• Biomedical Science Letters
• /
• v.4 no.1
• /
• pp.65-72
• /
• 1998

Recently there have been frequent reports on human infection caused by the Diphyllobothridae in Korea. The adequate opportunities for Koreans to eat raw fish, the primary infection medium of cestodes and the human infection through drinking water by cyclops, the first intermediate host are believed to be main reasons for the infection. The first task of this study was to classify and diagnose the species by differentiating morphological characteristic between scolex and proglottids of cestodes. However, the initially available diagnosis was done with the patient's symptoms and the eggs obtained from his stool. It is important to differentiate the species by the eggs of Diphyllobothrium latum especially in that it can help get advance information for a more reliable analysis in the near future. The morphological and diagnostic results from proglottids and eggs of Diphyllobothrium latum, Diphyllobothrium latum parvum and Spirometra erinacei are as follows； In each kind of cestodes from the patient's stool, the shape and size of 50 eggs were measured. Eggs of Diphyllobothrium latum had an operculum and were ovoidal or ellipsoid to elliptical in shape. Eggs of Diphyllobothrium latum parvum were more ovoidal in shape and smaller in size than Diphyllobothrium latum. And eggs of Spirometra erinacei were asymmetrical in width and long and slender in shape. The average lengths and widths of Diphyllobothrium latum, Diphyllobothrium latum parvum and Spirometra erinacei were 61.4$\times$41.7 $\mu\textrm{m}$, 55.9$\times$41.4 $\mu\textrm{m}$ and 66.7$\times$36.4 $\mu\textrm{m}$, respectively. After the segments of each cestode were fixed, embedding and hematoxylin-eosin dyeing on a microtome-made specimen were done. The micrographs of the semicon's aceto-carmine dyed specimen showed that Diphyllobothrium latum and Diphyllobothrium latum parvum had a centrally-located genital gland and an opened uterine pore. The yolks were observed on both sides of proglottids and had a typical rosette pattern. Yet, Diphyllobothrium latum parvum was shown smaller than Diphyllobothrium latum in the micrograph. Proglottids of Spirometra erinacei displayed that the uterus was rolled spirally more than five to seven times, and connected successively to the seminal vesicle in the cirrus sac. Shown above, this study was performed to measure the size of eggs and analyze the morphological characteristics of proglottids and provided the measurements of three types of cestodes obtained by a light microscope.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.2
• /
• pp.123-127
• /
• 1987

The Pungent principles and Essential oil compositions of Zanthoxylum piperitum $D_E$ $C_{ANDOLIE}$(peel, barb) were analysed by HPLC and GC, respectively. Total Pungent principle contents of peels were about as 12 times as those of barks. The Sanshool I, Sanshool IV, Sanshool III and Sanshoo V were the major Pungent principles in the peels and barks. Besides, several Unknown Pungent principles were discovered in the peels and barks, too. Total Essential oil contents of peels were higher than those of barks at the ratio of 1.8 % to 0.5%. The Cineol+Limonene(37.7%) were the main Essential oil compositions in the peels, while ${\alpha}-Terpineol(16.5%)$ and Pinene(15.5%) were the major portion in the barks. The Essential oil of peels and barks were composed Pinen, Myrcene, Cineol+Limonene, Linalool, Isopulegol, Terpinen-4-ol, ${\alpha}-Terpineol$ and Piperitone. Besides, seven Unknown compositions were discovered, too.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.403-414
• /
• 1995

