• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.19-33
• /
• 2001

In the developed countries, traffic noise is one of most serious problems faced by people's lives. So the importance of the traffic noise is quite well recognized by the infrastructure planners as well as the people. The traffic noise is valued in monetary terms in some countries and it is reflected in estimating the net present value or benefit/cost ratio. On the contrary, the effects of traffic noise are not reflected in the assessment of infrastructure in most cases in Korea. However, as the income level has been increasing, more people have been becoming to put more importance on their living conditions. The purpose of this paper is to estimate the value of traffic noise in the Seoul metropolitan area. The housing price were surveyed to use the quasi-hedonic price technique. By this way, two housing prices at the same floor level in different 128 complexes in the Seoul metropolitan area were surveyed. the actual traffic noise level was also measured. The differences of housing prices and noise levels were analyzed using the various types of regression models. The value is quite different by size of house. The value of large house is higher than that of small house. Since the income level of people in large house is higher than that in small house. it might be said that value of traffic noise for high income people is higher than that for low income people. Moreover, the increase of 1dB(A) noise affects the house price by about 0.3% in Seoul metropolitan area.

• Environmental and Resource Economics Review
• /
• v.17 no.4
• /
• pp.845-873
• /
• 2008

This study estimates the VSL(value of a statistical life) as well as the WTP(willingness to pay) for mortality risk reduction using sample selection model with data on liver cancer examination which is associated with little possibility of multi-purpose(i.e. joint production) in averting behavior. The marginal benefits of mortality risk reduction are estimated by applying for household production function model with medical expense and the time required for medical examination of liver cancer. Individuals are more likely to take liver cancer test if they are male, older, higher educated, those with spouse, smoker, more income of household, and more anxious about their health. The costs of liver cancer examination are statistically significantly affected with expected signs by size of mortality risk reduction, sex, period of eduction, those with spouse, and household income. The marginal effect of mortality risk reduction owing to taking liver cancer examination is estimated at 321,097 won. The costs of liver cancer examination are increased by 905 won with more one year of education period and by 1,743 won with more one million won in household income. On liver cancer examination, male spends more 12,310 won than female and those with spouse pay more 7,969 won than those without spouse. Therefore the VSL from mortality risk reduction due to liver cancer examination is 321.10 million won at mean size of mortality risk reduction and mean cost of liver cancer examination. The results of sensitivity tests on costs and effects of liver cancer test shows that the VSLs are estimated in a range from 160.55 million won to 642.19 million won.

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.412-421
• /
• 2018

The objective of this study was to analyze the effects of forest management activities on canopy fuel characteristics for Pinus densiflora stands in South Korea. We used 1,085 managed stands data and 349 unmanaged stands data of the National Forest Inventory for this study, and it was estimated by using the Weibull function for the growth of stand and canopy fuel characteristics. Comparing the canopy fuel characteristics for the managed stands and unmanaged stands shows that the average canopy fuel load is about 14% higher than that of managed stands, and the canopy bulk density is also approximately 16% higher. The results of comparing growth projections for 40 years, 50 years and 60 years with the Weibull function are as follows: Over time, managed stands was predicted the maximum number of medium and large class diameter, while unmanaged stands was predicted maximum number of small and medium class diameter. From a fire fuel perspective, unmanaged stands are predicted to be of the type small class diameter and high density, which is a good condition for crown fire. In addition, Canopy fuel load, Canopy bulk density is relatively higher than managed stands, indicating that the possibility of high crown fire hazard.

• Management & Information Systems Review
• /
• v.37 no.1
• /
• pp.139-154
• /
• 2018

R programming is free and open source system associated with a rich and ever-growing set of libraries of functions developed and submitted by independent end-users. It is recognized as a popular tool for handling big data sets and analyzing them. Reflecting these characteristics, R has been gaining popularity from data analysts. However, the antecedents of R technology acceptance has not been studied yet. In this study we identify and investigates cognitive factors contributing to build user acceptance toward R in education environment. We extend the existing technology acceptance model by incorporating social norms and software capability. It was found that the factors of subjective norm, perceived usefulness, ease of use affect positively on the intention of acceptance R programming. In addition, perceived usefulness is related to subjective norms, perceived ease of use, and software capability. The main difference of this research from the previous ones is that the target system is not a stand-alone. In addition, the system is not static in the sense that the system is not a final version. Instead, R system is evolving and open source system. We applied the Technology Acceptance Model (TAM) to the target system which is a platform where diverse applications such as statistical, big data analyses, and visual rendering can be performed. The model presented in this work can be useful for both colleges that plan to invest in new statistical software and for companies that need to pursue future installations of new technologies. In addition, we identified a modified version of the TAM model which is extended by the constructs such as subjective norm and software capability to the original TAM model. However one of the weak aspects that might inhibit the reliability and validity of the model is that small number of sample size.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.4 s.26
• /
• pp.80-90
• /
• 2005

