• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.595-605
• /
• 2018

In recent years, researches on organic-inorganic coating films have conducted a nanocomposite system composed of organic resin matrices having excellent flexibility and chemical stability and inorganic materials having excellent mechanical properties. The o-phenylphenoxyethyl acrylate (OPPEA) used as the acrylate monomer has a high refractive index of 1.58, and the bisphenol A ethoxylate diacrylate (BAEDA) has a low refractive index but improves the chemical stability of the organic resin. In addition, zirconia used as an inorganic material exhibits excellent durability and optical properties. In this study, the BAEDA contents in acrylate monomer were controlled to produce a film with suitable optical transparency. And optimum conditions were established by comparing the changes in surface properties of PET films detected with pencil hardness tester, Abbe's refractometer, and UV-vis spectrophotometer. The hydrophobicity and the dispersibility of zirconia in acrylate monomer were much improved after modification with ${\gamma}$-methacryloxypropyltrimethoxysilane (MPS), which is a silane coupling agent. And the existence of ester C=O bond peak at $1716cm^{-1}$ introduced by MPS through FT-IR ATR spectrophotometer confirmed the completion of surface modification of zirconia with MPS. In addition, the presence of silicon atom on the surface modified zirconia was also proved using X-ray fluorescence spectrometer. When the photocurable hybrid coating was prepared by introducing chemically modified zirconia into acrylate monomer, the refractive index of this coated PET film was improved by 1.2%, compared to the only acrylate coated PET film. The homogeneous distribution of zirconia in acrylate coating layer on PET film was also identified through SEM/EDS mapping analysis technique.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.1
• /
• pp.135-140
• /
• 2014

Pre-storage ultra-violet (UV) light treatment on fresh produce is known to inactivate the contaminated microorganisms, activate the defense system, and delay ripening extending the shelf life. As UV light emitting diode (LED) becomes available at a relatively low price, continuous or intermittent UV treatment during chilled storage is possible in a container or package. This study attempted an in situ UV LED treatment on fresh produce stored under a refrigerated container in order to see its potential in the fresh produce storage and further optimize its application conditions. The effect of in-container UV LED irradiation on the quality preservation of shredded carrots was investigated in the air and modified atmosphere (MA) conditions. Two sets of experiment with Escherichia coli inoculation and with natural microbial flora in the air (two 30 minute on-off cycles of 1 $diode/dm^2$ per day at a location above 2 cm) showed a clear and significant effect of the UV LED irradiation on the suppression of microbial growth: 280 nm was the most effective by maintaining a lower microbial count by at least 0.5 log (CFU/g) throughout the 6 day storage period. The carotenoids content of shredded carrots subjected to UV LED treatment at 365 and 405 nm in the air was higher than that of the control shredded carrots. In MA condition of $O_2$ of 1.2~4.3% and $CO_2$ of 8.4~10.6% being indifferent with LED wavelengths, 280 nm UV LED irradiation was also effective in inhibiting the microbial growth. While there was no observed difference in the carotenoids content between untreated and UV LED-treated shredded carrots in MA, UV LED irradiation at 365 and 405 nm was slightly better in DPPH radical scavenging activity. The use of UV LED in storage container or package seems to give the benefits of preserving the microbial and nutritional qualities of minimally processed fruits and vegetables.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06a
• /
• pp.109-111
• /
• 2006

