• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.1056-1061
• /
• 1994

Adhesion between cord and rubber compound of brass plated steel cords pretreated at $80^{\circ}C$ in air and at $80^{\circ}C$ and 85% of relative humidity was studied. Surface change of brass with pretreatment was also studied. Brass was oxidized at thermal treatment and oxidation was accelerated with water at humid treatment. Adhesion of pretreated cords decreased with treatment period. The decreasing tendency of rubber coverage was severe. Decrease in adhesion properties due to brass oxidation was discussed relating to the overgrowth of zinc oxide layer.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.1
• /
• pp.73-85
• /
• 2003

Four different methods of reducing the heat transfer coefficients from experimental data under dehumidifying conditions are compared. The four methods consist of two different heat and mass transfer models and two different fin efficiency models. Data are obtained from two heat exchanger samples having plain fins or wave fins. Comparison of the data with the reduction methods revealed that the single potential heat and mass transfer model yielded the humidity independent heat transfer coefficients. Two different fin efficiency models - enthalpy model and humidity model - yielded approximately the same fin efficiencies and accordingly approximately the same heat transfer coefficients. The heat transfer coefficients under wet conditions were approximately the same as those of the dry conditions for the plain fin configuration. For the wave fin configuration, however, wet surface heat transfer coefficients were approximately 12% higher. The pressure drops of the wet surface were 10% to 45% larger than those of the dry surface.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.91-100
• /
• 2011

This study is to examine the PEG concentration, and drying humidity and drying periods of humidity-controlled drying(HCD) for conservation of waterlogged woods(Pinus densiflora S. et Z.), and dimension stability of HCD were compared with those of air-drying and vacuum freeze-drying(VFD). Dimension stability of vacuum freeze-drying was the most excellent, i.e., PEG crystal was uniformly distributed in woods. Increasing concentrations of PEG, dimension stability of HCD was increased and drying periods decreased. Dimension stability of HCD after the treatment with the high concentration(70%) of PEG soaking was similar to those of VFD after the treatment with the low concentration(40%) of PEG soaking. In conclusion, high concentration(about 70% in water) PEG solution was the most suitable as a pre-treatment for HCD of waterlogged woods. However, drying should be maintained with enough high humidity and longer period.

• Korean Journal of Food Science and Technology
• /
• v.21 no.2
• /
• pp.203-211
• /
• 1989

During hot air drying of root vegetables such as radish and sweet potatoes, shrinkage and casehardening occurred, and thereby the quality change appeared. Therfore the hot air drying apparatus in which air temperature, relative humidity and air velocity could be controlled was designed, and the drying and shrinking characteristics of radish and sweet potatoes were studied. Also the external factors that affected these characteristics were investigated. The whole drying process of radish and sweet potatoes could be divided into four different drying rate periods, namely constant rate period, first falling rate period, second falling rate period (a) and (b). The shrinking rate curve consisted of four periods nearly corresponding to drying rate periods. The shrinking rate slowly increased in the constant rate period, rapidly increased in the first falling rate period, and reached the highest value in the early period of the second falling rate period. The surface shrinkage was greatly affected by the thickness of sample, relative humidity and initial moisture content. The shrinking ratio was increased with decreasing thickness and increasing relative humidity and initial moisture content.

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.03a
• /
• pp.71-88
• /
• 2005

With biological organism brown pollutants layers are thickly formed on inner stone materials in Gyeongjuseokbinggo(Ice storage in Gyeongju). Some simples were taken from this layer and its chemical composition, mineral composition, salt and microstructures were analyzed. This study shows that the pollutants layer can be removed easily, because it attached softly in stone surface. But because of its serious weathering state the stone surface also can be removed during the removing process. The origins of brown layer are assumed to be the soil in the mound over the Seokbinggo and the coarse sandy soil in the entrance. For the preservation of the Seokbinggo Waterproof and replacement of the coarse sandy soil should take precedence over the remove works. Subsequently moistureproof works should be enforced.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.2
• /
• pp.105-111
• /
• 2004

