• Geotechnical Engineering
• /
• v.8 no.2
• /
• pp.81-96
• /
• 1992

This paper dealt with the influence of experimental error generated inevitably during performing experiments on the granular soil behaviour analysis selecting Lade's Single Work-Hardening constitutive model. Several isotropic compression-expansion tests and a series of drained conventional triaxial tests with various confining pressures for Baekma river sands were performed and the values of parameters for the above model were determined using computer program developed for this study based on regression analysis. By finding the range of the upper and lower bound for deviator stress and volumetric strain versus axial strain dependant on the increase and decrease of the standard deviation from mean value of parameters, sensitivities of all the parameters were examined. Practical use of program to determine the parameters and capability to predict the behaviour of granular soil by Lade's Single Work -Hardening model verified.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.176-186
• /
• 1998

Pure Pt, Co and their alloy thin films with three different compositions (Pt66-Co34, Pt40-Co60 and Pt18-Co82) were deposited on Si(100) wafers and proposed as a set of certified reference materials (CRM) for the quantification and standardization of surface compositional analysis. The compositions of the binary alloy thin films were controlled by in-situ XPS analyses and the certified compositions of the films have been determined by ICP-AES and RBS analyses after thin film growth. Through comparison of the compositions determined by in-situ XPS with those by ICP, relatively accurate compositions could be obtained with a matrix effect correction. Standard deviations of XPS and AES round robin tests with the Pt-Co alloy thin films were large up to about 4%. On the other hand, the average compositions of the Pt-Co alloy thin films by two methods were in a good agreement within 1%. The formation of a Pt rich surface layer by ion beam sputtering indicates that the surface modification by preferential sputtering must be understood for a better compositional analysis.

• Journal of Korean Society of Forest Science
• /
• v.26 no.1
• /
• pp.7-12
• /
• 1975

The sap uses of Korean sugar maple, Acer mono Max., "Gorosoe-namoo," the most abundant growing stock in maples, for a medical beverage at every early spring have had the long history in Korea. The sap of Korean sugar maple (the maple) was prepared with a unique tapping method from the trees during the sap flow season of 1974, measured the sugar content in $2.6^{\circ}$ to $3.3^{\circ}Brix$ of sugar on average and the sugar concentration of the sap was enough for a sweetener resource comparing with those of American sugar maples in literature. The color of sirup was very dark and the color index was 2.69 for the sirup of $15.3^{\circ}Brix$ having 10 hours evaporation and 3.380 for the standard sirup, as shown in Table 3 and Figure 2, due to the prolonged evaporation in deep aluminium or stainless steel kettles. The alcohol extractives of standard sirup has the light color and the residue reddish brown and the absorption spectra have the maxima in wave length of 350 nm, 1,000 nm, 1,170 nm, 1,400 nm and 1900 nm, as shown in Figure 3. The extractives of ethanol and monoethanolamine mixture (97:3, v/v) has dark red and the residue darker redish brown.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.4
• /
• pp.210-214
• /
• 1998

In general the concentration of uranium in natural water such as fresh water and sea water is in the range of 0.01∼5 ppb, therefore trace analytical technique is required. The aim of present work is to compare a direct and preconcentration methods by evaporation and to investigate rapid and accurate trace analysis of uranium in groundwater using Instrumental Neutron Activation Analysis (INAA) which are sensitive and nondestructive method. Identification of analytical procedure was carried out using uranium standard solution of the range of 0.5∼100 ppb. In the given concentration, the deviation of calibration curve was less than 2%, and the standard deviation of measured values at each concentration was the range of 2∼12%. The difference of U content with sampling time for the same sample site was about 10.3%. Using this established method, the concentrations of uranium in samples collected at the 17 spring of Choongchung areas were found to be in the range of 1∼80 ppb.

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.581-586
• /
• 2000

Separation and coulometric titration method were applied for the determination of plutonium content in samples of PWR spent fuel. Plutonium was separated on an anion exchange(AG MP-1) column and determined by the controlled-potential coulometric titration. In this study, we discussed some experimental conditions related to the separation and determination of plutonium in PWR spent fuel samples. Average accuracy(recovery of plutonium) for the determination of 0.230∼3.02 mg plutonium standard was 99.36%. Average precision(relative standard deviation, RSD) for the determination of 0.250∼0.450 mg plutonium in PWR spent fuel samples was 0.38%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.244-253
• /
• 2016

The QRS complex of ECG signal represents the depolarization and repolarization activities in the cells of ventricle. Accurate informations of $QRS_{onset}$ and $QRS_{offset}$ are needed for automatic analysis of ECG waves. In this study, using the amount of change in the QRS complex voltage values and the distance from the $R_{peak}$, we determined the junction point from Q-wave to R-wave and the junction point from R-wave to S-wave. In the next step, using the integral calculation based on the connection point, we detected $QRS_{onset}$ and $QRS_{offset}$. We use the PhysioNet QT database to evaluate the performances of the algorithm, and calculate the mean and standard deviation of the differences between onsets or offsets manually marked by cardiologists and those detected by the proposed algorithm. The experiment results show that standard deviations are under the tolerances accepted by expert physicians, and outperform the results obtained by the other algorithms.