본 논문은 애니메이터로 하여금 얼굴 표정들의 공간으로부터 일련의 표정을 선택하게 함으로써 3차원 아바타의 표정을 실시간적으로 제어할 수 있도록 하기 위한 표정공간의 생성방법에 관하여 기술한다. 본 시스템에서는 약 2400여개의 얼굴 표정 프레임을 이용하여 표정공간을 구성하였다. 본 기법에서는 한 표정을 표시하는 상태표현으로 얼굴특징 점들 간의 상호거리를 표시하는 거리행렬을 사용한다. 이 거리행렬의 집합을 표정공간으로 한다. 그러나 이 표정공간은 한 표정이 다른 표정까지 이동할 때 두 표정간의 직선경로를 통해 이동할 수 있는 그런 공간이 아니다. 본 기법에서는 한 표정에서 다른 표정까지 거쳐 갈 수 있는 경로를 캡쳐된 표정 데이터로부터 근사적으로 유추한다. 우선, 각 표정상태를 표현하는 거리행렬간의 거리가 일정 값 이하인 경우 두 표정을 인접해 있다고 간주한다. 임의의 두 표정 상태가 일련의 인접표정들의 집합으로 연결되어 있으면 두 표정간에 경로가 존재한다고 간주한다. 한 표정에서 다른 표정으로 변화할 때 두 표정간의 최단경로를 통해 이동한다고 가정한다. 두 표정간의 최단거리를 구하기 위해 다이내믹 프로그래밍 기법을 이용한다. 이 거리행렬의 집합인 표정공간은 다차원 공간이다. 3차원 아바타의 얼굴 표정 제어는 애니메이터들이 표정공간을 항해할 때 실시간적으로 수행된다. 이를 도와주기 위해 표정공간을 차원 스케일링 기법을 이용하여 2차원 공간으로 가시화하였고, 애니메이터들로 하여금 본 시스템을 사용하여 실시간 표정 제어를 수행하게 했는데, 본 논문은 그 결과를 평가한다.참여하는 빈들 간의 관계를 분석하여 워크플로우에 대한 성능 측정이 가능하도록 한다. 또한 제안된 메트릭을 통하여 EJB 어플리케이션의 성능 향상을 도모할 수 있도록 한다.로 표면 위로 자라났고, 부종은 창상 밑 조직까지 감소하였으며, 육아조직은 교원질 섬유로 대체되었다. 창상 유발 21일 후, 다른 창상에 비해, HG 처치창은 유의적으로 창상 표면이 거의 재생성 상피로 덮였으며, 육아조직은 창상 유발 14일 후와 비교해서 유의적으로 교원질 섬유로 대체되었다. 위의 모든 결과에서 보듯이, 개에서 전층피부 창상의 처치 시 HG의 사용은 HC와 생리 식염수에 비해 창상치유 복구기의 치유 속도를 촉진하는 것으로 사료된다.시범학교의 자녀를 들 부모들은 환경관련문제에 대한 의식 및 환경관련 제품에 대한 구매행동의 변화가 두드러지게 나타났다.EX>$d^{2+}$ + SA처리구는 두 화합물의 이중 효과에 의해 전반적인 생리 활성을 억제하여, 결국에는 식물의 고사를 유도하는 것으로 사료된다.목에 대한 보안'이 가장 중요한 것으로 나타났다. 본 연구에서는 솔루션 선정요인에 관한 중요도를 e-마켓플레이스의 유형과 산업 별로 평가해보았는데, 여기에서 밝혀진 중요도를 통해 e 마켓플레이스를 구축하고 자 하는 기업은 솔루션을 자체 개발하거나 구입할 때 올바른 의사결정을 할 수 있다. 그리고 솔루션을 제공하려는 기업측면에서는 e-마켓플레이스를 구축하고자 하는 기업에게 유형과 산업별로 적절한 솔루션을 제공할 수 있다.순환이 뇌대사 및 수술 후 신경학적 결과에 보다 유익한 효과를 제공해 줄 수 있음

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.3
• /
• pp.195-201
• /
• 2016

Eddy current testing (ECT) is commonly applied for the inspection of automated production lines of metallic products, because it has a high inspection speed and a reasonable price. When ECT is applied for the inspection of a metallic object having an uneven target surface, such as the spline gear of a spline shaft, it is difficult to distinguish between the original signal obtained from the sensor and the signal generated by a defect because of the relatively large surface signals having similar frequency distributions. To facilitate the detection of defect signals from the spline gear, implementation of high-order filters is essential, so that the fault signals can be distinguished from the surrounding noise signals, and simultaneously, the pass-band of the filter can be adjusted according to the status of each production line and the object to be inspected. We will examine the infinite impulse filters (IIR filters) available for implementing an advanced filter for ECT, and attempt to detect the flaw signals through optimization of system design parameters for detecting the signals at the system level.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.75-82
• /
• 2017

In this study, a new cleaning method using carbon dioxide pellet in the part of underground pipe cleaning method was proposed and verified. First of all, the commentary of The Society for Protective Coatings was examined in detail to determine the quantitative cleaning effects. Also, field tests were carried out to confirm the application of the new method. In the test, the surface condition of inner pipe after the application of the new method was investigated and two types of nozzles were compared in the tests. Also, the tests to measure the final impact pressure of air and carbon dioxide pellet mixtures were performed to investigate the losses of air pressure were investigated. Through this verification on the new method, it was found that the new method is very efficient for the removal of the rust in the pipe cleaning works. Also, the nozzle with excellent cleaning effect was also selected. As a result, this method will be able to largely contribute to the recycling of $CO_2$ which is limited to the use as a cooling agent or the storage of waste.