The purpose of this study was to investigate the histologic changes in mandibular periodontium during overbite closure for openbite treatment by continuous arch wires and anterior vertical elastics. Two female monkey(Macaca nemestrina) with permanent dentition were used. Posterior bite block was fixed to each of their maxillae, which made the animal temporary anterior openbite as well as stabilized the whole maxillary anchorage. In each mandible, all the teeth except the second molars which had been extracted, were prepared for cast crowns. 018 inch Standard brackets were welded on these crowns. After cementation, two types of the $016{\times}022$ inch continuous arch wires, the plain ideal arch to the control animal and the MEAW(multiloop edgewise archwire) to the other experimental one were inserted. Then anterior vertical elastics were applied for two weeks. The overbite depth changes in the monkeys and histologic examinations of the mandibular periodontiums suggested the following conclusions. 1. During two weeks of the experimental period, the overbite increased + 0.3 mm in the control and + 1.3 mm in the experimental one. 2. In both the control and the experimental animal, histologic examinations showed that incisors, canines and first premolars were subject to extrusive force and the rest of posteriors were subject to intrusive one. 3. In periodontiums of the extruded incisors of the experimental one, reorientation of the periodontal fiber structures reflected the direction of force and the alveolar bone surfaces including apical and crestal areas which had been subject to tension, were the front of new bone formation. 4. In periodontiums of the extruded incisors of the experimental one, neither excessive hyalinization nor gross root resorption was observed. 5. Alveolar bone remodeling of anteriors and posteriors was more remarkable in the experimental one than the control.

• Korean Journal of Environment and Ecology
• /
• v.29 no.6
• /
• pp.895-906
• /
• 2015

This study was carried out to the structure of plant community from Sinseongam to Jungdaesa in Odaesan National Park, furthermore, it seeks to curate the basic data for planning of the Abies holophylla's forest management in Odaesan National Park. In order to identify the current ecological environment, this study explored the actual vegetation as primary research and set to twenty plots(i.e. $400m^2$) for analysing detailed structure of plant communities. The research methodology was qualitative analysis, therefore it used TWINSPAN and DCA analysis tools. Especially, TWINSPAN performed well in several comparisons of classification techniques, DCA is one of the ordination technique showed that the plant communities. The plant community was analysed classification and ordination by TWINSPAN and DCA, moreover it was analysed the structure of plant community such as importance percentage of woody species, DBH class distribution, the index of diversity and rate of sample tree growth. The main vegetation was A. holophylla-Quercus mongolica forest and Deciduous broad-leaved forest in the communities where located in low altitude and valley, whereas main vegetation where located in high altitude and slope was Q. mongolica forest. The research site's plant communities were classified four groups. In all of communities, A. holophylla was dominant species in main canopy layer, furthermore, the three communities (community I, II, III) are growing up next generation of A. holophylla excluding community IV. The communities (community I, II, III) can be sustained current status which dominates the A. holophylla communities, simultaneously, there might be expanded the Deciduous broad-leaved communities by Carpinus cordata, Betula schmidtii and so on. While, it showed that the community IV tended to be weaken the forces of A. holophylla, therefore the community IV can be transferred to C. cordata-Deciduous broad-leaved communities in the future. The age of sample trees was 79~128(i.e. A. holophylla), 75~87(i.e. Pinus koraiensis) and 190 years(i.e. Ulmus davidiana var. japonica). The index of Shannon's Species diversity (H') were ranged from 0.3889 to 1.3332 in the communities.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1996.05a
• /
• pp.1-3
• /
• 1996

