• The KIPS Transactions:PartC
• /
• v.12C no.5 s.101
• /
• pp.709-716
• /
• 2005

QoS is an important requirement of the FTTH (Fiber To The Home) subscriber in access network using E-PON (Ethernet Passive Optical Network). In this research, we describe the structure of the access network and propose a bandwidth guarantee scheme for subscriber and service according to the requirements of the subscriber, service and system. This scheme uses two kinds of the classification table, which are called 'service classification table' and 'subscriber classification table.' Using the classification table, we can identify the flow of the subscriber and service. Also, we compute the number of hash table entry to minimize the loss ratio of flows using the M/G/k/k queueing model. Finally, we apply the DRR scheduling through virtual queueing per subscriber instead of the aggregated class.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.9
• /
• pp.1177-1188
• /
• 2002

To classify real time Lead pin images in this paper, The image acquisition system was composed to C.C.D, image frame grabber(DT3153), P.C(PentiumIII). I proposed image processing algorithms. This algorithms were composed to real time monitoring, Lead Pin image acquisition, image noise deletion, object area detection, point detection and pattern classification algorithm. The raw images were acquired from Lead pin images using the system. The result images were obtained from raw images by image processing algorithms. In implemental result, The right recognition was 97 of 100 acceptable products, 95 of 100 defective products. The recognition rate was 96% for total 200 Lead Pins.

• Journal of Aerospace System Engineering
• /
• v.13 no.5
• /
• pp.24-31
• /
• 2019

In this study, we analyzed the cause of the burn out phenomenon in the power distribution system for aircraft and proposed the improvement method. The power distribution device for aircraft has an AC and DC, and there is a rectifier between the two devices. The capacitors in the power board burn out when the power is turned on and off. The main reason for this is the excessive voltage caused by the inductance built into the rectifier. The cases that can cause a failure are classified. The impact was analyzed and the solution was established through the experimental method.

• Information Systems Review
• /
• v.10 no.3
• /
• pp.289-311
• /
• 2008

This study is a development of quality scale and a measurement of quality levels for the Hospital Information System(HIS) used in the hospital industry. This study is to provide decision-making guidelines for hospital managers, system analysts, and software designers, and to provide feedback for the users' information needs. The target people of the study were medical doctors, nurses, pharmacists, and clerical staff. The service contexts of usability were diagnosis/treatment, nursing, medicine preparation, and treatment fee receipt/claim. The quality factors were the efficiency, effectiveness, and satisfaction of IS09241-11. This study shows that the current domestic HISs are mostly based on patient diagnosis/treatment and treatment fee accounting, and that other quality scales are necessary according to different job categories, specializations, positions, and service domains. Especially, the low quality of HIS was found in the abnormal service processing, information sharing by outside institutions, and standardization. It may be added that the HIS should be improved and developed in these respects.

• Proceedings of the Korea Society of Costume Conference
• /
• 2001.04a
• /
• pp.50-51
• /
• 2001

많은 소비자들이 가치지향적인 의사결정을 할 때 제품의 품질을 매우 중요한 요소로 생각하며, 제품구매시 불완전한 정보 상황에서 빈번히 제품품질의 지표로서 가격을 이용한다고 한다(Peterson & Wilson. 1985). 이와 관련하여 시장에서의 실제 가격과 객관적 품질과의 관계를 분석하여 소비자의 효율성을 파악한 연구가 각국에서 이루어져 왔으나, 패션제품에 관한 가격과 객관적 품질과의 관계에 관한 연구는 국내 외적으로 매우 미흡한 실정이다. 따라서 본 연구의 목적은 1990년대 한국과 미국 패션시장의 가격과 객관적 품질간의 상관관계를 비교 분석함으로써 양국 패션제품의 품질수준을 비교해 보 는데 있다. 본 연구의 결과를 통해 가격이 제품품질의 지표가 될 수 있는가를 파악할 수 있을 것이다. 이를 위해 본 연구에서는 다음과 같은 연구문제를 설정하였다. 첫째, 한국과 미국 패션제품 시장의 가격과 품질의 상관관계는 전체적으로 어떠한 차이가 있는가\ulcorner 둘째, 한국과 미국 패션제품의 가격과 객관 적 품질의 상관관계가 패션산업범주에 따라 어떠한 차이가 있는가\ulcorner 마지막으로, 본 연구의 결과와 같은 제품의 품질에 대한 정보탐색으로부터 얻을 수 있는 한국과 미국 소비자의 구매이득은 어느 정도인가\ulcorner 본 연구를 위한 내용분석에 이용된 자료는 양국의 소비자의 권익보호를 위한 중립적 정보원에서 발간하고 있는, 한국의 <소비자 시대>와 미국의 에 개 재 된 1990년부터 1999년까지 의 상품비교테스트 정보중에서 패션제품군에 관련된 자료를 토대로 하였다. 수집된 자료는 한국의 36개 패션제품군, 470개 제품과, 미국의 40개 패션제품군. 692개의 패션 제품이었으며, 패션산업범주는 여성복, 남성복, 유니 섹스 의류, 스포츠 의류, 유.아동복, 언더웨어. 잡화. 제화류, 침장류, 섬유직물, 화장품. 학생복 등 11 가지 산업범주로 분류하였다. 본 연구의 결과를 요약하면 다음과 같다. 첫째, 한국과 미국 패션제품의 지난 십년간의 가격 과 품질의 상관관계는 매우 약한 정(+)의 상관을 가지고 있었다. 한국패션제품의 전체 서열상관계수의 평균은 0.091이었고, 미국의 상관계수 평균은 0.192였 다. 상관계수의 수치만으로 볼 때 한국보다는 미국 패션제품의 가격과 품질간의 상관관계가 조금 높게 나타났으나, 양국간 통계적인 차이는 없었다. 또한, 한국 패션제품의 경우에는 제품군의 가격대별 상관관계를 살펴보았는데, 그 결과 1만원 미만의 저가 제품군과 330만원이상의 고가의 제품군의 경우 부(-)의 상관계수를 나타냈다. 둘째. 1990년대 한국과 미국 패션시장의 가격과 품질간의 상관계수의 범위는 제품군별. 산업범주별 로 상이한 분포를 보이고 있었다. 패션제품군별로 보 면, 한국의 경우는 가장 높은 '여행용가방(r = 0.707)' 에서 가장 낮은 '자외선 차단화장품(r = -0.58)'까지, 그리고 미국 패션제품군의 상관계수의 범위는 '팬티 스타킹'의 0.820에서 '남성용 런닝슈즈'의 -0.472까지의 분포를 나타냈다. 마지막으로, 제품의 가격과 품질에 대한 정보를 소비자가 알 경우 얻을 수 있는 소비자의 구매이득 을 추산한 결과 패션제품시장에서 완전한 품질정보를 가지고 있다고 가정한 '현명한 사람'은, 최고가격의 제품만을 구입한다고 가정한 '부유한 사람들'의 구입방식에 비해 최고 좋은 품질의 상품을 총 지불액의 비율로 보아, 한국의 소비자는 약 50% 정도를, 미국의 소비자는 약 91%나 되는 액수를 절약하여 구매할 수 있는 것으로 나타났다. 이상의 본 연구의 결과를 종합하여 볼 때 한국과 미국 모두 제품군별, 그리고 산업범주별로 상관관계가 차이를 보이고 있어, 양국의 소비자들이 패션제품 의 품질을 평가함에 있어 오로지 가격에 대한 정보만을 이용하는 것은 위험하고 비합리적인 구매의사 결정이라고 볼 수 있다. 따라서 소비자가 좀 더 합리적인 구매의사결정을 하여 재정적 손실을 막기 위해서는 가격과 품질에 관한 신뢰있는 정보의 탐색이 반드시 필요하다고 본다.