• Economic and Environmental Geology
• /
• v.34 no.6
• /
• pp.595-600
• /
• 2001

Recently, interests in subsidence hazard have been increased due to the underground construction such as subway construction and managements of abandoned mines. GIS analysis of subsidence hazard has a lot of advantages in handling of spatial data and managing database. For better result of GIS analysis, there are some necessities of modifying previous subsidence theory and model. To take surface profile into account allows the application of complicated topology. Furthermore. for 3-dimensional analysis. two subsidence profile curves that are perpendicular to each other should be considered simultaneously. Through these modifications, the model for subsidence analysis using GIS can be established. With ideal case of cavities and other conditions, GIS analysis was accomplished and meaningful results were produced. More realistic properties of cavity. soil layers, groundwater condition and topology will enable GIS analysis method to produce more reliable result and to widen the area of applications.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.5
• /
• pp.629-639
• /
• 2010

To evaluate the performance of high rate coagulation system(HRCS) for CSOs treatment, fundamental function of lab scale HRCS has been tested by using the Jar tester and lab scale HRCS. The optimum pH dose by Streaming Current value was found in the range of 5.3~6.0 in Fe(III), and in the range of 5.8~6.6 in Al(III) and the optimum chemical dose were 0.44mM of $Al_2(SO_4)_3$ and 0.93mM of $FeCl_3$. The removal efficiencies at optimum $Al_2(SO_4)_3$ dose were 75%($TCOD_{Cr}$), 97%(TP), 95%(SS) and 96%(turbidity), respectively. And the removal efficiency of particles with less than $5{\mu}m$ of diameter was 70% and that of particles with higher than $5{\mu}m$ of diameter was 90%. The optimum alum dose in lab scale HRCS was 150mg/L, and the treatment efficiency was the best with addition of 1.0mg/L polymer. The effect of Micro sand addition was not clear, because the depth of the sediment tank in lab scale HRCS was not long enough. But the HRT of this lab scale HRCS was able to be shorten less then 7 minutes by adding the micro sand. The surface loading rates with respect to using different chemicals were 0.43m/h with alum only, 5.78m/h with alum and polymer and 6.22m/h with alum, polymer and micro sand. As a result, HRCS using coagulant, polymer and micro sand developed in this study was evaluated to be very effective for CSOs treatment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.248-251
• /
• 2016

This thesis has discussed how to recognize and convert raised letters on tire to data and collect such data. Unlike the existing recognition system, the system presented by this thesis recognizes raised letters on tire through detecting letters after converting the Kinect camera image into image data in the preprocessing stage. After then, numbers and letters are analyzed through image improvement by use of binary images, noise filter, etc. In the recognition stage, letter distinction is used and raised letters on tire are recognized 100% through correction of errors by way of the correction algorithm for tire data recognition errors. In this paper it will be the development of a method of recognizing characters and the tire technology. Although there are many ways to the already recognized characters, Tire characters requires a technique different from the more general character recognition. For this reason and to develop additional technical methods and algorithms for character recognition.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.597-601
• /
• 2013

In this study, we present simple microfluidic approach for the synthesis of monodisperse microcapsules by using droplet-based system. We generate double emulsion through single step in the microfluidic device having single junction while conventional approaches are limited in surface treatment for the generation of double emulsion. First, we have injected disperse fluid containing FC-77 oil and photocurable ethoxylated trimethylolpropane triacrylate (ETPTA) and water containing 3 wt% poly(vinyl alcohol) (PVA) as continuous phase into microfluidic device. Under the condition, we easily generate double emulsion with high monodispersity by using flow focusing. The double emulsion droplets are transformed into microcapsules under the UV irradiation via photopolymerization. In addition, we control thickness of double emulsion's shell by controlling flow rate of ETPTA. We also show that the size of double emulsions can be controlled by manipulation of flow rate of continuous phase. Furthermore, we synthesize microcapsules encapsulating various materials for the application of drug delivery systems.

• Journal of Korea Multimedia Society
• /
• v.5 no.4
• /
• pp.426-433
• /
• 2002

In this paper, we have studied the images which have been reconstructed by using combination of images acquired by the variation of operating frequency. When inner images have been reconstructed, they have been superposed by the surface state effect. In this case, the images of the phase object can be enhanced by the contrast of inner images. In this experiment, there are two kinds of specimens, one is a reference block haying 1/4T, 1/2T, 3/4T side drilled holes as main run piping material 111 the steam generator in NPP(Neuclear Power Plant)s and the another is a part of a hemisphere type specimen having about 1-2㎜ distance gap. It has been shown that the two results of defect shapes have better than before in this processing and phase contrast grow about twice. And we have constructed the acoustic microscope by using a quadrature detector that enables to acquire the amplitude and phase of the reflected signal simultaneously Further more ore have studied the reconstruction method of the amplitude and phase images and the enhancement method of the defect images contrast.