• 프린팅코리아
• /
• s.13
• /
• pp.144-147
• /
• 2003

인쇄품질을 보증하는데 가장 중요한 것 중의 하나는 색 관리다. 색 관리는 발주자가 의도한대로 인쇄를 해야하기 때문에 매우 중요한 문제이지만, 인쇄를 위한 여러 과정을 거치면서 색이 조금씩 변동됨으로써 발주자가 의도한 색과 멀어진 경우도 있다. 최근에는 인쇄공정의 디지털화로 인해 데이터 입고에서부터 디지털화가 이루어지고 있으며, 이것에 대해서는 전 공정에서 인쇄기의 색에 기초해서 만들어진 '색 기준'에 의해 컬러매니지먼트가 필요하게 되었다. 앞으로는 어느 공정에서 색을 맞추더라도 다른 공정에서 색이 변동되지 않고, 또 '색 기준'에서의 관리를 현장만이 아니라 영업 담당자도 이해해 효율화됨으로써 영업활동을 하는 데에도 필요하게 되었다. 이에 일본의 사례를 들어 CTP 운용을 위한 컬러매니지먼트에 대해 알아보았다.

• Journal of Industrial Convergence
• /
• v.20 no.2
• /
• pp.87-94
• /
• 2022

The purpose of this study verified the relationship between parents' perception of program value, service quality, and service satisfaction who participate in special sports activities. For this a survey was conducted with parents participating in the program at welfare facilities and private institutions in the metropolitan area. The survey was directly visited by the researcher, and 236 copies of data were collected and used for analysis. For the collected data, the causal relationship was verified through descriptive statistics, factor analysis and reliability analysis, correlation analysis and regression analysis. As a result of the analysis, the following conclusions were obtained. First, it showed a significant influence in tangibility, reliability, empathy, and guarantee in the relationship between program value perception and service quality. Second, in the relationship between program value perception and service satisfaction, significant influence was shown on user satisfaction and performance satisfaction. Third, in the relationship between service quality and service satisfaction, it showed a significant influence on user satisfaction and performance satisfaction.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.311-318
• /
• 2005

Transparency on the Total System Performance Assessment (TSPA) is the key issue to enhance the public acceptance for a permanent high level radioactive repository. To approve it, all performances on TSPA through Quality Assurance is necessary. The integrated Cyber R&D Platform is developed by KAERI using the T2R3 principles applicable for five major steps in R&D's. The proposed system is implemented in the web-based system so that all participants in TSPA are able to access the system. It is composed of FEAS (FEp to Assessment through Scenario development) showing systematic approach from the FEPs to Assessment methods flow chart, PAID (Performance Assessment Input Databases) showing PA(Performance Assessment) input data set in web based system and QA system receding those data. All information is integrated into Cyber R&D Platform so that every data in the system can be checked whenever necessary. For more user-friendly system, system upgrade included input data & documentation package is under development. Throughout the next phase R&D, Cyber R&D Platform will be connected with the assessment tool for TSPA so that it will be expected to search the whole information in one unified system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.7-8
• /
• 2015

In MSC $95^{th}$ commitee, the Guideline on software quality assurance and human-centred design for e-navigation was approved as a circular. After that, the practical guidance to apply the guidance for marine-industry is developing. This guidance presents detailed actions which is done with the software development life-cycle and it provides templates of basic outcomes of the detailed actions. In April 2015, the "e-navigation SQA and HCD Guideline Workshop 2015" was held. There was discussions about the improvement and application plans of the guideline. Also, various opinions of marine-industry about IMO SQA were gathered and how to apply to the marine-industry with harmonization of SQA and HCD was discussed. This paper subscribes the future work to improve the guideline discussed on the workshop.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.751-758
• /
• 2021

Munitions must be analyzed to identify any risks for quality assurance in development and mass production. Risk identification for parts, compositions, and systems is carried out through failure mode effects analysis (FMEA) as one of the most reliable methods. FMEA is a design tool for the failure mode of risk identification and relies on the RPN (risk priority number). FMEA has disadvantages because its severity, occurrence, and detectability are rated at the same level. Fuzzy FMEA applies fuzzy logic to compensate for the shortcomings of FMEA. The fuzzy logic of Fuzzy FMEA is to express uncertainties about the phenomenon and provides quantitative values. In this paper, Fuzzy FMEA is applied to the failure mode of a rotorcraft landing system. The Fuzzy rule and membership functions were conducted in the Fuzzy model to study the RPN in the failure mode of a landing system. This method was selected to demonstrate crisp values of severity, occurrence, and detectability. In addition, the RPN was obtained. The results of Fuzzy FMEA for the landing system were analyzed for the RPN and ranking by fuzzy logic. Finally, Fuzzy FMEA confirmed that it could use the data in quality assurance activities for rotorcraft.

