• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.200-208
• /
• 2003

미생물수를 측정하는 가장 정확하고 보편적인 방법은 배양법이다. 그러나 배양법은 많은 시간과 노력이 소요되기 때문에 현장에서 실시간에 준하는 측정법으로 사용하기에는 원천적으로 한계를 가지고 있다. 이러한 한계를 극복하기 위해서는 실시간(real-time) 또는 준실시간(near real-time)으로 미생물을 검출할 수 있는 기술이 요구된다. 표면플라즈몬공명(surface plasmon resonance: SPR)은 생물분자 또는 미생물을 실시간 또는 준실시간으로 검출할 수 있는 센서로서 특이성(specificity)과 정확도(accuracy) 측면에서 일찍이 큰 관심을 받아왔다. 1902년, Wood(1902)는 반사 회절격자를 사용하여 연속광원의 스펙트럼을 관찰한 결과, 회절광 스펙트럼에서 어두운 좁은 밴드를 발견하였으며, Fano(1941)는 이 현상이 surface plasma waves와 관련이 있음을 이론적으로 밝혔다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.389-389
• /
• 2011

최근 생체분자 구조 연구가 의료진단, 생명 현상 규명 및 의약품 개발 등 다양한 분야에 응용되고 있으나 대부분의 분석방법이 제한적이어서 새로운 기술 개발의 필요성이 증대하고 있다. 종래의 DNA 등의 생체분자의 분석은 형광염료를 이용한 방법이 주로 이용되었다. 형광염료는 단백질을 포함한 여러 물질들에 대해 반응하지 않기 때문에 분석에 제한이 있으며, 이와 같은 단점을 보완하는 방법으로 SPR (surface plasmon resonance) 분석법이 연구되었다. SPR은 형광염료 분석에 필수적인 레이블링(labeling) 등의 전처리 과정 없이 높은 민감도로 분석이 가능한 장점이 있다. 한편, 그래핀은 뛰어난 전자기적 성질과 기계적 성질 을 가지는 반금속(semimetal)으로, 실험실 규모에서 안정적인 합성이 실현되면서 그 응용 분야에 대한 연구가 활발히 이루어 지고 있다. 그래핀은 큰 표면적 대 부피비를 가지며, 이는 검출물질과의 반응성이 좋아야 하는 센서기술에 있어서 장점으로 작용한다. 특히, 비금속성을 띠는 단층 그래핀을 여러 장 겹치면 금속성을 갖게 되기 때문에 SPR 센서의 금속 필름으로 응용이 가능하다. 본 연구에서는 SPR 현상을 이용하는 광섬유 센서의 감도와 정확도를 증진시키기 위해 광섬유 표면에 그래핀을 적용하였다. 광섬유는 상부 피복과 클래딩을 제거하여 코어를 노출시킨 후, 다층 그래핀 필름을 코팅함으로써 검출부를 구성한다. 그 후, DNA-biotin 용액, DNA-biotin 용액, 그리고 Streptavidin 단백질 복합 용액에 대한 검출기 신호를 분석하였다. 구성된 센서에 각 용액을 1 ${\mu}{\ell}$ 씩 반응시켜 분광계로 파장에 따른 광강도를 측정하는 실험을 수행했으며, 450 nm에서 460 nm 범위의 푸른빛의 광원을 사용하였다. 그래핀 필름의 유무에 따라 확연히 구분되는 경향을 보이는 결과를 얻었고 그래핀 필름이 기존 SPR 센서의 금속박막을 대체 할 수 있음을 확인하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.795-800
• /
• 2009

Surface plasmon resonance (SPR) has been widely used for biological and chemical sensing applications. The present study investigates numerically the optical characteristics for the single Au film and bimetallic Ag/Au film SPR configurations by using the multiple beam interference matrix (MBIM) method. We use the prism coupling method, especially Kretschmann configuration for excitation of surface plasmon wave (SPW). The estimated results of reflectance, phase shift and magnetic field intensity enhancement factor are provided for finding out the optimum configuration with high sensitivity for SPR measurement. As a result, the optimum thicknesses are found to be 52 nm for a single Au film and 5 nm to 36 nm for bimetallic Ag-Au film. From the comparison of full width half maximum (FWHM) values for reflectance, phase shift, and enhancement of magnetic field intensity, it is concluded that the highest sensitivity can be obtained when using the phase shift for SPR sensor.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.3
• /
• pp.433-436
• /
• 2012

We propose a novel micro surface plasmon resonance (SPR) sensor system based on polymer materials. The proposed SPR system consists of the incident medium with polymer waveguide and the gold thin film for sensing area. Using a polymer optical waveguide instead of a prism in SPR sensing system offers miniaturization, low cost, and potable sensing capability. The whole device performance was analyzed using the finite-difference time domain method. The optimum gold thickness in the attenuated total reflection mirror of polymer waveguide is around 50 nm and the resonance angle to generate surface plasmon wave is 68 degrees.