시뮬레이션 기법을 이용한 시스템의 분석에 있어서 실험의 자동화는 현재 많은 연구와 개발이 진행 중인 분야이다. 컴퓨터와 정보통신 시스템에 대한 시뮬레이션의 예를 들어 보면, 수많은 모델을 대한 시뮬레이션을 수행할 경우 자동화된 실험의 제어가 요구되고 있다. 시뮬레이션 수행회수, 수행길이, 데이터 수집방법 등과 관련하여 시뮬레이션 실험방법이 자동화가 되지 않으면, 시뮬레이션 실험에 필요한 시간과 인적 자원이 상당히 커지게 되며 출력데이터에 대한 분석에 있어서도 어려움이 따르게 된다. 시뮬레이션 실험방법을 자동화하면서 효율적인 시뮬레이션 출력분석을 위해서는 시뮬레이션을 수행하는 경우에 항상 발생하는 초기편의 (initial bias)를 제거하는 문제가 선결되어야 한다. 시뮬레이션 출력분석에 사용되는 데이터들이 초기편의를 반영하지 않는 안정상태에서 수집된 것이어야만 실제 시스템에 대한 올바른 해석이 가능하다. 실제로 시뮬레이션 출력분석과 관련하여 가장 중요하면서도 어려운 문제는 시뮬레이션의 출력데이터가 이루는 추계적 과정 (stochastic process)의 안정상태 평균과 이 평균에 대한 신뢰구간(confidence interval: c. i.)을 구하는 것이다. 한 신뢰구간에 포함되어 있는 정보는 의사결정자에게 얼마나 정확하게 평균을 추정할 구 있는지 알려 준다. 그러나, 신뢰구간을 구성하는 일은 하나의 시뮬레이션으로부터 얻어진 출력데이터가 일반적으로 비정체상태(nonstationary)이고 자동상관(autocorrelated)되어 있기 때문에, 전통적인 통계적인 기법을 직접적으로 이용할 수 없다. 이러한 문제를 해결하기 위해 시뮬레이션 출력데이터 분석기법이 사용된다.본 논문에서는 초기편의를 제거하기 위해서 필요한 출력데이터의 제거시점을 찾는 새로운 기법으로, 유클리드 거리(Euclidean distance: ED)를 이용한 방법과 현재 패턴 분류(pattern classification) 문제에 널리 사용 중인 역전파 신경망(backpropagation neural networks: BNN) 알고리듬을 이용하는 방법을 제시한다. 이 기법들은 대다수의 기존의 기법과는 달리 시험수행(pilot run)이 필요 없으며, 시뮬레이션의 단일수행(single run) 중에 제거시점을 결정할 수 있다. 제거시점과 관련된 기존 연구는 다음과 같다. 콘웨이방법은 현재의 데이터가 이후 데이터의 최대값이나 최소값이 아니면 이 데이터를 제거시점으로 결정하는데, 알고기듬 구조상 온라인으로 제거시점 결정이 불가능하다. 콘웨이방법이 알고리듬의 성격상 온라인이 불가능한 반면, 수정콘웨이방법 (Modified Conway Rule: MCR)은 현재의 데이터가 이전 데이터와 비교했을 때 최대값이나 최소값이 아닌 경우 현재의 데이터를 제거시점으로 결정하기 때문에 온라인이 가능하다. 평균교차방법(Crossings-of-the-Mean Rule: CMR)은 누적평균을 이용하면서 이 평균을 중심으로 관측치가 위에서 아래로, 또는 아래서 위로 교차하는 회수로 결정한다. 이 기법을 사용하려면 교차회수를 결정해야 하는데, 일반적으로 결정된 교차회수가 시스템에 상관없이 일반적으로 적용가능하지 않다는 문제점이 있다. 누적평균방법(Cumulative-Mean Rule: CMR2)은 여러 번의 시험수행을 통해서 얻어진 출력데이터에 대한 총누적평균(grand cumulative mean)을 그래프로 그린 다음, 안정상태인 점을 육안으로 결정한다. 이 방법은 여러 번의 시뮬레이션을 수행에서 얻어진 데이터들의 평균들에 대한 누적평균을 사용하기 매문에 온라인 제거시점 결정이 불가능하며, 작업자가 그래프를 보고 임의로 결정해야 하는 단점이 있다. Welch방법(Welch's Method: WM)은 브라운 브리지(Brownian bridge) 통계량()을 사용하는데, n이 무한에 가까워질 때, 이 브라운 브리지 분포(Brownian bridge distribution)에 수렴하는 성질을 이용한다. 시뮬레이션 출력데이터를 가지고 배치를 구성한 후 하나의 배치를 표본으로 사용한다. 이 기법은 알고리듬이 복잡하고, 값을 추정해야 하는 단점이 있다. Law-Kelton방법(Law-Kelton's Method: LKM)은 회귀 (regression)이론에 기초하는데, 시뮬레이션이 종료된 후 누적평균데이터에 대해서 회귀직선을 적합(fitting)시킨다. 회귀직선의 기울기가 0이라는 귀무가설이 채택되면 그 시점을 제거시점으로 결정한다. 일단 시뮬레이션이 종료된 다음, 데이터가 모아진 순서의 반대 순서로 데이터를 이용하기 때문에 온라인이 불가능하다. Welch절차(Welch's Procedure: WP)는 5회이상의 시뮬레이션수행을 통해 수집한 데이터의 이동평균을 이용해서 시각적으로 제거시점을 결정해야 하며, 반복제거방법을 사용해야 하기 때문에 온라인 제거시점의 결정이 불가능하다. 또한, 한번에 이동할 데이터의 크기(window size)를 결정해야 한다. 지금까지 알아 본 것처럼, 기존의 방법들은 시뮬레이션의 단일 수행 중의 온라인 제거시점 결정의 관점에서는 미약한 면이 있다. 또한, 현재의 시뮬레이션 상용소프트웨어는 작업자로 하여금 제거시점을 임의로 결정하도록 하기 때문에, 실험중인 시스템에 대해서 정확하고도 정량적으로 제거시점을 결정할 수 없게 되어 있다. 사용자가 임의로 제거시점을 결정하게 되면, 초기편의 문제를 효과적으로 해결하기 어려울 뿐만 아니라, 필요 이상으로 너무 많은 양을 제거하거나 초기편의를 해결하지 못할 만큼 너무 적은 양을 제거할 가능성이 커지게 된다. 또한, 기존의 방법들의 대부분은 제거시점을 찾기 위해서 시험수행이 필요하다. 즉, 안정상태 시점만을 찾기 위한 시뮬레이션 수행이 필요하며, 이렇게 사용된 시뮬레이션은 출력분석에 사용되지 않기 때문에 시간적인 손실이 크게 된다.