• Journal of Service Research and Studies
• /
• v.11 no.1
• /
• pp.45-58
• /
• 2021

Requirements engineering can be seen as proceeding with various processes and activities such as extraction, analysis, specification, management, and verification without temporal and spatial constraints in the development environment of information systems that are becoming large and decentralized. Developing requirements well and conducting continuous evaluation and management is the shortcut to success in project management, and it is recognized as a very important matter in relation to requirements in the information system audit. When we conduct information system audit and conducting projects subject to audit, we need to improve the required engineering aspect. Therefore, this study derives inspection items suitable for the target project by referring to the audit inspection manual and audit inspection guide when conducting the current audit, and relates to the required engineering aspect among the contents of the inspection guide for each business type that is the basis for deriving the inspection items were derived for each audit point/audit area for the project management and quality assurance project type corresponding to the inspection items. The suitability of the extracted occupation items was verified through a questionnaire survey by experts.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.500-503
• /
• 2008

소프트웨어 정밀 검사는 품질 보증 활동 중 결함 제거율이 가장 높은 것으로 알려져 있지만, 비용과 시간이 가장 많이 소요되는 활동이다. 모든 프로젝트는 한정된 비용과 일정 제약을 가지고 있으므로 정형화된 프로세스로 이루어진 소프트웨어 정밀 검사를 프로젝트에서 산출된 모든 컴포넌트에 대하여 수행하는 것은 현실적으로 어렵다. 따라서 소프트웨어 정밀 검사의 효과를 극대화 하기 위한 효율적인 접근 방법이 필요하며, 본 논문에서는 효율적인 소프트웨어 정밀 검사를 수행하기 위하여 요구사항 크기와 복잡도, 설계 복잡도, 코드 복잡도 평가에 기반한 컴포넌트 우선순위 선정 기법을 제안하고 평가한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04c
• /
• pp.64-66
• /
• 2003

최근 많은 기업들이 조직의 프로세스 능력 수준을 향상시키기 위해, 표준 프로세스를 정립하고 개발 과제에 적용하고 있다. 이는 체계적인 개발 활동을 통해 우수한 품질의 제품 생산을 유도하고 있지만, 개발 과제의 특성을 고려하지 않고 적용되고 있어 프로젝트 관리상에 많은 문제점을 발생시킨다. 본 논문에서는 조직의 특성, 개발 과제의 특성 등을 고려하여 표준 프로세스를 조정하는 기법을 제시하고, 이를 활용하여 개인 프로세스를 생성하는 도구에 대한 설계를 제안한다. 또한, 생성기를 통해 조정된 개인 프로세스들과 표준 프로세스와의 완전성, 일관성 체크를 통해 생성기의 품질을 보증한다. 본 논문에서 제안된 개인 프로세스 생성기는 조직의 자원을 최적으로 할당하여 불필요한 일정 낭비를 예방하고, 효율적인 프로세스 적용을 통해 프로젝트의 성공을 제공한다.

• Korean Management Science Review
• /
• v.13 no.2
• /
• pp.177-191
• /
• 1996

Quality is defined as several terms of fitness for use, conformance to requirements or specification, and loss of social effect. And the quality can be classified into design, production and service quality according to its formation of product (or servece). To be satisfactory product, the product must be controlled to maintain the specified level of quality at the whole life cycle of R&D step through disposal step. And the wrong design is one of the great source of cost. Therefore, the quality assurance on the R&D step is very important. This paper suggests a general procedure for the R&D quality assurance and discusses the methods for the reliable design. And a telecommunication equipment is considered as an applied example. Finally, it is discussed some subjects on the R&D quality assurance as further researches.

• Current Industrial and Technological Trends in Aerospace
• /
• v.4 no.2
• /
• pp.76-85
• /
• 2006

최근 정보화 사회의 진전과 함께 각계각층에서 컴퓨터의 활용이 크게 늘어나고 있으며 따라서 소프트웨어를 이용하여 각 산업 활동이 신속성, 효율성, 생산성 및 편리성 등의 측면에서 많은 효과를 보게 됨에 따라 소프트웨어의 비중은 날로 높아지고 그 중요성도 새롭게 인식되고 있다. 국내 민간분야에서의 소프트웨어 개발은 다양한 민간규격(ISO/IEC-12207, ISO/IEC-9126 등)을 따라 수행되고 있으며 국방분야에서는 “소프트웨어 개발 프로세스 (방위사업청 지침 2006-9, 2006.1.25)”이 소프트웨어 개발지침으로 최근 채용되어 개발에 적용되고 있다. 본 논문에서는 “소프트웨어 개발 프로세스 (방위사업청 지침 2006-9, 2006.1.25)”의고찰을 통하여 소프트웨어 개발 프로세스의 요구조건을 소개 하였으며, 국방사업에서의 소프트웨어 품질관리 방법에 대하여 살펴보았다.