• Korean small business review
• /
• v.43 no.4
• /
• pp.95-115
• /
• 2021

Quality is an important factor influencing organizational performance, so it should be possible to accurately and effectively measure the quality perceived by members. The Consumer Cooperative can be seen as a retail industry by industry classification, and there are various studies based on the dimension of retail quality, but compared to the general retail industry, few studies have been conducted based on the quality level perceived by members. The purpose of this study is to develop quality dimensions and sub-attributes by analyzing in detail and elaborately how the quality of cooperative is viewed from the perspective of members who are both consumers and owners. To this end, the quality dimension of cooperative quality is needed to be newly developed and quality components are demonstrated based on previous studies on the quality dimension. The quality dimension of the cooperative was developed through prior research to suit the value of the cooperative in product, service, and social responsibility, and a survey was conducted to demonstrate the four major cooperative members in Korea. Through this, sub-dimensions were constructed and the quality dimension of the high-order model was demonstrated through exploratory factor analysis and confirmatory factor analysis. It aims to discover key management elements in terms of quality management and provide practical implications to management.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.229-238
• /
• 2019

Various wood defects occur during tree growing or wood processing. Thus, to use wood practically, it is necessary to objectively assess their quality based on the usage requirement by accurately classifying their defects. However, manual visual grading and species classification may result in differences due to subjective decisions; therefore, computer-vision-based image analysis is required for the objective evaluation of wood quality and the speeding up of wood production. In this study, the SIFT+k-NN and CNN models were used to implement a model that automatically classifies knots and analyze its accuracy. Toward this end, a total of 1,172 knot images in various shapes from five domestic conifers were used for learning and validation. For the SIFT+k-NN model, SIFT technology was used to extract properties from the knot images and k-NN was used for the classification, resulting in the classification with an accuracy of up to 60.53% when k-index was 17. The CNN model comprised 8 convolution layers and 3 hidden layers, and its maximum accuracy was 88.09% after 1205 epoch, which was higher than that of the SIFT+k-NN model. Moreover, if there is a large difference in the number of images by knot types, the SIFT+k-NN tended to show a learning biased toward the knot type with a higher number of images, whereas the CNN model did not show a drastic bias regardless of the difference in the number of images. Therefore, the CNN model showed better performance in knot classification. It is determined that the wood knot classification by the CNN model will show a sufficient accuracy in its practical applicability.

• Korean Chemical Engineering Research
• /
• v.48 no.4
• /
• pp.475-482
• /
• 2010

In this work, soft sensor based on image anlaysis is proposed for quantitatively estimating the visual appearance of manufactured products and is applied to quality monitoring. The methodology consists of three steps; (1) textural feature extraction from product images using wavelet transform, (2) numerical estimation of the product appearance through projection of the textural features on subspace, and (3) use of latent variables of textural features (i.e., numerical estimates of product appearance). The focus of this approach is on the consistent and quantitative estimation of continuous variations in visual appearance rather than on classification into discrete classes. This approach is illustrated through the application to the estimation and monitoring of the appearance of engineered stone countertops.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.956-958
• /
• 2012

In this paper proposes improve the quality of the GIS software, GIS software quality metrics that can be measured based on ISO/IEC 9126.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.5
• /
• pp.245-260
• /
• 2006

The e-learning market in korea has been growing rapidly over the past several years. We selects the variables well matched to service quality of e-learning site on the basis of independent variables of this study, sets the models as adding the factors newly noticed such as convenience of site use in e-learning. We also see the significance of the relationships between service quality of e-learning site, personal performance, customer satisfaction and customer's reuse intention.