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.4 s.59
• /
• pp.669-685
• /
• 1997

Previous studies, reporting the inverse relationship between osteoarthritis and osteoporosis suggest the existence of possible pathophysiologic mechanisms between them. To examinine the hypothesis that 'bone mineral densities of women with osteoarthritis are significantly higher than that of women without osteoarthritis in Korea', subjects from the health and nutritional examination survey in Kuri city were sampled. Samples were selected through multi-stage sampling frame using established clusters in Kuri city. From August 18 to September 10,1997, the survey was conducted. Among the. total number of selected sample population (1,656 people), response .ate was 52.4 percent (348 men and 519 women). 420 women who took BMD measurement, radiologic exam, and anthropometric exam were selected for the analysis. The analytic results are as follows. 1. General characteristics: Mean BMD was $0.493g/cm^2$, mean age was 43.0, mean BMI was $23.9kg/m^2$. The number of women who experienced menopause was 106, hysterectomy was 19. There were 0 case of osteoarthritis of hip, 64 cases of osteoarthritis of knee, and 2 cases of osteoarthritis of hand. 2. Univariate analysis results: Mean BMD of women with the osteoarthritis of knee was significantly lower than that of women without the osteoarthritis of knee(0.4269 vs. $0.5057g/cm^2$). But, there were too few cases of osteoarthritis of hip and hand, so comparative studies of BMD in osteoarthritis of hip and hand could not be conducted. There were significant differences of BMD among pre-menopause group(0.5204), post-menopause group(0.4206), and hysterectomy group(0.4881). Additionally, there were significant differences of BMD among diabetes group(0.4297), impaired glucose tolerance group(0.4874), and normal group(0.5057). Furthermore, age, parity, BMI, bioimpedance were significantly related with BMD. 3. Multivariate analysis results: To examinine the relationship between osteoarthritis and BMD while controlling the other variables' effects which were significant in the univariate analyses, multiple linear regression analysis was done. But, it was found that osteoarthritis of knee was not a significant variable to BMD anymore. While age and menopause had significant negative relationship with BMD. Diabetes, parity, BMI, and bioimpedance did not have significant relationships with BMD. After stratification of subjects according to menopause, multiple linear regression analyses were done to each strata. Consequently, age in post-menopause group, age and osteoarthritis of knee in hysterectomy group showed significant negative relationship with BMD. The results did not support the many results of other previous studies done with white men and women. further studies of biological plausibility to Korean women are recommended. Also it is suggested that longitudinal study to verify the relationship between osteoarthritis and BMD will be valuable.