In this paper, a new self-oscillated type high voltage power supply for the OPC(Organic Photo Conductor) charge is proposed, which has variable constant current source characteristics to improve the charge characteristic of the OPC roller. The proposed control method enables high quality printing characteristics regardless of the circumstance change such as ambient temperature or humidity by changing the current reference signal. To verify the proposed control method various experiments are performed.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.135.1-135.1
• /
• 2010

최근 고온에서 사용 가능한 PEMFC용 고분자전해질 막 개발에 대한 연구가 활발히 진행되고 있다. PEMFC가 고온에서 작동하게 되면 높은 성능과 많은 장점을 갖게 된다. PEMFC를 $100^{\circ}C$ 이상에서 운전하게 될 경우 백금 전극 반응을 향상시켜 고가의 백금 촉매 양을 줄일 수 있게 되고, 수소연료 속에 미량 포함된 CO에 의한 촉매표면 피독현상에 대한 내구성을 높일 수 있어 저 순도 수소연료 사용이 가능해 진다. 또한 가습장치와 수소 연료 개질장치의 부피를 줄일 수 있게 되어 전체적인 PEMFC 시스템이 단순화 된다. 현재 연료전지용 고분자 전해질막으로 DuPont사의 과-불소계 고분자 전해질막인 Nafion$^{(R)}$이 가장 널리 사용되고 있다. Nafion$^{(R)}$은 유연한 분자구조 안에 소수성이 강한 주사슬과 친수성을 나타내는 술폰산이 결합된 곁사슬이 존재하여 술폰화 곁사슬의 클러스터 둘레에는 친수성 영역이 형성이 되기때문에 소수/친수 상 분리가 잘되어 이온 클러스터 형성이 용이하지만 제조비용이 높은 단점을 갖고 있다. 특히, 전해질 막내에서 Bronsted base 역할을 하는 물에 의해 이온전도가 이루어지기 때문에 고온에서는 수분증발로 인해 성능이 급격히 감소된다. 따라서, 본 연구에서는 고온 저가습 조건에서 운전이 가능하고 Nafion이 갖는 문제점을 해결하고자, 내열특성이 뛰어나며 높은 수소이온 전도도 학보가 용이한 Sulfonated Poly(aryl ether)sulfone(SPAES) 고분자 전해질에, 고온에서도 수화성이 유지될 수 있도록 지르코니아를 황산화한 sulfated zirconia(s-$ZrO_2$)를 함침하여 복합 고분자전해질막을 제조하여 고온 저가습 조건에서의 수소이온 전도 특성에 관한 연구를 수행하였다. 개발된 막의 물리/화학적 특성은 water content(Wup%), 이온교환 용량(IEC, meq $g^{-1}$), 수소이온전도도(s $cm^{-1}$) 열 중량 분석(TGA), X선 회절분석(XRD) 등을 통하여 분석 및 관찰하였다. 내화학 및 열적 특성분석 결과, 황산화 반응공정으로 $ZrO_2$에 술폰산기가 안정적으로 결합하고 있음이 관찰되었으며, 본 연구에서 개발된 유 무기 복합막이 $250^{\circ}C$이상 열적안정성을 확보하고 있는 것으로 판단되었다. $100^{\circ}C$ 이하의 저온 영역에서, 일정 비율의 s-$ZrO_2$/SPAES막에서 이온교환용량(IEC)이 순수 SPAES 막보다 낮음에도 불구하고, water uptake가 증가함과 동시에 수소이온 전도도가 향상된 것을 관찰하였다. 또한, 고온에서는 수소이온이 자유롭게 이동할 수 있는 water channel을 형성하는 free water는 증발 하지만 s-$ZrO_2$와 SPAES의 술폰산기 사이에 강력하게 결합하고 있는 bound Water는 $100^{\circ}C$ 이상의 고온 영역에서도 존재하여, 비록 무가습 조건에서도 일정 비율의 s-$ZrO_2$/SPAES50 전해질 막의 경우, 높은 전도도를 나타냄을 관찰할 수 있었다. 따라서 본 연구를 통해 저가습 고온 적용을 목적으로 개발된 s-$ZrO_2$/SPAES50막은 우수한 내열 특성을 나타냄과 동시에 저가습 고온 영역($120^{\circ}C$, $50RH{\downarrow}$)에서 높은 수소이온 전도도를 유지하여, 고온 저가습 연료전지 운전에 적합할 것으로 사료된다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1461_1462
• /
• 2009

