• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.3
• /
• pp.107-122
• /
• 2006

The main objective of this study is to develop a web-based Geographic Information System (GIS) application, IGIS(Integrated Groundwater Information Service System), for efficient management of groundwater data. This integrated system includes various groundwater measurements, monitoring data, well data, hydrogeochemical data, hydrogeological maps and diversely analyzed results including time series analysis data for water levels and quality. It will be used efficiently for local government officers to manage groundwater within their districts and also for drillers and investigators to develop wells and assess groundwater conditions. This web-based GIS system was implemented firstly for Cheonan and Daegu city. As a result, the system makes the efficient management, distribution and utilization of groundwater data possible by web-based GIS technology.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.142-152
• /
• 2007

Geotechnical information database, foundation of underground geographic information system in 2nd NGIS plan, had been developing by Ministry of Construction and Transportation since 2000. This database contains not only soil condition, such as depth, type and color of layer, and ground water level, but also engineering properties used for foundation design and construction, for instance, standard penetration test, compression test. But, it is difficult to apply this database for analyzing and designing geotechnical works, because report document is only offered. In this paper, we have developed web-based geospatial information system for the effective uses. First, underground cross-section model is generated by location, layer, and engineering properties of geotechnical information database at the realtime process. Second, earth volume, bearing capacity, and settlement is calculated and potentials of soft ground, liquefaction are evaluated through pre-defined empirical formula. This process is operated by web-based client. We wish to strengthen the application capacity through this system in construction planning and design works.

• Journal of radiological science and technology
• /
• v.33 no.1
• /
• pp.45-50
• /
• 2010

In this study, we compared the clinical usefulness of SPAIR (Spectral Adiabatic Inversion Recovery) and STIR (Short TI Inversion Recovery) to evaluate the fat tissues precisely. The images of brain axial (n = 20), lumber spine sagittal (n = 20), hip joint coronal (n = 17) and knee joint (n = 25) were obtained by turbo spin echo T2 weighted method on 3T magnetic resonance image. The signal intensity (SI) values were measured using region of interest in fat, muscle tissue, and background noise. The inhomogeneity values were measured using the standard deviation (SD) value divided by the mean values. SD signifies the amount of error which is similar to the imaging heterogeneity. In brain axial images, the SPAIR showed more superior SI and inhomogeneity results than the STIR. In spine, hip and knee images, STIR showed more excellent SI results, but poor inhomogeneity than the SPAIR.

• Journal of KIISE:Software and Applications
• /
• v.30 no.12
• /
• pp.1247-1254
• /
• 2003

Currently. the north american symptomatic carotid endarterectomy trial, european carotid surgery trial, and common carotid method are used to measure the carotid stenosis for determining candidate for carotid endarterectomy using the projection angiography from different modalities such as digital subtraction angiography. rotational angiography, computed tomography angiography and magnetic resonance angiography. A new computerized carotid stenosis measuring system was developed using MR angiography axial image to overcome the drawbacks of conventional carotid stenosis measuring methods, to reduce the variability of inter-observer and intra-observer. The gray-level thresholding is one of the most popular and efficient method for image segmentation. We segmented the carotid artery and lumen from three-dimensional time-of-flight MRA axial image using gray-level thresholding technique. Using the measured intima-media thickness value of common carotid artery for each cases, we separated carotid artery wall from the segmented carotid artery region. After that, the regions of segmented carotid without artery wall were divided into region of blood flow and plaque. The calculation of carotid stenosis degree was performed as the following; carotid stenosis grading is(area measure of plaque/area measure of blood flow region and plaque) * 100%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.640-640
• /
• 2012

낙동강 홍수예경보 시스템은 낙동강 유역의 홍수피해 방지를 위해 1986년에 구축되어 낙동강홍수통제소에서 운영되어 온 이래로 여러 차례에 거친 시스템의 개선 및 보완을 통해 현재의 시스템을 갖추게 되었다. 그러나 4대강 사업을 통해 시행된 하도 준설 및 보 설치로 인한 하도 조건의 변경과 기존의 저류함수모형 및 수위-유량 관계식을 이용한 수위예측의 한계로 인해 낙동강 하도에 대한 수리해석모형 구축의 필요성이 대두되었다. 이에 따라 낙동강 홍수통제소에서는 기존의 저류함수모형을 이용한 강우-유출 해석모형과 낙동강 본류 및 주요 지류에 대한 수리해석 모형을 구축하여 연계하는 과업을 수행 중에 있다. 본 연구에서는 하천기본계획의 설계홍수량의 산정시 적용되는 HEC-HMS 모형을 통해 강우-유출해석모형을 구축하고, 낙동강 본류 및 8개 지류에 대해 FLDWAV 모형을 이용해 수리해석 모형을 구축하여 연계하였다. 수자원단위지도의 표준유역과 수위관측소 지점을 기반으로 하여 낙동강 유역을 287개의 소유역으로 분할하였고, 271개의 분할하도 및 10개의 다목적 댐 방류량을 반영하여 강우-유출 모형을 구축하였다. 수치지형도 및 토양도, 토지이용현황도를 통해 유역유출 및 하도유출에 대한 매개변수 산정하였고, 낙동강 본류 및 지류내의 주요 수위관측소를 유량의 검보정 지점으로 설정하였다. 수리학적 모형 구축을 위해 낙동강 본류의 383개의 단면 및 8개 지류의 497개 단면을 반영하였고, 그 이외의 6개 주요 지류는 측방유입으로 처리하였으며 낙동강 본류에 신설된 8개의 다기능보의 운영을 반영하였다. 각각 구축된 강우-유출 모형과 수리학적 모형은 모듈화하여 연계하였으며, 현재 낙동강홍수통제소에서 운영되고 있는 낙동, 왜관, 현풍, 진동, 삼랑진, 구포, 동촌수위관측소를 홍수예보지점으로 선정하여 모형의 검보정을 실시하였다. 구축된 모형은 낙동강홍수통제소의 홍수예보모형의 계산결과와 비교하여 적용성 및 효율성을 입증할 수 있을 것으로 판단되며, 낙동강에서의 실시간 홍수예 경보를 위한 홍수예보모형으로 활용될 수 있을 것으로 사료된다.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.2
• /
• pp.75-81
• /
• 2019

