composed of EJB components. To do this, we propose how to create a new composite EJB.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.155-156
• /
• 2023

In the case of steel door frames commonly found in general buildings, there are various assembly methods such as rivets, bolts, and welding, but the welding method is generally used. However, this welding joint method has many problems, such as distortion due to heat and damage due to external shock. In particular, when used as a fire door, problems may occur in the event of a fire due to distortion caused by heat from welding and the weak welded joint area. In the case of rivet or welded joints, when moved after assembly, joint loosening due to external shock may occur. Problems may arise where the bonding strength becomes weak. In addition, with the recent increase in high-rise buildings and larger buildings, when assembly is completed and brought to the site, a place is needed to store it, and in addition, there is a problem in that it has to be transported several times in small quantities to the installation site, which is another problem of time and cost loss. This is coming to the fore. In order to fundamentally solve this problem, we have researched and developed a non-welding door frame that can be assembled on site. We have researched and developed three assembly methods: screw-type, insert-type, and protrusion-type. Non-welded door frames are small in size and easy to package, making them advantageous for domestic and overseas exports.

• Korean Journal of Optics and Photonics
• /
• v.16 no.4
• /
• pp.345-353
• /
• 2005

We proposed a new and cost-effective method fer assembling holographic pickup modules without any high resolution vision system. Assembling was accomplished by adjusting photodiode package only, leading to a low cost, holographic pickup module. Focus and tracking error signals were simply determined by comparing spot sizes and by using the 3 beam method, respectively, based on four-sectional holographic optical elements. In experiment, we assembled a hologram module and estimated performance of the proposed method fur a holographic pickup module used in compact disc system.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.688-693
• /
• 2007

Most frame structures cannot be manufactured in a single-piece form. Ideally, when a structure is built up by assembling multi pieces, assembly at the joints should be rigidly performed enough to have almost full stiffness, which is difficult for practical reasons such as manufacturing cost and time. In this research, we aim to develop a manufacturability-oriented compliance-minimizing topology optimization using a ground beam model incorporating additional zero-length elastic joint elements. In the present formulation, design variables control the stiffness of zero-length elastic joints, not the stiffness of beams. Because joint stiffness values at the converged state can be utilized to select candidate assembly locations and their strengths, the technique is extremely useful to design multi-piece frame structures. An optimal layout is also extracted based on the stiffness values.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.555-557
• /
• 2000

CBD(Component Based Development)는 미리 만들어진 검증된 부품을 합성, 조립하는 작업으로, 최근에 빠른 속도로 생겨난 카타르시스는 객체와 프레임워크로 CBD를 위한 완벽한 지원을 제공하는 차세대 방법론이다. 네트워크 환경과 인터넷의 보급으로 인한 인프라 구축과 다양한 방법론의 개발은 소프트웨어 부품화로써의 컴퍼넌트 기반 소프트웨어 개발에 대한 관심을 높이고 제반 여건을 조성하는 계기가 되었다. 또한 네트워크 기반의 분산 환경이 응용의 개발과 활용을 위한 표준 아키텍쳐로 자리잡아 가면서 네트워크 관리가 개별 응용으로서 뿐 아니라 대부분의 응용에서 하부 계층 지원 서비스로 요구되는 중요한 응용 도메인이 된다. 따라서 다수의 개발자들이 환경적 제약없이 네트워크 관리를 위한 응용 컴퍼넌트를 획득, 조립함으로써 요구되는 서비스를 구현할 수 있다. 그러므로 본 논문에서는 컴포넌트 소프트웨어 설계를 위한 방법론인 카타르시스를 사용하여 네트워크 관리 시스템(NMS)을 위한 컴포넌트를 설계하고 필요한 컴포넌트를 식별, 개발한다. 이를 통해 NMS를 위한 공용의 컴퍼넌트를 확보함으로써 체계적인 CBD 방법론에 의한 NMS 개발로의 표준화된 접근할 수 있다.

• Journal of Internet Computing and Services
• /
• v.9 no.5
• /
• pp.59-72
• /
• 2008

Computing systems in the modern era are expanding rapidly to include mobile-based businesses that make us of the various convergence distributed business process. This has lead to growing interest in the field of mobile embedded software development methodology, which has in turn lead to the proliferation of the embedded mobility. The use of CBD (Component Based Development) provides reusability, maintainability and portability, all of which are very important and focus issues to the business process. It also comes with the inherent productivity, quality and reliability of CBD. To make efficient use of CBD, though, clarified interface definitions for component integration are necessary. These definitions should be made up of collaborative hierarchical and horizontal architecture layers. Successful definitions should apply an effective framework made up of the architecture and process. In this paper, we describe an interface specification for small grained mobile embedded components(MEC) for the mobile embedded domain to meet maximum user requirements. We build and deploy the reconfigurable design patterns and components (in business domain categories) to make a component hierarchy and business logics for mobile embedded software. Proposed components specification plays a major role in development of the software for handling inconsistency in existing specification. It also includes plenty of specification information, using semantics and modeling based mechanisms to support business processes. We propose a development model of mobile embedded software using CBD for very complex and dynamic mobile business. We can apply it in a plug and play manner to develop the software. We verify that our framework supports very good productivity, quality and maintainability to meet the user's requirements in mobile business.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.04a
• /
• pp.507-512
• /
• 2000

본 논문에서는 통합 스트리밍 프레임워크 (ISSA)[1][2]의 주요 모듈인 전송 관리자의 구현에 대한 개발 경험을 소개한다. 전송 관리자는 ISSA에서 지원하는 다양한 형식의 멀티미디어 데이터를 네트워크의 전송에 알맞게 분해(packetization), 조립(depacketization)하는 기능과 패킷화된 미디어 데이터를 실시간으로 전달하는 역할을 수행한다. 이러한 기능은 RTP/RTCP[3][4] 프로토콜을 이용하여 구현되었으며, 코드 레벨에서의 이기종 플렛폼간 호환성과 네트워크의 투명성을 보장하도록 설계 되었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.1369-1371
• /
• 2011

효과적이고 체계적인 소프트웨어의 재사용을 위해서는 해당 도메인에 대한 공통된 자산을 먼저 개발해야 한다. 재사용을 위한 컴포넌트 집합은 복잡한 소프트웨어를 컴포넌트 단위의 구조로 분해하고 이를 다시 조립할 수 있도록 하여 생산성을 향상시키지만 광범위한 분석으로 인해 컴포넌트를 개발하는데 필요한 비용과 기간을 증가시키기도 한다. 이러한 문제점을 극복하기 위해 소프트웨어 제품 라인 공학을 적용하여 해당 도메인의 수요나 업무 수행을 만족하는 일련의 공통된 기능들을 이용하여 재사용할 단위인 핵심 자산을 구축하고 요구사항에 따라 목표 시스템을 단기간에 저비용으로 개발할 수 있다. 본 논문에서는 소프트웨어 제품 라인 공학을 통해 정의된 M&S프레임워크의 핵심 자산을 제시하고 이를 재사용해 기록장치 소프트웨어를 개발한 사례에 대하여 설명한다.