• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.3
• /
• pp.101-107
• /
• 1982

The progressive sampling method adapts well to the local variabilities of the input terrains, and is therefore one of the most efficient sampling methods in DTM. The efficiency of progressive sampling can be enhanced by increasing the comprehensiveness of grid densification criteria, with superfluous points reduced and/or suppressed. In this investigation, four different criteria were applied to the numerical test, and the suppression criterion was found the most significant among them.

• Journal of the Korean Geographical Society
• /
• v.34 no.3
• /
• pp.319-336
• /
• 1999

본 연구는 우리나라의 수치지형도에서 수치고도모형(DEM)을 개발하고자 할 때 고려해야 할 요인들을 분석하였다. 특히 DEM의 정확도에 결정적으로 영향을 미치는 내삽법의 과정을 지형적 유형(평지.계곡.산지)과 공간적 표본추출법(체계적추출법.군집형무작위추출법.복합점진적표본추출법)에 따라 구분하여 살펴 보았다. RMSE의 측정을 통해 크리깅 내삽법이 지형의 기복에 산관없이 정확도를 유지함녀서 DEM을 생성할 수 있는 방법으로 평가되었다. 그리고 표본추출법에 따라 공간적 표본 밀도를 달리한 낮은 표본을 대상으로 한 경우에 비해 낮게 나타났다. 또한 본 연구에서 제안한 복합 점진적 표본추출법을 적용한 DEM의 정확도는 다른 표본추출법을 적용한 경우보다 그 정확도가 향상됨을 확인하였고, 반면에 계산상의 효율성이 다른 방법에 비해 떨어지는 단점을 보였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.2
• /
• pp.124-136
• /
• 2006

The change pattern of the sediment grain size distribution information (median grain size(D50)) due to some gridding method and sampling density is analyzed with reference to the grid information estimated by the 90 sediment samples which was collected in the coastal water off the Baengnyeongdo Island, in June 2004. The standard deviation of absolute deviation (AD) estimated the selected gridding method shows 8.0 ${\mu}m$ at June, 2004 and 10 ${\mu}m$ November, 2004. The estimated statistical information of absolute deviation in comparison with the grid information of reference and changed sampling density shows that the AD mean error trends increase as the number of samples decrease. The AD mean error is below 10% in the case of the information estimation using 50-sample with reference to the 90-sample information. In this case, the sampling density is suggested as about 9 sediment samples per $km^2$, at coastal zone in Yoggipo port in the condition of the study area is 5.9 $km^2$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.2
• /
• pp.67-73
• /
• 1985

In Digital Terrain Model(DTM), more accurate data acquisition method is of importance. This paper has the purpose of accuracy analysis of progressive sampling method, one of data acquisition method. Especially, The following in accuracy analysis are compared and analyzed. -Comparison and analysis for position error between the digital contour lines using digital terrain model and the conventional contour lines using A-10 Plotter. -Analysis for height error of interpolation points according to application of progressive sampling method. For above numerical tests, Computer Program related to auto-carto of contour lines was made up. As a result of tests, threshold and sampling criterion have close of mutual relation to accuracy. Particularly, it was found that auto-carto of contour lines-threshold of 1.0 m and standard criterion-almost concurred in conventional contour lines.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.6 no.1
• /
• pp.25-34
• /
• 1988

Digital Terrain Model is composed of two basic elements, namely, sampling and interpolation. They represent the procurement of data and the geometric reconstruction of terrain relief respectively. For evaluation DTM data, following two paremeters appear to be the most important factor, that is, the accuracy and efficiency and, in particular, the break point information significantly affect to the accuracy of DTM data. The main objective of this study is to improve the accuracy and efficiency of DTM by applying Progressive Sampling with distinct morphologic information. In this study, the total of 240 individual numerical tests has been implemented and the appropriate computer program is also developed for the test. The result of investigation shows that the Progressive Sampling with break point information improves the accuracy of DTM by 30 percent approximately.

• Asian Journal of Turfgrass Science
• /
• v.16 no.2
• /
• pp.97-106
• /
• 2002

The oriental beetle, Exomala orientalis, Is the most important insect pest of turfgrass in Korean golf courses. The study was carried out to get practical information on the sampling of E. orientalis in golf courses. Real numbers of E. orientalis larvae were compared with and observed numbers depending on sampling size (5$\times$5 cm, l0$\times$10 cm, 20$\times$20 cm, 30$\times$30 cm, and 40$\times$40 cm) and times (3 to 15 replicates) in Dongrae Benest Golf Club. Over 95% accuracy was obtained between real data and estimated data at the density of over 303 larvae/m$^2$ when the 20$\times$20 cm was sampled with 4 replications. Larval density of E. orientalis was different depending on year and course sites (tee, fairway, rough, green).

