• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1747-1753
• /
• 2001

This paper describe the design and fabrication of a SMD type Wilkinson power divider for PCS basestation. It has been designed for commercial power amplifier system by HP-ADS and fabricated with the size 0.56 $\times$ 0.35 inches. As a result, the power divider was well-operated in the frequency ranges of 1.75 ∼ 1.98GHz for the application of PCS system. The power divider reveals insertion loss 0.2dB, isolation -19.8dB, amplitude balance 0.02dB, phase balance 0.5o, input and output impedance matching -20.6dB respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.30-36
• /
• 2009

Various types of ultra-wideband components with 10's of GHz bandwidth have been developed utilizing a uniplanar ultra-wideband balun, which is a simple microstrip-to-coplanar stripline (CPS) transition structure with the operating frequency range from near DC to over 40 GHz. Developed ultra-wideband components include antennas, mixers, doublers, and detectors in a carrier type and in a surface mountable type. One of surface mountable components, for example, single balanced doubler has output frequency 8 ~ 28 GHz. These high-Performance, low-cost ultra-wideband components may replace expensive conventional components, and also can be used to develop new multi-GHz OWE application areas.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.1
• /
• pp.23-28
• /
• 2018

Under the 4th Industrial Revolution, implementation of Smart Factory in the field of surface mounting is an emerging issue. In the field of surface mounting, many researches are going on in line with these changes. Among them, we analyzed the method of optimizing the solder printing process which is a core process and the influence of the external factors affecting the printing efficiency. In this analysis, the Big Data provided by the SPI Machine was used to approach the statistical method, and the possibility of predicting the result through simulation with reliable results was confirmed. I hope this study contributes a little to the Smart Factory implementation.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.1-7
• /
• 1998

In this paper, SMD type backward wave 3dB coupler for PCS basestation application was designed, fabricated and measured. We designed that it could be replaced for commercial basestation system and it was 0.56 $\times$ 0.35 inches size. The test results show that coupler is well operated within frequency range of 1.75 ~ 1.98GHz, which is defined on PCS system. The coupler reveals insertion loss 0.295dB, isolation -30.31dB, amplitude balance 0.05dB, phase balance 0.02$^{\circ}$, input and output impedance matching -30.38dB, -39.72dB, respectively.

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.3
• /
• pp.79-92
• /
• 1994

Surface mount technology has been evolving in the electronics industries. Efficient operation of surface mounters is closely related with the productivity of the electronic products. In this study, modeling and optimal algorithm for allocating feeders and sequencing mounting jobs in the rotary type surface mounter, which consider all the constraints, in the hardware and are easy to be used in the field, are developed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.570-573
• /
• 1996

The evaluation test for the operation of rotary type surface mounters which consist of the reel axis, the index table and the X-Y table, has been performed by comparing the new method with the old one in only fields. Because the problem seeking for the optimal operation of rotary type surface mounters, is NP complete, it is almost impossible to get the optimal solutions of large problems. This paper deals with a dynamic network modeling, which can reduce the effort, the cost, and the time used for the performance test of rotary type surface mounters.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.57-57
• /
• 2000

The purpose of this paper is show that an chip mounter can be modeled by stochastic petri nets, and that the simulator to verify a fitness of the program to assemble. The chip mounter can be constructed by using the petri net class (CPetriNet) based on the object-oriented programming. By using this simulator, we can get the information about the description of motion of the chip mounter, and moreover, we can evaluate the productivity.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.4
• /
• pp.122-128
• /
• 1996

In high speed and high precision assembly systems such as a surface mounting device and robotend effector, the contact force control is required. As the operation repeats, the repetitive control is applied to reduce the periodic contact force errors. Since high order unmodelled dynamics are easily excited in contact force control, a Q filter was introduced and its robust stability was analyzed. Simulation and Experimental results show the effectiveness of the algorithm.

• 전자공학회논문지 IE
• /
• v.48 no.4
• /
• pp.7-12
• /
• 2011

This paper described a metal mount RFID tag that works reliably on metallic surface. The proposed method is to use commercial RFID tags, Styrofoam103.7 material is attached on back side of RFID tag. Styrofoam103.7 material which has 2.5 mm thickness and 1.03 relative permittivity, was attached on back side of RFID tag. In order to verify the performance of proposed method, we evaluated the experiment on the supply chain system of electric transformers using RFID. The experimental results on supply chain of electric transformers show that the proposed tags can communicate with readers from a distance of 2 m. The results of recognition rates are comparable to commercial metallic mountable tags.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.697-702
• /
• 2000

The paper considers the problem of improving the productivity of surface mounting in the printed circuit board(PCB) assembly line. This problem is generally divided into two problems ; real assignment problem and pick-and -place sequencing problem which are known to have no polynomial time algorithms. In the last ten years algorithm designers have been trying to solve them separately. However they need to be solved jointly because they are highly interrelated. This paper proposes an evolutionary algorithm which can consider the two problems jointly and thus yield a better solution. In order to evaluate the proposed algorithm computer simulation is performed on real-life surface mounting machines. The proposed algorithm is expected to reduce the assembly time of surface mounting machines and thus improve the productivity.