• The Journal of Korean Society for Radiation Therapy
• /
• v.29 no.1
• /
• pp.37-48
• /
• 2017

Purpose: The most basic conditions of radiation therapy is to prevent unnecessary exposure of normal tissue. The risk factors that are important o evaluate the dose emitted to the lung and heart from radiation therapy for breast cancer. Therefore, comparing the dose factors of a normal tissue according to the radion treatment position and Seeking an effective radiation treatment for breast cancer through the analysis of the correlation relationship. Materials and Methods: Computed tomography was conducted among 30 patients with left breast cancer in supine and prone position. Eclipse Treatment Planning System (Ver.11) was established by computerized treatment planning. Using the DVH compared the incident dose to normal tissue by position. Based on the result, Using the SPSS (ver.18) analyzed the dose in each normal tissue factors and Through the correlation analysis between variables, independent sample test examined the association. Finally The HI, CI value were compared Using the MIRADA RTx (ver. ad 1.6) in the supine, prone position Results: The results of computerized treatment planning of breast cancer in the supine position were V20, $16.5{\pm}2.6%$ and V30, $13.8{\pm}2.2%$ and Mean dose, $779.1{\pm}135.9cGy$ (absolute value). In the prone position it showed in the order $3.1{\pm}2.2%$, $1.8{\pm}1.7%$, $241.4{\pm}138.3cGy$. The prone position showed overall a lower dose. The average radiation dose 537.7 cGy less was exposured. In the case of heart, it showed that V30, $8.1{\pm}2.6%$ and $5.1{\pm}2.5%$, Mean dose, $594.9{\pm}225.3$ and $408{\pm}183.6cGy$ in the order supine, prone position. Results of statistical analysis, Cronbach's Alpha value of reliability analysis index is 0.563. The results of the correlation analysis between variables, position and dose factors of lung is about 0.89 or more, Which means a high correlation. For the heart, on the other hand it is less correlated to V30 (0.488), mean dose (0.418). Finally The results of independent samples t-test, position and dose factors of lung and heart were significantly higher in both the confidence level of 99 %. Conclusion: Radiation therapy is currently being developed state-of-the-art linear accelerator and a variety of treatment plan technology. The basic premise of the development think normal tissue protection around PTV. Of course, if you treat a breast cancer patient is in the prone position it take a lot of time and reproducibility of set-up problems. Nevertheless, As shown in the experiment results it is possible to reduce the dose to enter the lungs and the heart from the prone position. In conclusion, if a sufficient treatment time in the prone position and place correct confirmation will be more effective when the radiation treatment to patient.

• Korean Journal of Environment and Ecology
• /
• v.26 no.3
• /
• pp.426-436
• /
• 2012

This study was carried out to investigate actual vegetation, the structure of plant community, and ecological succession sere of coastal forest ecosystem in warm temperate climate zone, Taejongdae, Busan City, Korea to provide the basic data for planning of the forest management. As a result of analysis of actual vegetation, vegetation types divided into 35 types, and the area of survey site was $1,750,461m^2$. The ratio of vegetation type dominated by Pinus thunbergii was 80.7%, dominated by Quercus spp. was just 5.0%, and dominated by Carpinus tschonoskii was just 0.4%. Eighteen plots(size is $20m{\times}20m$) were set up and the results analyzed by DCA which is one of the ordination technique showed that the plant communities were divided into four groups which are community I(P. thunbergii community), community II(P. thunbergii-Quercus serrata community), community III(Q. serrata-P. thunbergii community), and community IV(Carpinus tschonoskii-P. thunbergii community). The age of community I was from 38 to 59 years old, that of community II was from 35 to 71 years old, that of community III was from 37 to 53 years old, that of community IV was from 50 to 72 years old, thus we supposed that the age of the study site is about from 38 to 72 years old. We supposed that the successional sere of the study site is in the early stage of ecological succession in the warm temperate climate zone. The dominant species will be changed from P. thunbergii to Q. serrata or Carpinus tschonoskii in the canopy layer, on the other hand, Eurya japonica will be dominant species in the understory layer, and E. japonica and Trachelospermum asiaticum var. intermediumwill be dominant species in the shrub layer for a while. According to the index of Shnnon's diversity(unit: $400m^2$), community I ranged from 0.8640 to 1.3986, community II was from 0.1731 to 1.1885, community III was from 0.8250 to 1.0042, and community IV was from 0.3436 to 0.6986.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.2
• /
• pp.27-44
• /
• 1999

