• Journal of the Korean Magnetics Society
• /
• v.18 no.3
• /
• pp.98-102
• /
• 2008

Dependence of the exchange bias and coercivity as surface magnetic anisotropy and ferromagnet materials for $[Pd/Co]_N$ and $[Pd/Co,(CoFe)]_N$/FeMn multilayers with perpendicular magnetic anisotropy were investigated. The coercivity was proportionally increased to 670 Oe by increasing stack number N in Ta(2.1 nm)/[Pd(3.1/N)/$Co(1.2/N)]_N$/Ta(2.1) multilayers with perpendicular magnetic anisotropy. Also, the coercivity in exchange biased multilayer was tend to increased by increasing stack number N. But coercivity of each materials have been in order of Co (600 Oe), $Co_5Fe_5$ (520 Oe) and $Co_8Fe_2$ (320 Oe) as function of the ferromagnet materials. The other side, exchange force of each materials is 300 Oe when the reiteration layer number N is 3. In over number of reiteration layer 3, they maintained coercivity between 200 Oe and 300 Oe.

• Tunnel and Underground Space
• /
• v.15 no.4 s.57
• /
• pp.288-295
• /
• 2005

Many mechanical defects originated from various geological causes make rock mass exhibit anisotropic characteristics. Understanding how the stress distribution occurs in anisotropic rock mass is, therefore, very important for the design of footings on rock and rock structures. In this study, the patterns of elastic stress distribution, developed by acting line load on the surface, in transversely isotropic was investigated. The influence of joint stiffness, joint spacing, and dip angle on the stress distribution was examined. By assuming the Mohr-Coulomb criterion as joint slip condition, the development of joint slip zone was also discussed.

• Geophysics and Geophysical Exploration
• /
• v.22 no.1
• /
• pp.21-28
• /
• 2019

We perform a 3D tomographic inversion using surface wave dispersion curves to obtain S-velocity model and radial anisotropy beneath Saudi Arabia. The Arabian Peninsula is geologically and topographically divided into a shield and a platform. We used event data with magnitudes larger than 5.5 and epicentral distances shorter than $40^{\circ}$ during 2008 ~ 2014 from the Saudi Geological Survey. We obtained dispersion curves by using the multiple filtering technique after preprocessing the event data. We constructed SH- and SV-velocity models and consequently radial anisotropy model at 10 ~ 60 km depths by inverting Love and Rayleigh group velocity dispersion curves with period ranges of 5 ~ 140 s, respectively. We observe high-velocity anomalies beneath the Arabian shield at 10 ~ 30 km depths and low-velocity anomalies beneath the Arabian platform at 10 km depth in the SV-velocity model. This discrepancy may be caused by the difference between the Arabian shield and the Arabian platform, that is, the Arabian shield was formed in Proterozoic thereby old and cold, while the Arabian platform is covered by predominant Paleozoic, Mesozoic, and Cenozoic sedimentary layers. Also we obtained radial anisotropy by estimating the differences between SH- and SV-velocity models. Positive anisotropy is observed, which may be generated by lateral tension due to the slab pull of subducting slabs along the Zagros belt.

• The Korean Journal of Rheology
• /
• v.4 no.1
• /
• pp.52-61
• /
• 1992

초고분자량 폴리에틸렌을 파라 크실렌에 녹인 희박 용액에 전단흐름을 가해 섬유를 뽑아내는 방법에 대해 연구하였다. 표면성장이라 불리는 이 방법을 용액내에서 회전하는 rotor 의 표면에 흡착된 젤 층에, 결정성이 강한씨(seed)를 접촉시킴으로써 엉킨 분자쇄들이 전단력에 의해 신장되어 분자의 자유에너지가 증가하도록 하여 연속적으로 고강력, 고탄성 률 결정을 뽑아내게 한 것이다. 이표면성장법으로 섬유를 얻는데 있어서 결정화온도 rotor 속도, 권취속도 및 고분자 농도와 같은 결정화 변수를 변화시키면서 섬유의 물리적 성질에 미치는 영향을 관찰하였다. 이방법으로 섬유를 성장시키면 열역학적 평형온도(118.6$^{\circ}C$) 이상 인 12$0^{\circ}C$에서 성장시켰을 때 133GPa의 인장 탄성계수 3.1%의 절단신도에서 5.04GPa의 고 강력을 갖는 섬유를 얻을수 있었다. 또한 이방법에 있어서는 결정화 온도가 물리적 성질에 가장 큰 영향을 미치는 인자로 작용하였다, 고분자 농도의 영향은 0.7wt.% 이상에선 물리적 성질이 더 이상 개선되지 않았으며 오히려 장력의 증가로 불안정한 성장을 보였다. 또한 0.5wt%이하에서는 젤층의 형성이 둔화됨을 볼수 있었다. 결국 물리적 성질의 측면에서 볼 때 0.5~0.7wt%에서 최적조건을 보여주었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2004.02a
• /
• pp.78-78
• /
• 2004