Activity durations retain probabilistic and stochastic natures due to diverse factors causing the delay or acceleration of activity completion. These natures make the final project duration to be a random variable. These factors are the major source of financial risk. Extending the Stochastic Project Scheduling Simulation system (SPSS) developed in previous research; this research presents a method to estimate how the final project duration behaves when activity durations change randomly. The final project cost is estimated by considering the fluctuation of indirect cost, which occurs due to the delay or acceleration of activity completion, along with direct cost assigned to an activity. The final project cost is estimated by considering how indirect cost behaves when activity duration change. The method quantifies the amount of contingency to cover the expected delay of project delivery. It is based on the quantitative analysis to obtain the descriptive statistics from the simulation outputs (final project durations). Existing deterministic scheduling method apply an arbitrary figures to the amount of delay contingency with uncertainty. However, the stochastic method developed in this research allows computing the amount of delay contingency with certainty and certain degree of confidence. An example project is used to illustrate the quantitative analysis method using simulation. When the statistical location and shape of probability distribution functions defining activity durations change, how the final project duration and cost behave are ascertained using automated sensitivity analysis method

• Journal of Service Research and Studies
• /
• v.6 no.3
• /
• pp.41-54
• /
• 2016

We examine the information transmission between the business survey index(BSI) based on the returns data offered by Federation of Korean Industries and KOSPI Index based on the returns data offered by Korea Bank. The data includes monthly return data from January 1998 to September 2015. The results of the analysis are as follows. Firstly, results of Granger Causality test suggests the existence of mutual causality KOSPI Index precede and have explanatory power BSI. Secondly, the results of impulse response function suggest that BSI Index show immediate response to KOSPI Index and are influenced by till time 4 From time 2 the impact gradually disappears. Also KOSPI Index show immediate response to BSI and are influenced by till time 4 From time 2 the impact gradually disappears. Lastly, the variance decomposition analysis showed a high influence of the KOSPI Index on the BSI and significant influence of the BSI on the KOSPI Index. This implies that returns on the KOSPI Index have a significant influence over returns on the BSI. The study is a further extension of existing studies on information transmission mechanism between the BSI and KOSPI. Finally, our results can be used as a guide by the Korea Bank and Republic of Korea and as well as Federation of Korean Industries.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.329-335
• /
• 2010

Digital imaging detectors can use a variety of detection materials to convert X-ray radiation either to light or directly to electron charge. Many detectors such as amorphous silicon flat panels, CCDs, and CMOS photodiode arrays incorporate a scintillator screen to convert x-ray to light. The digital radiography systems based on semiconductor detectors, commonly referred to as flat panel detectors, are gaining popularity in the clinical & hospital. The X-ray detectors are described between a-Silicon based indirect type and a-Selenium based direct type. The DRS of detectors is used to convert the x-ray to electron hole pairs. Image processing is described by specific image features: Latitude compression, Contrast enhancement, Edge enhancement, Look up table, Noise suppression. The image features are tuned independently. The final enhancement result is a combination of all image features. The parameters are altered by using specific image features in the different several hospitals. The image in a radiological report consists of two image evaluation processes: Clinical image parameters and MTF is a descriptor of the spatial resolution of a digital imaging system. We used the edge test phantom and exposure procedure described in the IEC 61267 to obtain an edge spread function from which the MTF is calculated. We can compare image in the processing parameters to change between original and processed image data. The angle of the edge with respect to the axes of detector was varied in order to determine the MTF as a function of direction. Each MTF is integrated within the spatial resolution interval of 1.35-11.70 cycles/mm at the 50% MTF point. Each image enhancement parameters consists of edge, frequency, contrast, LUT, noise, sensitometry curve, threshold level, windows. The digital device is also shown to have good uniformity of MTF and image parameters across its modality. The measurements reported here represent a comprehensive evaluation of digital radiography system designed for use in the DRS. The results indicate that the parameter enables very good image quality in the digital radiography. Of course, the quality of image from a parameter is determined by other digital devices in addition to the proper clinical image.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.5
• /
• pp.315-326
• /
• 1991

