• Journal of Environmental Impact Assessment
• /
• v.25 no.4
• /
• pp.248-260
• /
• 2016

This study was aimed to assess the effect of diverse pollutants control measures suggested in the Chuso basin and its upstream of So-oak stream watershed where are the most concerned areas on the control of algal bloom occurring in Daecheong Reservoir. The control measures were classified as watershed measures and in-reservoir measures, and their effects were simulated using a two-dimensional hydrodynamic and water quality model. The watershed measures were made up of 1) point sources control, non-point sources control, and their combinations. The in-reservoir measures were supposed to treat sediment at Chuso basin and to install a phosphorus elimination plant (PEP) at the end of So-oak stream. The results showed that the effect of each measure was influenced by the hydrological condition of the year. In wet year, as the contribution of non-point sources increased, the non-point source control measures (NPS1~NPS4) showed more effective compared to other measures, while, the PEP system to eliminate phosphorus from So-oak stream showed better performance in dry year. In particular, the scenario of NPS1, in which all livestock manures were collected and treated but only chemical fertilizers (NPS1) were used for agriculture fields, showed the best performance for the control of algal bloom in Chuso basin among the watershed measures.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.393-398
• /
• 2007

According to the Korean datum change to a world geodetic system, the EDM area should be readjusted to provide consistent product over the country. The data set for EDM area is extracted from the previous KTN1987 DB and checked for the moved markers in XY network adjustment which provides quality verification. Then, EDM data set for the seven areas are rebuilt for the adjustment. Since the data is still based on the old datum, the coordinates of the data are transformed by applying the coordinate transformation parameters. Here, the transformation parameters, which were determined for the conversion of 1:50,000 topographic maps by NGII, were used. For each EDM point, the geoidal height from EGM96 model is applied to obtain the ellipsoidal height based on the GRS80. The measured distance projected onto GRS80 is adjusted using BL network adjustment by fixing 2nd order or 3rd order GPS control points. The results from the readjustment show the minimum standard error of 1.37" and the maximum standard error of 2.13". Considering the measurement accuracy of EDM (1.6" corresponding to about 2cm) and GPS position for fixed points (2cm), this result is considered to be reasonable and it is good for the practical use.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.45-52
• /
• 1992

The Mathematical Model, which can describe the maneuvering motion of a ship in low speed, is highly required these days because it is directly related to the safety of ship in confused harbour. Kose has presented a new model for the low speed maneuvering motion, but the usefulness of it is not confirmed widely. Lets of difficulties are revealed in the case of low speed maneuver, The first is the fact that a ship moves the stirred water region for the longer time than in the case of high speed. So, the hydrodynamic forces, exerted on the hull need to be treated strictly, not by the ordinary differential equation with constant coefficients. Another difficulty is arised from the fact the lateral motion is relatively large comparing to the longitudinal motion in low speed. And, by the result the effect of cross-flow drag or vortex sheding effects are dominant. Besides, the captive model tests of low speed motion has lots of problems. For example, the hydrodynamic forces do not converge to a certain values for the long time. And the absolute values of measured forces are very small, so we must expend lots of efforts to raise up the S/N ratio of the experiments. In this paper, a new mathematical model for the maneuvering motion in low speed, is built up, and the usefulness is discussed, comparing with other models, for example, Kose's model or M.M.G. model or Cross-Flow model, The CMT data for a PCC model of 3.00 M length, released from the RR-742 of Japan, are used for the validation of each models.

• The Korean Journal of Nuclear Medicine
• /
• v.30 no.1
• /
• pp.19-34
• /
• 1996