• Journal of Welding and Joining
• /
• v.13 no.4
• /
• pp.30-35
• /
• 1995

전자기기의 소형화는 앞으로도 계속 진행될 것이므로, 이에 필요한 Fine Pitch 또는 고밀도 실장기술의 개발이 지속적으로 요구될 것으로 생각된다. 앞에서 언급한 3가지 Fine Pitch 표면실장을 위한 Solder 합금의 공급 방법중에서 종래의 Screen Print 방법과 Projected Solder Pre-coat 방법은 0.3mm Pitch가 한계인 것으로 생각되며, Super Solder Pro-coat 방법은 좀 더 Fine Pitch 까지도 사용 가능한 기술 로 생각된다. 이외에도 0.1mm 보다 미세한 Pitch의 표면실장을 위하여, Solder에 의한 접합이 아닌, 이방성 도전 접착제와 같은 도전성 매개체를 통하여 접촉에 의한 표면 실장의 개념도 도입하고 있다.

• Journal of Korea Game Society
• /
• v.10 no.4
• /
• pp.81-90
• /
• 2010

In this paper, an efficient method is proposed to produce photorealistic images of woven fabrics without empirical data such as the measured BRDFs(bidirectional reflectance distribution functions). The proposed method is applicable both to ray tracer based offline renderers and to realtime applications such as games. The proposed method models the reflectance properties of woven fabric with alternating anisotropy and deformed MDF(microfacet distribution function). The procedural modeling of the yarn structure effectively and efficiently reproduces plausible rendering of woven fabric. The experimental results show the proposed method can be successfully applied to photorealistic rendering of diverse woven fabric materials even in interactive applications.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.67.1-67.1
• /
• 2017

구리는 탄성이방성이 큰 재료로 Si 박막상에 성장시키면 (111) 방향으로 우선 배향된 박막을 얻을 수 있다. 본 연구는 이러한 (111) 우선 방위를 갖는 Cu 박막의 전기도금층의 재결정 후의 매우 평탄한 표면을 갖는 박막에서 에칭에 따른 박막의 단차와 표면형상을 통해 결정방위별 에칭 특성을 비교 분석한 결과이다. 10 vol% 질산용액에서 에칭한 결과는 구리의 용해에 따라 각 결정면에 대한 고유의 facetted surface morphology를 나타내며, 대표적인 결정 방위인 (111), (110), (100)에 대해 triangular flake, ridge and rectangular pyramidal shapes을 나타내는 것을 알 수 있었다. 에칭속도의 정량적 측정을 위해 120초간 2.2M 농도의 질산용액으로 에칭을 실시하였고, nanosize의 as-plated initial region, (111), (110), (100) oriented regions의 각각에서 383, 270, 276, 317 nm/min의 에칭속도를 갖는 것을 확인하였다. Facet surface의 관찰을 통해 에칭반응이 (111) front surface를 갖는 열역학적 평형상태에서 일어나며, 이러한 결정방위별 에칭속도 차이는 각 결정S면이 갖는 Kink or ledge의 밀도의 차이에 기인할 것으로 판단된다. 즉, 에칭이 평형상태에서 step flow mechanism에 의해 열역학적 평형상태를 유지하면서 진행이 된다. 본 연구는 향후 다양한 에칭관련 용액 효과, 구리 박막의 응력 및 불순물에 의한 효과를 볼 수 있는 기본 방법을 제공해 줄 것으로 기대한다.

• Journal of the Korean Magnetics Society
• /
• v.10 no.2
• /
• pp.86-92
• /
• 2000

The spin wave absorption spectra are obtained by a simultaneous solution of the Maxwell equation and the Gilbert equation considering the boundary condition of electromagnetic wave and magnetization in the film surfaces. The physical parameters that influence the absorption energy are thickness, exchange stiffness constant, surface magnetic anisotropy, magnetization. damping factor, electric resistivity of the thin film. We investigated how these parameters affect the resonance field, the linewidth and the intensity of the spin wave spectrum.

• Journal of Adhesion and Interface
• /
• v.20 no.4
• /
• pp.155-161
• /
• 2019

Understanding charge transport anisotropy at the interface of conjugated nanostructures basically gives insight into structure-property relationship in organic field-effect transistors (OFET). Here, the anisotropy of the field-effect mobility at the interface between 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS-pentacene) single crystal with cofacial molecular stacks in a-b basal plane and SiO gate dielectric was investigated. A solvent exchange method has been used in order for TIPS-pentacene single crystals to be grown on the surface of SiO₂ thin film, corresponding to the charge accumulation at the interface in OFET structure. In TIPS-pentacene OFET, the anisotropy ratio between the highest and lowest measured mobility is revealed to be 5.2. By analyzing the interaction of a conjugated unit in TIPS-pentacene with the nearest neighbor units, the mobility anisotropy can be rationalized by differences in HOMO-level coupling and hopping routes of charge carriers. The theoretical estimation of anisotropy based on HOMO-level coupling is also consistent with the experimental result.