• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.101-108
• /
• 2012

The purpose of this study is to establish a design method of tower service lift for offshore wind power system, as well as to conduct structure analysis of the service lift system. The service lift system will be built in the internal area of tower of the offshore wind power system. Design and structure analysis for the tower service lift system are conducted to clarify the stability and reliability of the system. Main objective of the design is to secure sufficient capability of transportation of workers and equipment with satisfactory performance within the designed tolerance limit. Total deformation and equivalent stress of the lift system by external load are examined using the results of structure analysis.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.615-621
• /
• 2007

Wind power generation is one of the promising gateways that will solve the energy crisis in the future. The wind power generator studied so far is limited to static interpretation in the areas related to tower. This study broadly sets the form of tower as tubular and jacket, identifies the characteristics of each and aims to find and apply their trend to in actual design and manufacturing process. This paper identified the resonance frequency of tower at each mode and studied their features. Furthermore, this study identified the characteristics of the load that occurs in operation and the effect of additional mass incurring when installed in sea, and it compared the two types of tower and was able to predict their trend.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.4-6
• /
• 2008

본 논문에서는 2.5MW급 풍력터빈에 적용된 이중여자 권선형 유도발전기 제어를 위한 풍력발전시스템의 핵심요소인 전력변환장치 제작기술과 풍력발전시스템 제어를 위한 요소기술에 대해 기술한다. 2.5MW급 풍력터빈을 계통연계하기 위해서는 풍력제어기와 컨버터를 설계하고 상호 인터페이스등을 고려하여 적절한 풍속조건에서 계통측에 발전전력을 전달하여야 한다. 또한, 최근 계통 사업자측에서 요구하는 Grid-code에 대응하기 위한 제어알고리즘을 설계하여야 하고, 타워의 진동억제를 위한 축진동 억제 알고리즘 등을 추가로 전력변환장치에 적용하여야 한다. 따라서 본 논문에서는 2.5MW급 풍력터빈용 PCS개발을 위한 각종 제어알고리즘과 H/W설계기술에 대해서 기술한다.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.3
• /
• pp.205-215
• /
• 2017

This study presents an example of conceptual design for hollow circular section multi-column tower system subjected to 10MW level wind load by introducing a method based on member utilization that examine both structural stability and economical efficiency. The basic assumptions for the proto type of a multi-column tower that can replace a single-cylinder tower were suggested and structural models were constructed following the assumptions and analyzed for identifying member forces. Based on the calculated member strengths and acting loads, the member utilization of the proposed multi-column tower structures were calculated for axial force, shear, bending and torsion and evaluaed for suitability as a wind tower. Design parameters such as steel tube dimensions, slenderness ratio, and number of floors for braces was proposed in the acceptable range of member utilization for conceptual design of multi-column wind towers.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.4
• /
• pp.50-54
• /
• 2012

Wind-power generation, which is recently drawing attention as one of renewable energies across the world, has been developed mainly by Europe. As the demand for the wind-power generation rose and the amount of wind-power generation increased, the studies on megawatt-class wind-power system have been active, and the use of composite with such properties as less weight, more strength, anti-corrosion and environment-friendliness has required gradually. In other word, wind turbine tower will be required to be lighter, more reliable and more consistent. Therefore it is necessary to lose weight of the wind turbine tower. This points squarely toward hybrid/composite tower production growing. It is important to note however that hybrid/composite tower production as it is today is flawed and that there are ways to improve greatly on the performance of these towers in manufacturing process and in their in-service performance. Through this, we have some detail on the current process and its advantage of cost and weight of towers.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.185.2-185.2
• /
• 2010

With the development of wind industry, the rated power of wind turbine also increase gradually. Accordingly, the size of wind turbine tower becomes larger and larger. The tower base diameter of 2MW wind turbine is about 4m. Larger tower is expected for 4MW or 5MW turbine. Due to limitation of transportation, new type of tower with smooth transportation and effective cost is needed. In this work, a hybrid tower consisting of steel and concrete is designed and analyzed. The optimum ratio of steel and concrete of hybrid tower are calculated as well as the thickness of the concrete part. Different FE analysis including modal analysis, buckling analysis and fatigue analysis are performed to check the design of hybrid tower comparing with the steel tower. Redesign is also expected after various analysis.