Digital maps produced in Korea are various in scale and include a lot of geographic and attribute data. In this study, it is argued that, to reduce the production cost and the difficulties for renewal, it is necessary to establish the already nationally drawn 1:5,000 scale digital maps as the base maps and simplify them as much as the TIGER files in the U.S. The comprehensive data included in the digital maps in Korea are mostly land use information, which are supposed to be established separately from the digital maps. The land use information system could be maintained and updated cheaply and frequently at the local government level. In response to common needs, the land use information could be imported to GIS and used for analyses. As technologies and societies changes, the Census questions and methodologies should be changed for better uses. Along with GIS, the Census would be developed and processed more reliably and efficiently. Also, it is recommended for Korean government to develop the Census Tract and Block Group system. Current Eup, Myon, Dong as basic units for Census information may not be useful or effective for micro level urban analyses and public service planning activities because of their large population and land areas. It is recommended that optimum population of a Census Tract be 5,000 and a Block Groups 1,500, and one Census Tract includes 1~9 Block Groups. It is recommend that Census Tract and Block Group boundary lines be decided flexibly in light of population, physical features, socio-economic attributes, and tradition. For urban analyses using GIS, socio-economic census data, city government's information such as parcel data and building permit data, survey data, and satellite image data could also be used. The existence of Census Tracts and Block Groups as well as GIS could help for the data and methods to be useful for urban analyses and public service provisions.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.565-578
• /
• 2000

The aim of this study was development of the Straight-Wire Appliance(SWA) suitable lot the treatment or Korean. To accomplish the object of this study, Korean adult with normal occlusion were selected with following criteria : 1) no functional abnormality in the craniofacial area, 2) good dental arch form and posterior occlusal relationship, 3) Angle Class I occlusal relationship, 4) no experience of orthodontic, nor prosthodontic treatment, especially, no dental treatment on labial and buccal surfaces of teeth, 5) good racial profile. Impression were taken for upper and lower dental arches or the selected normal occlusion samples and the orthodontic dental stone models were fabricated. 5 well-trained orthodontists had examined the acquired dental stone models to select study samples which satisfy the Six keys to optimal occlusion of Andrews. 155 pairs of dental stone models (92 pairs of Male, 63 of Female) were finally selected. 3 dimensional digitization were performed with the Coordinate Measuring Machine(CMM, MPC802, WEGU-Messtechnik, Germany) and measuring of Angulation, Inclination, In-and-Out, Molar offset angle and Arch form were accomplished with a measuring software to achieve data for the development of SWA. Before the measurement, error study was performed on the 3 dimensional digitization with CMM, and the analysis of reliability of computerized measuring method adapted in this study and conventional manual method Presented by Andrews was performed. Results of this study were as to)lows : 1. Equi-distance digitization with mesh size 0.25 mm, 0.5 mm and 1.0 mm were acceptable in 3 dimensional digitization of dental stone model with the CMM, and the digitization with 1.0 mm mesh size was recommendable in terms of efficiency. 2. Computerized measuring method with 3 dimensional digitization was more reliable than manual measuring method of Andrews. 3. Data were collected for the development of SWA suitable for the morphological characteristics of Korean with the computerized measuring method with 3 dimensional digitization.