In this study 24 power transmission towers were selected by considering various variables such as power transmission capacity, height and structural type to evaluate their seismic performance using the standard design response spectrum recently announced by the government. In addition, the stresses and sectional forces generated by the current design wind loads and revised seismic ones were compared to review the effects on the design of power transmission towers when the government-required seismic standards were raised. The results of seismic performance evaluation for the target power transmission towers showed that they had seismic capacity of 0.31~0.91g, and that they met the level of the earthquake-resistant special grade, which is the 2,400-year earthquake return periods and secured seismic safety. Further, the sectional forces caused by earthquakes in the towers were 33~82.5% of the ones due to wind loads, and it was also confirmed that the design wind loads were more dominant than design earthquake ones under the elevated seismic standards.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2497-2504
• /
• 2013

This study aims to analyze the 'Standard Drawings for School Facilities' issued by Seoul Education Committee in 1975 because it is the early example for middle school architecture. The results of this study are summarized as follows 1) In general trend of single-corridor type block plan, there are also changes in floor plan like no-corridor type block plan, $9.9{\times}6.6m$ classroom unit for the better daylight condition, built-in storage for students. 2) As for elevation design, it is characterized as daylight-oriented, functional exterior for without making full use of design elements. 3) Standardized dimensions are used as a rule in the height of story, ceiling, window sill and etc. Transitional characteristics of the early RC school architecture are found in exposed ceiling, incomplete insulation structure and mixed use of wood framed floor of earlier type. 4) Contrast to main school building, gymnasium shows the intend to express the symbolism of school architecture with diverse elevation design elements and the plasticity of building mass. 5) Separated plan of toilet and night-duty building also show the transitional characteristics. As conclusion, though showing the stereotyped school architecture, on the other hand, 'Standard Drawings for School Facilities' (1975) makes it possible to see the way of coping with the demands for school architecture in that time and the transition of school architecture. This is the main value of it as the material for the studies related to the history of educational facilities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.554-561
• /
• 2016

In this study, loading tests and a strength evaluation of the bogie frame were conducted to verify the structural safety of the bogie system in an intermodal tram, which runs with cars on a road track. The loads were calculated taking into account the features of the road track with many sharp curves and steep gradients, which are different from the track of conventional railway. They were compared with the loads specified in the previous standard specifications. After the comparison, it was confirmed that the loads acting on the bogie system operating on a road track are slightly different from the specified loads. The specified vertical load of the standard specification for all kinds of trains is conservative, but the specified lateral and longitudinal loads are less than the calculated loads. The application of the actual loads was proven to be reasonable in the development of a new railway system. Based on the defined loads, the bogie frame was fabricated on which strain gauges were attached. It was set on the large loading frame so that the stresses could be measured when loads were applied by hydraulic actuators. After measuring the stresses, it was shown that they were below the allowable stress, which verified the structural safety of the bogie frame.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.3
• /
• pp.67-76
• /
• 2016

The railway bridge abutment subjected to the lateral earth pressure is a sensitive structure that is affected by backfill materials, installation methods, compaction, and drainage system and so on. The several design loads for the bridge abutment design consist of traffic loading on bridges and vertical & lateral force due to surcharge load at backfill. Especially, the lateral earth pressure of design load components is important and considered in the design of geotechnical engineering structure such as bridge abutment wall. The determination of cross section for abutment is finally determined with calculating external stability and member force of abutment wall structures. In this study, the abutment wall height is 12m and the optimal cross section of abutment wall has been determined that satisfies an external stability for abutment structure through friction angles of 35, 40, and 45 degrees of backfill materials. The external stability and member force of abutment wall with friction angle of backfill materials and were calculated and construction cost of each abutment wall structures was compared. It found that the construction cost was reduced from 2.2 to 8.4% with friction angle of backfill materials.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.54-63
• /
• 2018

In this study, the stability and economic feasibility of a MSE (Mechanically stability earth) wall with a pre-cast concrete pacing panel was investigated for a standard section of highway. Based on the design criteria, the MSE walls of the panel type were designed considering the load conditions of the highway, such as the dead load of the concrete pavement, traffic load, and impact load of the barrier. The length of the ribbed metal strip was arranged at 0.9H according to the height of the MSE walls. Because the length of the reinforcement was set to 0.9H according to the height of the MSE wall, the external stability governed by the shape of the reinforced soil was not affected by the height increase. The factor of safety (FOS) for the bearing capacity was decreased drastically due to the increase in self-weight according to the height of the MSE wall. As a result of examining the internal stability according to the cohesive gravity method, the FOS of pullout was increased and the FOS of fracture was decreased. As the height of the MSEW wall increases, the horizontal earth pressure acting as an active force and the vertical earth pressure acting as a resistance force are increased together, so that the FOS of the pullout is increased. Because the long-term allowable tensile force of the ribbed metal strip is constant, the FOS of the fracture is decreased by only an increase in the horizontal earth pressure according to the height. The panel type MSE wall was more economical than the block type at all heights. Compared to the concrete retaining wall, it has excellent economic efficiency at a height of 5.0 m or more.