• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.181-185
• /
• 2003

the effect if atmosphere is more important in the West sea of Korea than in other seas because of shallow water and heat storage if the water. The serial oceanographic observation data and coastal station data from NFRID, and the atmosphere data from KMA were used in order to find out the relationship between them The highest water temperature, salinity and weather factor were recorded in Aug, and the lowest of them in Feb. As the water deepens, the maximum time leg in water temperature and the minimum time leg in salinity. Water temperature have the maximum in Oct, the minimum in Apr at 75m of the 311-07 station with 100m depth water temperature (WT)-air temperature, WT-precipitation (Preci.) and salinity (Sal)-wind speed (WS) were in direct proportion, but WT-WS, Sal-AT and Sal-Preci in inverse proportion Water temperature and salinity I-ave time leg at the same depth the maximum had more the delay of $2\~4$ months at a depth if 20 meters than at the surface in all stations except for salinity at 307-05.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.1
• /
• pp.1-11
• /
• 2012

Human thermal sensation based on a human energy balance model was analyzed in the study areas, the Changwon and Nanaimo sites, on clear days during thesummer of 2009. The climatic input data were air temperature, relative humidity, wind speed and solar and terrestrial radiation. The most effective factors for human thermal sensation were direct beam solar radiation, building view factor and wind speed. Shaded locations had much lower thermal sensation, slightly warm, than sunny locations, very hot. Also, narrow streets in the Nanaimo site had higher thermal sensation than open spaces because of greater reflected solar radiation and terrestrial radiation from their surrounding buildings. Calm wind speed also produced much higher thermal sensation, which reduced sensible and latent heat loss from the human body. By adopting climatic factors into landscape architecture, the human thermal sensation analysis method promises to help create thermally comfortable outdoor areas. The method can also be used for urban heat island modification and climate change studies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1753-1759
• /
• 2009

A weather radar as one of the remote sensing devices to analyze the weather phenomena receives the return echoes which consist of scattered electromagnetic wave signals from rain, cloud and dust particles, etc. These received Doppler weather spectra are analyzed to extract the various characteristic weather information. The mean wind velocity is one of the important weather parameters which can be obtained by a weather radar ed it may be useful in the prevention of weather hazards occurred by the abrupt shift of wind in small geographical scales such as microbursts. It is usually estimated by pulse pair method which is considered to be reliable and very efficient in the computational requirement. However, there are some problems in the accurate estimation of the mean velocity if Doppler spectra of weather signals appear to be asymmetric gaussian or multi-peak spectra. Therefore, in this paper, the problems in the mean estimation of asymmetric Doppler spectra are analyzed and the improved method is suggested.

• Fire Science and Engineering
• /
• v.22 no.4
• /
• pp.20-26
• /
• 2008

The performance of natural smoke ventilators in High-rise buildings was analyzed by investigating the stack effect depending on the wind velocities using CONTAMW tool. The results showed that the opening of smoke ventilators can influence on the stack effect in the building thus moving the position of the neutral plane toward the opened smoke ventilators. The outside wind velocities can move up the neutral plane toward the top of the building thus increasing pressure differentials at the bottom of the building. The smoke ventilators can maintain its normal performance without outside wind, however, strong outside wind can prevent natural smoke exhaust due to the infiltration of outside air at the ventilators.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.274-274
• /
• 2012

증발산량 관측은 오랜 기간 연구되어 왔으며, 미기상 관측 시스템의 최적화와 상호 공동비교 실험 및 자료 처리의 일관성을 유지를 위해 한국에는 KoFlux라고 하는 플럭스 네트워크가 2002년 1월에 구축되었다. 이를 시작으로 미기상 관측에 대한 관심이 많은 연구자들이 관측망 구축에 힘쓰고 있으며, 에디공분산 방법을 이용해 증발산량을 산정하고 있다. 에디 공분산 방법은 다른 방법에 비해 연직농도 차이가 적은 산림 위에서의 플럭스 값을 측정 할 수 있으며, 측정 시 식물 환경에 방해를 주지 않는 등의 장점이 있다. 하지만 자료 처리와 품질관리에 있어 연구자의 주관성에 의해 상당 부분 불확실성을 초래한다. 또한 다른 관측지점과의 일관적인 비교를 위해 좌표보정을 수행하며, 일반적으로 바람이 평평한 지역 위로 분다는 가정 하에 이루어진다. 좌표보정은 일반적으로 Planar Fit Rotation방법을 사용하며, 평판 분할은 지형에 따라 12개까지 분할하여 분석한다. 하지만 덕유산 플럭스관측 타워지점처럼 산지 특성이 뚜렷하고 1 m/s이하의 풍속 데이터의 빈도가 큰 경우 평판 분할 수의 제한이 발생한다. 이러한 문제를 해결하기 위해 좌표보정계수산정 방법에 따라 등간격의 평판분할 방법(Scenario A), 주풍향을 고려한 평판분할 방법(Scenario B)과 빈도에 의한 평판분할방법(Scenario C)으로 수행하였다. 또한 각 Scenario는 풍속의 제한 조건에 따라 CASE A(0.5 m/s 이상), CASE B(1.0 m/s이상)로 구분하여 분석하였다. 본 연구를 통해 제안 한 자료처리 절차는 첫째, 바람자료의 빈도 분석을 통한 지역특성 파악 둘째, 풍속제한 조건 설정 셋째, 바람과 수증기의 공분산 계산으로 요약된다. 덕유산 플럭스관측 타워지점의 경우 풍속 제한을 1.0 m/s이상에서 0.5 m/s이상으로 하향 조정하였으며, 평판 분할 방법은 Scenario C의 평판 수 12개를 채택하였다.

