Browse > Article
http://dx.doi.org/10.6117/kmeps.2018.25.1.023

Effect of Solder Printing Conditions and External Factors on Printing Efficiency  

Ha, Chung-Soo (Department of Nanobiotronics, Graduate School of Hoseo University)
Kwon, Hyuk-Ku (Department of Nanobiotronics, Graduate School of Hoseo University)
Publication Information
Journal of the Microelectronics and Packaging Society / v.25, no.1, 2018 , pp. 23-28 More about this Journal
Abstract
Under the 4th Industrial Revolution, implementation of Smart Factory in the field of surface mounting is an emerging issue. In the field of surface mounting, many researches are going on in line with these changes. Among them, we analyzed the method of optimizing the solder printing process which is a core process and the influence of the external factors affecting the printing efficiency. In this analysis, the Big Data provided by the SPI Machine was used to approach the statistical method, and the possibility of predicting the result through simulation with reliable results was confirmed. I hope this study contributes a little to the Smart Factory implementation.
Keywords
surface mount technology(SMT); solder paste inspector(SPI); solder printing condition; external factor; response surface model(RSM);
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 S. Wang, J. Wan, D. Li, and C. Zhang, "Implementing smart factory of industries 4.0: an outlook", Int. J. Dist. Sensor Net., 12(1), 3159805 (2016).   DOI
2 S. Wang, J. Wan, D. Li, and C. Zhang, "Towards smart factory for industry 4.0: a self-organized multi-agent system with big data based feedback and coordination", Comp. Net., 101, 158 (2016).   DOI
3 M. H. C. Li, A. Al-Refaie, and C. Y. Yang, "DMAIC approach to improve the capability of SMT solder printing process", IEEE Trans. Elec. Pack. Manuf., 31(2), 126 (2008).   DOI
4 T. Oohori, K. Ishimoto, and A. Nakazono, "Component mounting system and component mounting method", U.S. Patent No. 20170231127A1 (2017).
5 K. Arai, M. Furusawa, J. Aoki, M. Takada, and M. Nakatsuma, "Flux, solder composition, and method for manufacturing electronic circuit mounted substrate", U.S. Patent No. 9,609,762 (2017).
6 C. Shea, M. Bixenman, T. C. Loy, D. Carboni, B. Sandy-Smith, G. Wade, and E. Hanson, "Quantifying the improvements in the solder paste printing process from stencil nanocoatings and engineered under wipe solvents", Proc. 36th Electronics Manufacturing Technology Conference (IEMT), Johor Bahru, Malaysia, 1, IEEE (2014).
7 V. Tsenev, V. Videkov, A. Stratev, and N. Geogiev, "Improved soldering of components with different thermal masses by hybrid printing of solder pastes", Proc. 40th Electronics Technology (ISSE), Sofia, Bulgaria, 1, IEEE (2017).
8 D. Heinemann, S. Knabner, and D. Baumgarten, "Single image camera calibration in close range photogrammetry for solder joint analysis", ISPRS-International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 27 (2016).
9 D. Espalin, D. W. Muse, E. MacDonald, and R. B. Wicker, "3D printing multifunctionality: structures with electronics", Int. J. Adv. Manuf. Tech., 72(5-8), 963 (2014).   DOI
10 D. Choi, S. Kim, and J. Yoo, "Determination of adequate solder volume using 3D solder joint configuration in SMT", J. Weld. Join., 14(2), 71 (1996).
11 Y.-G. Kim, and T.-H. Park, "Defect classification of SMD defect based on deep learning", Inf. Cont. Symposium, 15 (2017).
12 W. S. Seo, B. W. Min, J. H. Kim, N. K. Lee, and J. B. Kim, "An Analysis of Screen Printing using Solder Paste", J. Microelectron. Packag. Soc., 17(1), 47 (2010).
13 D. Shin, "3-D analysis and inspection of surface mounted solder pastes by point-to-surface assignment method using variable bounding box", J. Korean Soc. Prec. Eng., 20(3), 210 (2003).
14 H. C. Tae, C. Kim, and Y. J. Cho, "Algorithm to a Flexible Surface Mount Device", Korean Soc. Prec. Eng. Conference, 96 (2015).
15 M. Yeo, S. Choi, E. Kim, K. Jeong, and S. Kim, "Development of automation system to compose SMD Kit based on tension compensation of the reel film", Inf. Cont. Symposium, 194 (2017).
16 S. J. Lee, and J. P. Jung, "Lead-free Solder Technology and Reliability for Automotive Electronics", J. Microelectron. Packag. Soc., 22(3), 1 (2015).   DOI