• Journal of Sensor Science and Technology
• /
• v.29 no.2
• /
• pp.118-122
• /
• 2020

This paper proposes a specific sensor-design strategy and the possibility of improving the sensing performance, which can be obtained by replacing part of the existing plasmonic sensor based on the Kretschmann configuration method with an effective refractive-index layer. By replacing the metal layer with an effective refractive-index layer composed of gold and the material to be sensed, an improvement in the detection performance, accompanied by an increase in the sensed incident angle, is observed, and the gold-composition ratio that demonstrates the best result is presented. Subsequently, an increase in the sensed incident angle generated in the previous step can be suppressed by randomly etching a portion of the prism adjacent to the metal layer in a sub-wavelength scale. Finally, this study analyzes the optimization of the metal-layer thickness in a given sensor structure. An effective refractive thin-film surface plasmon resonance sensor design that can achieve optimal sensing performance is then proposed.

• Food Engineering Progress
• /
• v.14 no.1
• /
• pp.49-53
• /
• 2010

Surface plasmon resonance (SPR) which is utilized in thin film refractometry-based sensors has been concerned on measurement of physical, chemical and biological quantities because of its high sensitivity and label-free feature. In this paper, an application of SPR to detection of alcohol content in wine and liquor was investigated. The result showed that SPR sensor had high potential to evaluate alcohol content. Nevertheless, food industry may need SPR sensor with higher sensitivity. Herein, we introduced a nano-technique into fabrication of SPR chip to enhance SPR sensitivity. Using Langmuir-Blodgett (LB) method, gold film with nano-structured surface was devised. In order to make a new SPR chip, firstly, a single layer of nano-scaled silica particles adhered to plain surface of gold film. Thereafter, gold was deposited on the template by an e-beam evaporator. Finally, the nano-structured surface with basin-like shape was obtained after removing the silica particles by sonication. In this study, two types of silica particles, or 130 nm and 300 nm, were used as template beads and sensitivity of the new SPR chip was tested with ethanol solution, respectively. Applying the new developed SPR sensor to a model food of alcoholic beverage, the sensitivity showed improvement of 95% over the conventional one.

• Journal of Sensor Science and Technology
• /
• v.24 no.6
• /
• pp.423-428
• /
• 2015

A bimetallic chip made of gold and silver was investigated in intensity interrogation mode to confirm enhancement of the SPR sensor resolution. Both reflectance curves of the bimetallic chip and the conventional gold chip was acquired and compared. The line width of the reflectance curve of the bimetallic chip was narrower than that of the conventional Au chip, resulting in steeper tangential slope. The reflectance was monitored at the angle related to the steepest tangential slope. The change in reflectance of the bimetallic chip was larger than that of the Au chip. The critical angle was analyzed by differentiating the reflectance with respect to incident angle twice. Acquiring the critical angle regarding to the sample informs the refractive index of the sample. Using various concentration of Bovine Serum Albumin, we confirmed that refractive index was linearly related to variation of reflectance of the bimetallic chip.

• Journal of Sensor Science and Technology
• /
• v.28 no.4
• /
• pp.262-265
• /
• 2019

The effect of inter-band transition on surface plasmon resonance in gold thin film was investigated. We induced localized inter-band transition in the film by using incident light on its surface from a green laser (532 nm) source, and the surface plasmon resonance for inter-band transition was investigated at different wavelengths. It was determined that the reflectivity of blue light (450 nm) was significantly reduced in the region where the green laser was incident. We demonstrated that this decrease is mainly due to the coupling between the blue light and the surface plasmon resonance of excited electrons in higher energy states, based on experimental results for the incident and polarization angle-dependent reflectivity of the blue light.

• Journal of Sensor Science and Technology
• /
• v.30 no.5
• /
• pp.326-330
• /
• 2021

Reactions between gold (Au) surface plasmon resonance (SPR) chips and bovine serum albumin (BSA) dissolved in solutions of different pH were investigated. The charge on the BSA depends on the pH of the solution in which it is dissolved. Thus, dissolving BSA in different pH solutions resulted in different charges of BSA. Among the BSA dissolved in solutions with pH 4.01, 7.4, and 10.01, the SPR response was the highest for BSA dissolved in the solution of pH 4.01. To eliminate the response variation owing to the difference in the refractive indices of the solutions, phosphate buffered saline (PBS) was injected into the system after the reaction of BSA with the Au SPR chip had happened. In this case too, the BSA dissolved in the solution with pH 4.01 exhibited the highest response. This may be attributed to the non-uniform distribution of ionic patches on the BSA, which can induce electrostatic attraction to the surface even though BSA has a positive charge at pH 4.01, and the absolute values of the net charge of BSA at pH 4.01 and 7.4 were very close.

• Journal of Biosystems Engineering
• /
• v.35 no.2
• /
• pp.116-123
• /
• 2010

Rapid detection of foodborne pathogens has been a major challenge for the food industry. Salmonella contamination is well known in all foods including pasteurised milk. The possibility of specific detection of Salmonella Enteritidis by surface plasmon resonance (SPR) biosensor was explored using a commercially available portable SPR sensor. Self assembly technique was adopted to immobilize anti-Salmonella antibodies on the gold sensing surface of the SPR sensor. The concentration of polyclonal antibody for use in the SPR biosensor was chosen to 1.0 mg/mL. Experiments were conducted at near real-time with results obtained for one SPR biosensor assay within 1 hour. The limit of detection for Salmonella Enteritidis was determined to be $10^6$ CFU/mL in both PBS buffer and milk samples. The assay sensitivity was not significantly affected by milk matrix. Our results showed that it would be possible for employing the SPR biosensor to detect Salmonella Enteritidis in near real-time.