• The magazine of the Korean Society for Advanced Composite Structures
• /
• v.6 no.2
• /
• pp.47-56
• /
• 2015

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1885-1889
• /
• 2006

제주지역은 대륙과 해양을 연결하는 요충지로서 한라산을 중심으로 동서사면은 $3{\sim}5^{\circ}$의 완만한 경사를 이루고 있다. 연평균 강우량은 1,975mm로서 국내 최다우 지역이나 제주도의 지질 특성상 도내 대부분의 지역이 투수성이 높은 다공질 현무암으로 구성되어 있는 관계로 지표수의 발달이 미약한 반면 지하수가 풍부하게 부존되어 있으며 기저지하수, 준 기저지하수, 상위지하수, 기반암지하수로 이루어져 있다. 최근 우리나라의 교토의정서 비준으로 인한 온실가스 감축이 불가피함에 따라 대체 재생가능한 에너지를 이용한 풍력발전시대가 도래하고 있으며, 제주 행원풍력발전단지에 설치된 총 15기 발전장치의 현실성과 경제성 입증을 통해 제주지역의 풍력에너지를 이용한 지하수 취수시스템을 제안하였다. 본 연구는 제주, 고산, 서귀포, 성산포지역에 대한 제주지방기상청 연평균 풍속자료$(2004{\sim}2005)$를 통하여 대상지역내 적용 가능한 로터(Roter), 나셀(Nacelle), 타워(Tower), 발전기를 포함한 발전장치를 선정하였으며, 공기역학적(Aerodynamic)특성에서 전기에너지로 변환한 풍력에너지를 지하수 취수시스템으로 적용하기까지의 전력공급절차를 도출하였다. 또한 생산되어진 풍력에너지 용량에 적용 가능한 수중.육상모터펌프를 산정하여 '제주도 지하수개발.이용시설 설치 및 관리기준(2004)'에서 제시한 구조도를 바탕으로 대상지역내 지하수위를 고려한 지하수 취수시스템을 도시하였다. 제주도는 지형 및 지질적인 특성상 수자원을 지하수에 의존할 수밖에 없는 특수한 지역이므로 2002년말 통계를 살펴보면 생활용, 공업용, 농업용으로 각각 57만$m^2$, 11만$m^2$, 56만$m^2$를 포함한 1일 최대 124만$m^2$의 지하수를 사용하고 있다. 따라서 풍력에너지를 이용한 지하수 취수시스템을 도입하여 재생가능한 에너지이용 효과와 세계인이 공감하는 청정한 관광자원으로 활용 가능할 것이라 판단된다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.2
• /
• pp.115-120
• /
• 2014

In this study, a module is developed for modeling and analyzing dynamic behavior of a wind turbine using RecurDyn, which is a commercial multi-body dynamics software developed by FunctionBay, Inc. The wind turbine consists of tower, nacelle, hub and blades. Tower and blades are regarded as flexible bodies for considering elastic effect using beam theory and spring force. In this paper, a constant speed wind was assumed and aerodynamic force is modeled using BEM theory. Dynamic analysis applying this aerodynamic force is carried out. To verify the validity of analysis results, these results are compared to those of GH-Bladed which is a commercial software for analyzing wind turbine system distributed by Garrad Hassan.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2272-2278
• /
• 2015

Recently the importance of renewable energy is stood out regarding to the international concern about global environmental issues. Wind power is beginning to receive attention as one of renewable energy, and world-wide researches about wind power are being carried out. In the wind power system, tower structure plays an important roles for continuous and stable generation of electricity. Researchers use various analytical models to research and develop about tower structures. In this study, the effects of natural frequencies of various wind turbine tower models have been analyzed. It is possible to simplify the detailed parts of models by using modified tower unit weight since the results of 1st natural frequency show that the difference is only 0.14%. Since the difference in natural frequency is greater than 10%, according to the boundary condition, the simple fix end support is not appropriate to represent the real structure of the tower. It is expected that the result of this study may be utilized to establish the criterion about appropriate modelling method.