• Journal of Bio-Environment Control
• /
• v.28 no.1
• /
• pp.78-85
• /
• 2019

This study was designed to examine the performance of an aspirated radiation shield(ARS), which was made at the investigator's lab and characterized by relatively easier making and lower costs based on survey data and reports on errors in its measurements of temperature and relative humidity. The findings were summarized as follows: the ARS and the Jinju weather station made measurements and recorded the range of maximum, average, and minimum temperature at $2.0{\sim}34.1^{\circ}C$, $-6.1{\sim}22.2^{\circ}C$, $-14.0{\sim}15.1^{\circ}C$ and $0.4{\sim}31.5^{\circ}C$, $-5.8{\sim}22.0^{\circ}C$, $-14.1{\sim}16.3^{\circ}C$, respectively. There were no big differences in temperature measurements between the two institutions except that the lowest and highest point of maximum temperature was higher on the campus by $1.6^{\circ}C$ and $2.6^{\circ}C$, respectively. The measurements of ARS were tested against those of a standard thermometer. The results show that the temperature measured by ARS was lower by $-2.0^{\circ}C$ or higher by $1.8^{\circ}C$ than the temperature measured by a standard thermometer. The analysis results of its correlations with a standard thermometer reveal that the coefficient of determination was 0.99. Temperature was compared between fans and no fans, and the results show that maximum, average, and minimum temperature was higher overall with no fans by $0.5{\sim}7.6^{\circ}C$, $0.3{\sim}4.6^{\circ}C$ and $0.5{\sim}3.9^{\circ}C$, respectively. The daily average relative humidity measurements were compared between ARS and the weather station of Jinju, and the results show that the measurements of ARS were a little bit higher than those of the Jinju weather station. The measurements on June 27, July 26 and 29, and August 20 were relatively higher by 5.7%, 5.2%, 9.1%, and 5.8%, respectively, but differences in the monthly average between the two institutions were trivial at 2.0~3.0%. Relative humidity was in the range of -3.98~+7.78% overall based on measurements with ARS and Assman's psychometer. The study analyzed correlations in relative humidity between the measurements of the Jinju weather station and those of Assman's psychometer and found high correlations between them with the coefficient of determination at 0.94 and 0.97, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.8
• /
• pp.29-40
• /
• 2017

In this study, the dynamic compaction method was selected by analyzing field situation, soil condition data and compaction test characteristics of the special selected soils, and the compaction method for using the selected soils as the site restoration soil of the ${\bigcirc}{\bigcirc}$ city non-sanitary landfill maintenance project. The N value in the standard penetration test (SPT) before and after dynamic compaction increased by an average of 89% over the range 12~18, and the allowable bearing capacity of the plate bearing test (PBT) was ranged $150{\sim}227kN/m^2$, at least 80% higher than that before test. As a result, it can be seen that the same tendency as the dynamic compaction effect applied to the existing dredging and waste landfill is shown.

• Journal of the Korea Concrete Institute
• /
• v.23 no.6
• /
• pp.765-772
• /
• 2011

The present study summarizes a series of compressive tests on concrete cylinder in order to examine the stressstrain relationship of alkali-activated (AA) slag concrete. The compressive strength and unit weight of concrete tested ranged from 8.6 MPa to 42.2 MPa and from $2,186kg/m^3$ to $2,343kg/m^3$, respectively. A mathematical equation representing the complete stress-strain curve was developed based on test results recorded from 34 concrete specimens. The modulus of elasticity, strain at peak stress, slopes of ascending and descending branches of stress-strain curves were generalized as a function of compressive strength and unit weight of concrete. The mean and standard deviation of the coefficient of variance between measured and predicted curves were 6.9% and 2.6%, respectively. This indicates that the stress-strain relationship of AA slag concrete is represented properly with more accuracy in the proposed model than in some other available models for ordinary portland cement (OPC) concrete.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.2
• /
• pp.59-63
• /
• 1981

For the purpose of surveying accuracy of the position fix and local fluctuation of Omega signals in south coast of Korea, the author observe continuously the phase difference of the A-C pair and A-E pair form December 1, 1980, to February 28, 1981, at Cheju(33$^{\circ}$31'.0N, 126$^{\circ}$31.9E) and Busan(35$^{\circ}$7'.9 N, 129$^{\circ}$6'. 3 E). The analyzed results are as follows: 1. Omega signals at Cheju and Busan are positive correlation. Mean value of coefficients during all measured time is 0.70 with A-C pair and 0.75 with A-E pair. 2. Range of mean value of difference between the measured PPC at Cheju and Busan is 17.7~21.3 cels with A-C pair and -2.9~2.0 cels with A-E pair. 3. In case of using the differential Omega at Cheju and Busan, mean value of total errors of the position fix is 1.52 miles and its standard deviation is 0.21 miles.