[ $[^{123}I]{\beta}$ ]-CIT [$2{\beta}$-carbomethoxy-$3{\beta}$-(4-iodophenyl)tropane]는 도파민 운반체 (dopamine transporter)에 특이결합하며 $[^{123}I]{\beta}$-CIT의 도파민 운반체 결합정도는 파킨슨병에서 도파민 뉴우런의 변성정도를 반영하는 것으로 제안되어 왔다. 이 연구의 주요 목적은 파킨슨병 환자에서 $[^{123}I]{\beta}$-CIT SPECT를 이용하여 측정된 $[^{123}I]{\beta}$-CIT의 선조체 결합지표들이 질병의 임상적 진행정도를 반영하는지를 검토하고, 간편화된 조직방사능비가 $[^{123}I]{\beta}$-CIT의 결합정도를 나타내는 정량적 지표로 이용될 수 있는지를 검증하는 것이었다. 파킨슨병 환자 30명($59{\pm}9$세, 평균${\pm}$표준편차: Hoehn-Yahr stage 1-3)과 정상인 6명 ($58{\pm}5$세)을 대상으로 $[^{123}I]{\beta}$-CIT SPECT 영상을 얻었다. $[^{123}I]{\beta}$-CIT 선조체 결합의 정량적 지표로서 (선조체 방사능-소뇌방사능)/소뇌방사능 비(specific binding ratio, SBR)와 추적자역학모델을 이용하여 측정한 선조체 결합능(binding potential)($k_3/k_4$)을 구하였다. 파킨슨병 환자에서 $[^{123}I]{\beta}$-CIT의 선조체 결합역학은 정상인에 비하여 현저하게 느렸으며 그 결합지표들은 정상인에 비하여 뚜렷하게 낮았다. 한편, 편측파킨슨병 환자에서 $[^{123}I]{\beta}$-CIT 결합은 증상 반대쪽 선조체 뿐만 아니라 같은 쪽 선조체에서도 정상인에 비해 유의하게 감소되어 있었다. 파킨슨병 환자에서 $[^{123}I]{\beta}$-CIT 투여 후 24시간의 선조체 SBR 및 최대 SBR, 선조체 결합능은 모두, 유병기간, Hoehn-Yahr stage, UPDRS(Unified Parkinson's Disease Rating Scale) 총점, UPDRS 운동점수, UPDRS 일상활동점수와 유의한 상관관계를 나타내었다. 24시간 선조체 SBR과 최대 SBR은 선조체 결합능과 우수한 상관관계를 보였다. 이상의 결과로부터 $[^{123}I]{\beta}$-CIT의 선조체 결합은 파킨슨병의 진행정도를 나타내는 지표로 이용될 수 있다. 또 $[^{123}I]{\beta}$-CIT 투여 후 24시간 영상으로부터 얻은 간편화된 조직방사능 비는 $[^{123}I]{\beta}$-CIT의 결합정도를 정량적으로 반영한다. $[^{123}I]{\beta}$-CIT SPECT는 파킨슨병의 조기진단 및 진행 추적에 임상적으로 유용할 것으로 판단된다.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.3
• /
• pp.147-156
• /
• 2008

Purpose: All acts which are enforced from the radioactive iodine therapeutic team is a in its own way principle and provision. Therefore unification of all acts can not be appropriately. We will make the standard coherence. Materials & Methods: From 5 November, 2007 to 17 November 2007, we conducted a questionnaire survey of the nuclear medicine manager of 30 hospitals. The contents of a questionnaire is medical treatment section, patient management, prosecuting attorney section, waste management and safety supervision in about the patient and a questionnaire was drawn up in the method which selects an item. Results: 30 hospital agencies are operating purely for I-131 high dose ablation therapy. Diagnostic study and daily schedule had the difference of some. The most of education for the patients took charge of doctor and nurse. The satisfaction of education was evaluated as the high thing. The safety supervision of waste management accomplishment and Safety supervision the patient and the worker observed on the basis of atomic energy law. Conclusion: Specific standards with sufficient amount of information and practical contents should have been presented through the following data. However, it seems to be lacking in many aspects. Nevertheless, respondents rated 70.9%, which is relatively high, on the value of clinical utilization, and I am very thankful for the evaluation. For many years from now, it may seem necessary for a lot of research on the specific matters based on these data to be conducted.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.331-339
• /
• 2013

LiDAR has been one of the widely used and important technologies for 3D modeling of ground surface and objects because of its ability to provide dense and accurate range measurement. The objective of this research is to develop a method for automatic detection and modeling of railroad power lines using high density LiDAR data and RANSAC algorithms. For detecting railroad power lines, multi-echoes properties of laser data and shape knowledge of railroad power lines were employed. Cuboid analysis for detecting seed line segments, tracking lines, connecting and labeling are the main processes. For modeling railroad power lines, iterative RANSAC and least square adjustment were carried out to estimate the lines parameters. The validation of the result is very challenging due to the difficulties in determining the actual references on the ground surface. Standard deviations of 8cm and 5cm for x-y and z coordinates, respectively are satisfactory outcomes. In case of completeness, the result of visual inspection shows that all the lines are detected and modeled well as compare with the original point clouds. The overall processes are fully automated and the methods manage any state of railroad wires efficiently.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.6
• /
• pp.602-613
• /
• 2001