• Korean journal of applied entomology
• /
• v.42 no.1
• /
• pp.29-34
• /
• 2003

Dispersion pattern for adult citrus red mite (CRM), Panonychus citri (McGregor) using by Taylor's power law (TPL) and Iwao's patchiness regression (IPR) was determined to develop a monitoring method on citrus orchards, on Jeju, in Autumn season, during 2001 and 2002.CRM population was sampled by collecting leaves and fruits. The relationships of CRM adults between leaf and fruit were analyzed by different season. The regression equation for CRM adults between leaf (X) and fruit (Y) was ln(Y+1) : 1.029 ln(X+1) ( $r^2$ : 0.80). The density of CRM was higher on fruit than on leaf according to fruit maturing level. TPL provided better description of mean-variance relation-ship for the dispersion indices compared to IPR. Slopes and intercepts of TPL from leaf and fruit samples did not differ between sample units and surveyed years. Fixed-precision levels (D) of a sequential sampling plan were developed using Taylor's power law parameters generated from adults of CRM in leaf sample. Sequential sampling plans for adults of CRM were developed for decision making CRM population level based on the different action threshold levels (2.0,2.5 and 3.0 mites per leaf) with 0.25 precision. The maximum number of trees and required number of trees sampled on fixed sample size plan on 2.0,2.5 and 3.0 thresholds with 0.25 precision level were 19, 16 and 15 and their critical values T$_{critical}$ at were 554,609 and 659, respectively. were 554,609 and 659, respectively.

• Korean journal of applied entomology
• /
• v.48 no.1
• /
• pp.45-51
• /
• 2009

This paper presents sequential sampling plans for evaluating the pest density based on complete counts from probe in a rice storage warehouse. Both maize weevil and Indian meal moth population showed negative binomial dispersion patterns in brown rice storage. For cost-effective monitoring and action decision making system, sequential sampling plans by using the sequential probability ratio test (SPRT) were developed for the maize weevil and Indian meal moth in warehouses with 0.8 M/T storage bags. The action threshold for the two insect pests was estimated to 5 insects per kg, which was projected by a matrix model. The results show that, using SPRT methods, managers can make decisions using only 20 probe with a minimum risk of incorrect assessment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.1
• /
• pp.93-104
• /
• 1982

DTM data evaluation regards accuracy and efficiency as its most important parameters, and these two elements are sensitively influenced by the sampling technique employed and its procedure. This study attempts to improve sampling techniques and evaluate the accuracy of DTM based on earth volume calculation, using aerial photography and field survey information as basic DTM data, and a regular grid and progressive sampling method for sampling process. Especially, the progressive sampling has employed different combinations of threshold and sampling criteria, that is, parameters influential on efficiency and accuracy, for the purpose of numerical tests intended to permit comparative analysis. The tests have resulted in the findings that in progressive sampling its grid density fits in well with given terrain characteristics in proportion to their variability. and that threshold and accuracy contain close mutual relations in which an increased threshold bringing more efficency but less accuracy. It follows, therefore. that a threshold, when appropriately determined, can be of very efficient use for considerably broad applications, and particularly, will play a significant role in its application to such general civil engineering as earth volume calculation.

• Korean journal of applied entomology
• /
• v.20 no.4 s.49
• /
• pp.217-222
• /
• 1981

As a primary study on the economic injury level of A. tokionis larval populations in tobacco fields, we carried out some experiments for the evaluation of sampling efficiency of 3 sampling methods (pit-fall traps of apple pomace and rice bran, and clover patches) for the larval population and the regressions between loss and infested larval density The $10\times10cm$ clover patch showed a better sampling efficiency $11.8\;to\;18.0\%$ than the others. The sampling efficiency of clover patch becomes higher when the plots did not have any green plants. The linear regression equation (Y=4.2+1.383x) between loss (Y:kg/10a) and infested larval density (X: no. of larvae/plot) which was obtained by substitution of damage ratio and corrected damage ratio fitted the observed data better than the one (Y=2.68X) obtained without substitioning.