• Electric Engineers Magazine
• /
• s.335
• /
• pp.11-13
• /
• 2010

우리나라는 좁은 국토 면적에 비하여 삼면이 바다로 둘러싸인 지형적인 장점을 가지고 있어 해상풍력발전단지를 조성하는데 유리한 조건을 가지고 있다. 또한 해상풍력은 장애물이 적기 때문에 바람의 난류(불규칙적인 흐름)와 풍속변화가 적어 육상풍력보다 해상풍력의 발전효율이 1.4배 높으며, 일반적으로 1.5~2배 정도 발전량이 높은 것으로 알려져 해상풍력 개발에 박차를 가하고 있다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.6 no.1
• /
• pp.36-43
• /
• 1977

온도분포, 농도분포를 가미한 비압축성 유체의 기초방정식을 토출$\cdot$흡입이 있는 2차원 폐공간에 적용하고 시간공간에 차분근사로써 얻은 수치해에 대하여 서술했다. 이와같은 방법에 대해서는 미해결의 요소가 많이 있으나, 여기서는 토출풍속$\cdot$온도차$\cdot$격자수를 변화시킬 때의 해가 변화하는 모양을 계산예에 따라서 보고한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.185-196
• /
• 1988

In this study, a method of nonlinear dynamic analysis of suspension bridges subjected to random wind loads is pre.sented. The nonlinearity considered is the one due to the interaction between the motion of the bridge girder and the tertsion variation of the main cables. The equation of motion is formulated using a continuum approach. The coupling between the vertical and torsional motions are included in the analysis. The equation of motion is solved by using the mode superposition method. The analysis is carried out in the frequency domain utilizing the stochastic linearization technique on to the modal equations. In the linearization procedure, the nonlinear terms are approximated as linear ones with constant terms. The verification of the method has been performed on a case with four modal degrees of freedom. Example analyses are carried out on two suspension bridges for various wind speeds and wind force parameters. Numerical results indicate that, by including the nonlinearity into the analysis, the dynamic responses of the bridges, particularly in the vertical direction, change considerably.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.5
• /
• pp.291-300
• /
• 2013

Typhoon simulation method is widely used to estimate sea surface wind speeds during the typhoon periods. Holland (1980) model has been regarded to provide relatively better results for observed wind data. JTWC or RSMC best track data are available for typhoon modeling, but these data show slightly different because the data generation process are different. In this paper, a Newton-Raphson method is used to solve the two nonlinear equations based on the Holland model that is formed by the two typhoon parameters, i.e. the longest radius of 25 m/s and 15 m/s wind speeds, respectively. The solution is the radius of maximum wind speed which is of importance for typhoon modeling. This method is based on the typhoon wind profile of JMA and it shows that Holland model appears to fit better the characteristics of typhoons on the temporal and spatial changes than that of the other models. In case of using RSMC best track data, the method suggested in this study shows better and more reasonable results for the estimation of radius of maximum wind speed because the consistency of the input data is assured.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.77-84
• /
• 2017

Recently, interest in safety has been increasing in every area, especially in the field of transportation. The accurate evaluation of the stability of road facilities is needed to improve the level of safety in the field of transportation and the application of new technologies is required to reduce the number of natural disasters. In this study, the wind data were compared and analyzed according to the type of measurement, and an evaluation of the stability of road signs using the wind data was conducted. In addition, a stability plan to secure road signs was elaborated and its effect on the wind load was analyzed. It was found that the wind data measured by a mobile atmospheric observing system (MAOS) was 2.43 times bigger than that measured by the Korea meteorological administration (KMA) and road weather information system (RWIS). In terms of their stability, the road signs were susceptible to failure caused by gusty winds and it was found necessary to ensure their stability. In the future, it will be possible to evaluate the stability of road facilities using road line weather data and the application of wind load reduction technologies is expected to improve road safety.