This study was tried for a mathematical approaches related to daily fluctuations in the stomach fullness of Agrammus agrammus. The specimen was collected by angling and gill net from September 1984 to August 1985 off Shinsudo, Samchonpo. Fullness of the stomachs was increased in the early morning and the late afternoon, decreased in the late morning, at noon, and during the night. That is, feeding activity of the fish was more intense at sunrise and sunset. Daily feeding activity of the fish in a day was divided into the time period of gastric evacuation and both feeding and gastric evacuation. Stomach fullness with the lapse of time in the time period of gastric evacuation was geometrically decreased. Stomach fullness in the time period of both feeding and gastric evacuation was affected by gastric evacuation rates, feeding rates, and maximum fullness of the stomach. These parameters were able to estimate from the method estimating the regression coefficient in the relationship between the time(t) and the stomach fullness$(F_t)$, or between stomach fullness at the time t and $t+\Deltat$. The rates of feeding and gastric evacuation were the highest in spring and the lowest in winter. The relationships between time(t) and stomach fullness$(F_t)$ in the time period of gastric evacuation and both feeding and gastric evacuation induced from hypotheses were respectively as follows. $$F_t=F_{to}e^{-r(t-to)}$$, $$F_t=F\infty-(F\infty-F_{to})e^{-(p+r)(t-{to})}$$

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.2
• /
• pp.109-120
• /
• 2017

A discounted cost model for preventive maintenance of armor units of rubble-mound breakwaters is mathematically derived by combining the deterioration model based on a discrete-time stochastic process of shock occurrence with the cost model of renewal process together. The discounted cost model of condition-based maintenance proposed in this paper can take into account the nonlinearity of cumulative damage process as well as the discounting effect of cost. By comparing the present results with the previous other results, the verification is carried out satisfactorily. In addition, it is known from the sensitivity analysis on variables related to the model that the more often preventive maintenance should be implemented, the more crucial the level of importance of system is. However, the tendency is shown in reverse as the interest rate is increased. Meanwhile, the present model has been applied to the armor units of rubble-mound breakwaters. The parameters of damage intensity function have been estimated through the time-dependent prediction of the expected cumulative damage level obtained from the sample path method. In particular, it is confirmed that the shock occurrences can be considered to be a discrete-time stochastic process by investigating the effects of uncertainty of the shock occurrences on the expected cumulative damage level with homogeneous Poisson process and doubly stochastic Poisson process that are the continuous-time stochastic processes. It can be also seen that the stochastic process of cumulative damage would depend directly on the design conditions, thus the preventive maintenance would be varied due to those. Finally, the optimal periods and scale for the preventive maintenance of armor units of rubble-mound breakwaters can be quantitatively determined with the failure limits, the levels of importance of structure, and the interest rates.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.16 no.3
• /
• pp.147-154
• /
• 2011

Decision making in Environmental Impact Assessment (EIA) and Consultation on the Coastal Area Utilization (CCAU) is footing on the survey reports, thus requires concrete and accurate information on the natural habitats. In spite of the importance of reporting the ecological quality and status of habitats, the accumulated knowledge and recent techniques in ecology such as the use of investigated cases and indicators/indices have not been utilized in evaluation processes. Even the EIA report does not contain sufficient information required in a decision making process for conservation and development. In addition, for CCAU, sampling efforts were so limited that only two or a few stations were set in most study cases. This hampers transferring key ecological information to both specialist review and decision making processes. Hence, setting the effective number of sampling stations can be said as a prior step for better assessment. We introduced a few statistical techniques to determine the number of sampling stations in macrobenthos surveys. However, the application of the techniques requires a preliminary study that cannot be performed under the current assessment frame. An analysis of the spatial configuration of sampling stations from 19 previous studies was carried out as an alternative approach, based on the assumption that those configurations reported in scientific journal contribute to successful understanding of the ecological phenomena. The distance between stations and number of sampling stations in a $4{\times}4$ km unit area were calculated, and the medians of each parameter were 2.3 km, and 3, respectively. For each study, approximated survey area (ASA, $km^2$) was obtained by using the number of sampling stations in a unit area (NSSU) and total number of sampling stations (TNSS). To predict either appropriate ASA or NSSU/TNSS, we found and suggested statistically significant functional relationship among ASA, survey purpose and NSSU. This empirical approach will contribute to increasing sampling effort in a field survey and communicating with reasonable data and information in EIA and CCAU.