Recently, the computing has developing in distributed object computing environment for supporting a programming paradigm of distributed application requiring interoperability between heterogeneous clients and servers. It involves the complex networking and the object-oriented technologies for various multimedia application service. In this paper, we construct the real-time object group platform for solving the difficulties of managements of distributed objects and the real-time constraints by requiring for real-time service supporting of applications in distributed computing environment. The existing researches are being tried to only improving the performance of systems by using real-time CORBA itself, or modifying the part of CORBA compliance. Hence, we design a new model of real-time object group platform that can support the real-time requirement without modifying the ORB. The structure of our real-time object group analyzed and defined the requirement about object management and real-time application service sides. And the role of the components of real-time object group is divided into 2 classes for reducing the side effect of interoperability between management and service. Also, we considered how to transparently express the parameters of real-time properties for clients and developers of server's service objects. If the expression of real-time parameters is transparent, then the developer can easily extend the real-time parameters simply and flexibly. Therefore, in this paper we defined the role of components of platform and described functions of each component and designed and then implemented the real-time object group platform. Finally, we showed the execution procedures of implemented our platform for verifying the functionality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.743-751
• /
• 2016

It is critical to effectively change the measures of prevention from the breakdown maintenance proceeding an apartment housing maintenance task scope. It is necessary that systematization be performed for a series of tasks, such as facility inspection, diagnosis and replacement. In addition, it is preceded by establishing a standardization for maintenance work scope. Therefore, this study examined the problems related to public rental housing maintenance work scope to manage it more systematically. In addition, the study suggests a work process section for facility repairs, long term replacement and general maintenance using one on one interviews with experts to classify the occupants, management office and head office. This study's standard work system is expected to provide fairness and transparency in addition to improving the productivity in public rental housing maintenance via an efficiency promotion plan. In addition, it is used as the basic reference for developing a system of public rental housing maintenance costs and diagnosis actions. Finally, it is necessary to create improvements that provide a more objective work system standardization throughout the analysis of the productivity data according to the work flow and the review of the occupants, management office and head office in the future applications of the pilot site.

• Nuclear Engineering and Technology
• /
• v.27 no.5
• /
• pp.645-660
• /
• 1995

The loss of Residual Heat Removal System (RHRS) event during reduced inventory operation for the Korean Standard Nuclear Power Plants (KSNPPS) is simulated by RELAP5/MOD3 and RELAP5/MOD3.1 Tn cases are considered : Base case for an intact Reactor Coolant System (RCS) with no tent and a vent case for an open system. Comparative simulations of base case are peformed by RELAP5/MOD3 and RELAP5/MOD3. 1 computer codes. The results of too simulations are generally in good qualitative and quantitative agreement. However, since the results of RELAP5/MOD3 simulation reveals the deficiency of RELAP5/MOD3 wall heat model, the RELAP5/AOD3.1 computer code is used for the simulation of the vent case. The analysis result of base case show that two steam generators are insufficient to remove decay heat at one day after shutdown, where the RCS is closed. The RCS pressure increased continuously and reached the RCS temporary boundaries design pressure of 0.24 MPa around 4,000 seconds. In the vent case with a flow capacity equivalent to three times the capacity of Pressurizer Safety Valve (PSV), it is shown that the RCS Pressure does not reach 0.24 MPa and core uncovery does not occur until 10,000 seconds. The detailed discussions on the results of this study suggest the feasibility of RELAP5/AOD3.1 as an analysis tool for the simulation of the loss of RHRS event at reduced inventory operation. The results of this study also provide insight for the determination of proper vent capacity.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.257-265
• /
• 2016

The purpose of this study was to develop a strainer that could protect a flow system by blocking the introduction of foreign substances into the pipe of industrial or architectural facilities. Strainers are installed at the front tip of valves, machines, or pumps in the piping line of clean water, oil, or gas. There are Y-type, U-type, and T-type strainers. The study identified problems with the Y-type strainers, develop a "C-type strainer with its inlet and outlet on a straight line" as a more improved new model, and compared them in functions in a full-scale strainer test. The study conducted a full-scale strainer test according to four situations at the flow laboratory of Korea Research Institute of Standards and Science by using the old Y-type strainer and C-type strainer 50A. The test results show that the C-type strainer had a higher capacity coefficient(Kv) than the Y-type one, recording 74.9% when there was no screen, 54.5% when there were no foreign substances in the screen, 54.2% when there was a 15% accumulation of foreign substances, and 52.4% when there was a 30% accumulation of foreign substances. The investigator conducted a test only with the 50A type due to the limitations of life-size strainers, but the results demonstrate that the C-type strainer had better flow characteristics than the Y-type one.