송전선로에 설취된 애자들은 지속적인 전기적 기계적 스트레스에 노출되어 있기 때문에 여러 환경적 요인으로 인해 애자 표면의 열화가 가속된다. 이와 같은 애자의 표면 열화는 dryband를 형성하게 되고 지속적인 애자 표면상의 dryband와 누설 전류 증가의 상호작용은 애자의 섬락를 일으키는 원인이 된다. 이러한 연구의 결과 고전압용 애자로 유입되는 누설 전류는 애자 열화의 정도를 평가할 수 있는 매우 중요한 parameter임을 알 수 있다. 따라서 고전압용 애자의 누설전류를 분석하고 취득하여 애자의 열화 평가 및 이로 인해 발생할 수 있는 결함 애자의 검출에 대한 연구가 절실히 요구되고 있다. 본 논문에서는 고전압용 애자 중 자기애자의 습도변화에 따른 누설전류 특성을 조사하기 위해 자체 제작한 실험 챔버, power transformer, 전류센서, 오실로스코프, PC등으로 구성된 실험 시스템을 구축하였고, 데이터 분석을 위한 S/W로서 LabView를 사용하였다. 그에 따른 실험결과로서 다양한 습도변화(30%~90%)의 경우 정상 애자련과 결함 애자를 포함한 애자련의 누설전류 데이터를 취득하여 본 연구에서 제시한 알고리즘을 통해 분석함으로써 정상 애자 내의 결함 애자 포함 여부를 판별하고 다양한 습도 변화시에 정상 애자련과 불량 애자련의 특징을 볼 수 있었다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.1
• /
• pp.37-43
• /
• 1982

Constant rate period, falling rate period and diffusion coefficient using filefish fillet as sample during drying in hot air drier were determined under controlled conditions of temperature, humidity and air velocity. Drying rate curve consisted of a short period of constant rate and two stages of falling rate period. When 1 to 3m/see of air velocities were applied, diffusion coefficients were in the range of 1.9130 to $2.6187\;{\times}\;10^{-6}\;\textrm{cm}^2/sec$ at $50^{\circ}C$. 2.4806 to $3.5342\;{\times}\;10^{-6}\;\textrm{cm}^2/sec$ at $60^{\circ}C$ and 4.3405 to $5.3042\;{\times}\;10^{-6}\;\textrm{cm}^2/sec$ at $70^{\circ}C$, respectively. Available lysine content was decreased by 15%. 16% and 20% in the fillet dried at $50^{\circ}C$, $60^{\circ}C$ and $70^{\circ}C$, respectively.

• Korean Journal of Materials Research
• /
• v.4 no.2
• /
• pp.159-165
• /
• 1994

Two kinds of humidity sensor are made, one by anodizing pure aluminum and the other by evaporation Sn02 on the anodized pure alumia film, and their electrical characteristics are investigated in various humidity atmosphere. The change of surface resistance with humidity of $AI_2O_3/AI$ and $SnO_2-AI_2O_3/Al$ sensors are found to be $1.40 \times 10^{-2}\Omega$/RH and $1.56 \times 10^{-2}\Omega$/RH, respectively. The hysteresis phenomena associated with the irreversibility of surface resistance-humidity is less in $SnO_2-AI_2O_3/Al$ sensor than in $AI_2O_3/AI$. It is concluded that $SnO_2-AI_2O_3/Al$ film can be used as humidity sensor in room temperature region because temperature dependence of surface resistance of the film is found to be as $0.56 \times 10^{-2} \Omega /^{\circ}C$ in O~ $20^{\circ}C$ range, where as $2.50 \times 10^{-2} \Omega /^{\circ}C$ in 40-$50^{\circ}C$.