• The Journal of the Acoustical Society of Korea
• /
• v.38 no.4
• /
• pp.387-395
• /
• 2019

TMA (Target Motion Analysis) in passive sonar is generally conducted with the bearing only or the bearing frequency. In order to conduct TMA fast and accurately, it is essential to estimate a initial target maneuver precisely. The accuracy of TMA can be improved by using SNR (Signal to Noise Ratio) information and acoustic propagation model additionally. This method assumes that the radiated noise level of the target is known, but the accuracy of TMA can be degraded due to a mismatch between the assumed radiated noise level and the actual radiated noise level. In this paper, TMA with the acoustic propagation model, bearing measurements, and SNR information is conducted in the ocean environment of South Korea (East Sea/ Yellow Sea/ South Sea). And the performance analysis of TMA for the mismatch in the radiated noise is presented.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.138-144
• /
• 2024

This paper presents a bistatic to monostatic conversion technique to analyze the bistatic target strength of submarines. The technique involves determining the transmission path length of acoustic waves, which are emitted from a source, scattered off an underwater target, and eventually received by a receiver. By generating a corresponding virtual scattering surface, this method effectively transforms the target strength analysis problem from bistatic to monostatic. The converted monostatic target strength problem can be assessed using a well-established monostatic numerical methods. The bistatic target strength analysis for Benchmark Target Strength Simulation (BeTTSi), a widely used target strength model were performed. The results were compared with those calculated by boundary element methods and Kirchhoff approximation, and confirmed the validity and the practical applicability of the proposed analysis technique for evaluating submarine target strength.

• Korean Journal of Remote Sensing
• /
• v.36 no.3
• /
• pp.441-448
• /
• 2020

GMTI (Ground Moving Target Indication) radar system can detect ground moving targets and can provide position and velocity information of each target. However, the azimuth position of target has some offset because of the hardware errors such as mechanical tolerances. In this case, an error occurs no matter how accurate the monopulse ratio is. In this paper, target position correction method in azimuth direction has been proposed. The received sum and difference signals of monopulse GMTI system are post-processed to correct the target azimuth angle error. This method is simple and adaptive for nonhomogeneous area because it can be implemented by using only software without any hardware modification or addition.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.7
• /
• pp.664-672
• /
• 2010

This paper provides the target observability analysis of time-to-go polynomial guidance law with bearing-only measurement. In this study, a direct approach is used to analyze the target observability. Since the observability condition of a constant-velocity target is given by the function of LOS angle only, the target observability characteristic is determined by substituting the closed form solution of LOS angle to the observability condition directly. The analysis results show that the target observability is depended on the choice of guidance gain, initial intercept condition and guidance command shape. After that this mathematical analysis result is evaluated and demonstrated by number of simulation.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.7
• /
• pp.7-14
• /
• 2000

In this paper, we propose a near-field target localization algorithm using a bottom-mounted linear sensor amy in a multipath environment. In a multipath environment, the conic angles of a target signals through each path are different, and the position of the target can be estimated using these conic angles and the time difference of these signals. We derive equations on the relation of time-difference of signals and conic angles estimates under the far-field assumption, and estimate the position of target by simultaneously solving these equations. For a certain geometry of a target and the sensor array, there exist cases when the conic angles are very close. In such a case, we estimate the position of the target using an additional 1-D search.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.1
• /
• pp.79-88
• /
• 2001

The target such as aircraft operates flares to protect itself from the missile. In general, Infra-red(IR) flares that are hot bodies radiating energy considerably greater than it does, so cause the missile to guide the flare instead of the target. For a precise target tracking in spite of a presence of flares, therefore, the seeker should discriminate the target signal from various clutters including the flare and the background. In this paper, we simulated 2-color rosette scan seeker using IR and UV(UltraViolet) bands. In each wave band, we analyzed the radiant distributions of the target, the flare, and background. These results showed that a simultaneous process in two bands can detect precisely the target.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.151-154
• /
• 2013

We typically have a variety of equipment that can detect and track targets, and detect and track target quickly and accurately through the exchange of the information between each piece of equipment. These equipments have similar detection area(FOV), but some are different due to the limits of the resolution of the equipments. In this paper, we studied the method of reducing time to search and detect target, and also did the method of tracking automatically it.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4A
• /
• pp.316-323
• /
• 2002

In this paper, we propose a counter-countermeasure (CCM) in a crossed array tracker for efficient target tracking under countermeasures (CM) operated by a target. The proposed CCM adepts two detection bands and uses the signal distribution characteristics to discriminate between the target and the CMs. To avoid wrong detection of a target position due to missing signal pulses, it predicts current target position based on previous target position. To evaluate the performance of the proposed CCM in a crossed array tracker, we perform numerical simulations for target signal extraction and target tracking under various conditions. The simulation results show that the proposed CCM removes the CM effect well and tracks the target efficiently.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1593-1600
• /
• 1999

This paper describes the acquisition modeling of an airborne target for target tracking simulation of infrared homing missiles. The modeling, of which key technologies are the sub-modeling for target infrared signature, atmospheric transmission, and receiver characteristics, shows the acquisition process of an airborne target under various tracking conditions determined by line-of-sight, distance, and atmospheric conditions. We confirm the validity of the modeling by applying it to simulations concerned with target tracking. The modeling gives a guideline to determine an optimum detector and a defection band for effective discrimination of the target among false targets.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.3023-3029
• /
• 2013

This is an example we generally have a variety of equipment that can detect and track the targets and track them quickly and accurately through the information exchange among each piece of equipment. These equipment have similar detection areas (FOV), but some are different due to the limit of the resolution of the equipment. In this paper, we studied the method of reducing detection time and tracking the targets automatically.